COSTWAY ES10269 Floor Fan User Manual
- June 2, 2024
- COSTWAY
Table of Contents
COSTWAY ES10269 Floor Fan
THISINSTRUCTIONBOOKLETCONTAINSIMPORTANT SAFETY INFORMATION.PLEASE READAND KEEP FORFUTURE REFERENCE.
Before You Start
Please read all instructions carefully.
Retain instructions for future reference
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area
in which they will be placed in use, to avoid moving the product unnecessarily
once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
Read carefully and retain this instruction for safe operation.
GENERAL SAFETY INSTRUCTIONS
- Do not connect the fan to the power supply until the fan has been FULLY assembled.
- Unplug the fan before adjusting it in any way.
- Never operate the fan if it has damaged or worn parts. In such circumstances, it should be handed over to qualified person for repair.
- Always position the fan on a stable and level surface.
- Do not spray anything into the fan.
- Do not use the fan near flammable substances or in areas where there is a risk of fire.
- To reduce the risk of electric shock, do not remove any screws.
- Do not insert fingers or other objects through the fan guard.
- Do not remain directly in the breeze created by the fan for long periods of time.
- If the supply cord is damaged, it must be replaced by qualified persons in order to avoid a hazard.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they ave been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- Ensure that the fan is switched off from the supply mains before the guard.
INSTRUCTIONS FOR SAFE OPERATION
- Fan should be used only at rated voltage. This fan is designed for a AC 220-240 V 50 Hz electric supply.
- Never insert fingers or any other object through the fan guard when fan is running.
- Unplug when not in use, or when moving fan from one location to another, and before putting on or taking off parts and before cleaning.
- Do not put your fingers through the openings. Do not let children put any objects into the front case.
- Do not use this fan outside or in a damp area such as bathroom.
- Do not place the electrical cord under a cover. Do not overlay the cord with little covers or such element. Place the cord in an area where there is no risk to stumble.
- The fan must always be unplugged when not operating. To unplug the heater, all the switches must be on the position “OFF”, and then the plug could be disconnected.
- Do not operate the fan in an area where gasoline is used orstocked, painting or such flammable liquids.
- If you need to move the fan, switch off and unplug it.
- If you need maintenance, please send the fan back to the agent.
- No part of this fan must be replaced by the user.
- The fan should not be opened up by the user.
- Be sure not to allow water or other liquid to enter the inside of motor.
- The fan must be placed on a flat surface.
- Need to check the power cord and plug is damaged regularly. If it’s damaged, must replace the power cord or plug by qualified expert agency to avoid hazards.
- The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
RATING INSTRUCTIONS
- Be sure the voltage of fan conforms with local power conditions before use.
- Adjust the speed by pressing the switch: 0-Stop 1-Low 2-Medium 3-High
- .Adjust the tilt angle by moving the fan guard.
WARNING: This appliance must be earthed.
Cleaning and care instructions:
- a. Always unplug the fan before cleaning.
- b. Do not allow water to drip on or enter the fan housing.
- c. Be sure to use a soft cloth moistened with mild soap solution.
- d. Do not use any of the following as cleaner, petrol, thinner, benzene.
- e. Always clean with dry cloth. Ensure that the fan is switched off from the mains supply before removing the guard.
Specifications
220-240 V ~ 50 Hz 160 W
Return / Damage Claim Instructions
DO NOT discard the box / original packaging.
In case a return is required, the item must be returned in original box.
Without this your return will not be accepted.
Take a photo of the box markings.
A photo of the markings (text) on the side of the box is required in case a
part is needed for replacement. This helps our staff identify your product
number to ensure you receive the correct parts.
Take a photo of the damaged part (if applicable).
A photo of the damage is always required to file a claim and get your
replacement or refund processed quickly. Please make sure you have the box
even if it is damaged.
Send us an email with the images requested.
Email us directly from marketplace where your item was purchased with the
attached images and a description of your claim.
Customer Support
USA office: Fontana
AUS office: Truganina
GBR office: Ipswich
ITA office: Milano
POL office: Gdańsk
DEU office: FDS GmbH, Neuer Höltigbaum 36, 22143 Hamburg, Deutschland FRA
office: Saint Vigor d’Ymonville
If you’re having difficulty, our friendly customer team is always here to help.
USA: cs.us@costway.com
AUS: cs.au@costway.com
GBR: cs.uk@costway.com
ITA : cs.it@costway.com
POL: sklep@costway.com
DEU: cs.de@costway.com
FRA: cs.fr@costway.com
ESP: cs.es@costway.com