LV-01 Bluetooth Headset LVTEL AirPods 6pro User Manual
- June 2, 2024
- LVTEL
Table of Contents
LV-01 Bluetooth Headset LVTEL AirPods 6pro
Packing Contents
Product Overview
Wear
Step1: Choose comfortable eartips Step2 : Wear it in your ear and adjust to a comfortable position put the right and left earbuds on the correct ear)
Power On
Auto Power On:
Open the charging case, earbuds will power on automatically.
Manual Power On:
Long tap on the touch control area of one earbud for 4s, the earbud will power
on and then earbud light will flash red for about 2-4 seconds, and the earbuds
will be automatically connected.
Power Off
Method 1
Put both earbuds into the charging case, and then close the case, the earbuds
will power off automatically.
Method 2
Long tap on either earbud for 6s under the power on condition, the earbud will
power off, and then the Bluetooth icon on the phone shows disconnect LVTEL
AirPods 6pro.
Specification
Auto Pairing
- Open the charging case, the earbuds will power on automatically, then the earbuds will connect to each other and wait to pair with your phone.
- Turn on your phone’s Bluetooth and search for “LVTEL AirPods 6pro”, the earbuds will automatically connect with your phone.
Single Earbud Mode
- Remove one earbud from the charging case (left/right) and close the charging case.
- Turn on your phone’s Bluetooth and select “LVTEL AirPods 6p earbuds will be paired with your phone
Phone Calls Control
Answer / End Calls: Double tap on either earbud
Reject Calls: Long tap on either earbud for about 1s
Note : The earbuds can be use individually or simultaneously
Music
Pause / Play:
Double Tap on either earbud
- Volume, Voice Assistant and
- Noice cancelling mode:
- Volume +: Single tap the right earbud
- Volume – : Single tap left earbud
- Noice cancelling mode: Long tap on the right earbud for about 2s
- Voice Assistant: Long tap on the left earbud for about 2
- Previous Track: Quick triple tap on left earbud
- Next Track : Quick triple tap on the right earbud
Charging Method
Charging for Earbuds:
Put both earbuds into the charging case and close the case. The earbuds are
charging and the LED power display on the charging case will move.
Charging for the case:
Use a Type-C charging cable to connect an adapter (not provided) to charge
your charging case. The charging case is charging when the red indicator light
flashes, once the charging case is full, the indicator light stays
red.(Charging time:1.5 hours)
Security Guidance
- Using earphones at medium to high volume levels may result in permanent hearing damage. For your safety, it is recommended that you adjust the volume to a low to medium level.
- Do not use the earphones while driving a car, riding a bicycle, or performing other activities that require you to hear the sounds around.
- Do not use the earphones during thunderstorms, as the earphones may not function properly under such conditions and increase the risk of being struck by lightning.
- The earphone may not function properly under high temperature or high humidity conditions. Do not use any caustic cleaners/oils to clean the earphones.
- If the earphone is accidentally immersed in water, do not turn it on until it is completely dry.
- Please use the original charging cable provided by the earphone manufacturer for charging and select the appropriate adapter.
FAQ
- Q: Why can’t these earbuds pair with my phone?
- A: 1. Please make sure the earbuds are fully charged and turned on.
- Please make sure your phone’s Bluetooth is turned on.
- If there is no problem with either of the above, please insert the earbuds into the earbud charging case again and close the case , keep it on for 1 minute, and open the charging case and reconnect the earbuds to your phone.
- Q: Why can’t the earbuds charge and disconnect even after I put them into the charging case and close the case?
- A: Please make sure the charging case is not in low battery, if the charging case is in low battery, earbuds can not be charged and not disconnected even though they are in the case. So, please use the type-c cable to charge the case fully.
- Q: Why is the music intermittent?
- A: First of all, please do not allow more than 33 feet (unobstructed) between your earbuds and your phone. If the distance is less than 33 feet, please note the following two tips:
- Please make sure there are no obstacles between your earbuds and your device.
- Please make sure there are no microwave ovens/Wifi transmitters around, they are more likely to generate electromagnetic interference and cause signal interruption
Warranty and Customer Support
If you have any issues, please feel free to contact us, and we will reply within 24 hours. We offer a lifetime warranty, if you are not satisfied with the quality, you can always contact us for a replacement or refund!
- Email: support@lvtel.net
- Phone: 814-420-2178
- Please have your order ID ready before contacting us.
FCC statement
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.