Sekey 2m Umbrella Large Beach Instruction Manual
- June 2, 2024
- Sekey
Table of Contents
Sekey 2m Umbrella Large Beach
Important: Read before assembling! Retain for future reference!
Dear customer
Keep these instructions for future reference. if you give this product to
someone else remember to pass on these assembly instructions.
We hope you will be entirely satisfied with your purchase.
Your sekey team.
For Your Safety
- We recommend you not to use this umbrella in windy, rainy or snowy weather! The product may get damaged. Disassemble in time in case of bad weather conditions.
- When adjusting the umbrella position, no further person or objects may be located underneath the umbrella.
- Do not hang anything on the bar (breaking and injury danger).
- The umbrella may not be closed in tilted position.
- Immediately set tilted umbrella straight and close in case of approaching wind.
- Ensure that the umbrella is set on a solid, level base.
- Never use an umbrella for protection in severe weathers.
- Never leave children unsupervised. The umbrella is no toy. Make sure that your kids don’t climb on it. It might fall over!
- The umbrella stand used must be suitable for an umbrella of this size: 25kg for 2.4m; 20kg for 2m; 15kg for 1.6m. Ask an expert for advice when purchasing a stand.
- Never leave an opened umbrella unsupervised.
- Keep the umbrella away from sources of heat and open flames (such as garden patio heaters, barbecues, etc.).
Intended use
- The umbrella is designed for private use and is not suitable for commercial purposes.
Care And Storage
- Please notice before storage that the umbrella has been dried well and is clean.
- Clean the umbrella with a mild cleaning agent. Thereafter, dry it well. Use mild soap to remove smudginess as well. Never use cleaner containing solvent. These bleach the fabric and damage the fabric.
- Note: To avoid possible damages, never use alkaline or acidic cleaners as well as steam cleaners to clean the umbrella.
- Store the umbrella at a dry place with good wind protection and ventilation.
Unpacking and disposal
- Carefully remove all packaging material and dispose of it in the proper manner.
- Take care not to accidentally throw away any assembly material.
Assembly And Handling
- Insert the lower umbrella pole 5 into an umbrella stand (not included). Please notice that the umbrella stand must have a corresponding minimum weight (25kg for 2.4m; 20kg for 2m; 15kg for 1.6m).The lower pole 5 must insert into the umbrella stand for at least 40 cm. In case of ignorance of the instructions, the umbrella may fall over and this may cause injuries or property damages. Always make sure that the umbrella and umbrella stand have a solid and secure standing before the stretching.
- Open up the lever of the clamping device (4) in order to insert the upper pole 3 into the lower pole 5. Make sure that the upper pole inserts into the lower pole for at least 10 cm. Hold the umbrella straight and press the lever of the clamping device downwards so that both poles are firmly fixed to each other.
- Open the umbrella by pushing the sliding rail block 2 upwards until this engages audibly and thus the umbrella struts are stretched I.
- In order to be able to tilt the umbrella to the side, pull the joint protection ring 6 upwards and tilt the umbrella to the side.
- Press the button of the sliding rail block to close the umbrella.
Installation Prepration
Contact
HONGKONG UKING TRADING LIMITED
- Address: Room 63, 7/F, Woon Lee Commercial Building, 7-9 Austin Ave, Tsim Sha Tsui, Kowloon, Hong Kong
- E-Mail: customercare@ukingglobal.com
SEKEY LTD
- Address: 41 Cambert Lane, Manchester, England, M18 8HA
- E-Mail: customercare@ukingglobal.com
Scan
Documents / Resources
|
Sekey 2m Umbrella Large
Beach
[pdf] Instruction Manual
2m Umbrella Large Beach, 2m, Umbrella Large Beach, Large Beach, Beach
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>