COSTWAY TY580402 Foosball Table Instruction Manual

COSTWAY TY580402 Foosball Table

Product Specifications:

• Model Number: TY580402
• Language: Multilingual (EN, DE, FR, ES, IT, PL)
• Components: Various panels, play field, ball ring, scorer, player teams, legs, cross bars, screws, nuts

Product Usage Instructions

Before You Start

Prior to assembly, familiarize yourself with the instruction manual. Keep the manual for future reference. Check all parts and ensure the set is complete. Review the assembly method and follow the instructions step by step. It is recommended to assemble the product as close as possible to its final location to avoid unnecessary movement. Ensure the product is placed on a flat and stable surface. Keep packaging materials and components out of reach of children.

Assembly Steps:

1. Start by assembling the side panels and end panels.
2. Proceed to attach the play field and ball ring.
3. Install the scorer and player teams (Team A and Team B).
4. Attach the safety end cap, EVA bumper, hand grip, and legs.
5. Secure the cross bars in place using the provided screws and nuts.

Maintenance:
Regularly check for loose screws or parts. Clean the play surface with a damp cloth and mild detergent. Avoid using abrasive cleaners that may damage the product.

Frequently Asked Questions (FAQ):

Q: How do I contact customer support?
A: You can reach our customer support team via email at the following addresses: USA: cs.us@costway.com

Q: What should I do if I encounter difficulties during assembly?
A: If you face any challenges during assembly, please refer to the instruction manual first. If you still need assistance, do not hesitate to contact our customer support team for guidance and help.

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Before You Start

• Please read all instructions carefully.
• Retain instructions for future reference.
• Separate and count all parts and hardware.
• Read through each step carefully and follow the proper order.
• We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
• Always place the product on a flat, steady and stable surface.
• Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

PARTS

ASSEMBLY INSTRUCTION

1. Install the Ball Box into the slot, align the screw holes, and fix it with screws.
2. Align holes of the Scorer with holes on the End Panel, and press down the fixing fittings to secure it.
3. First align one of Side Panel with the holes on the two End Panels and fix them with screws. Don’t tighten too much until the last step is completed.
4. Align and insert the Play Field with slots of the End Panels on both sides until it snaps into the slot in the Side Panel.
5. Install EVA Bumpers into both ends of the Player Teams, and then pass the teams with the same uniform through the Side Panel holes at intervals. (As shown in the figure)
6. Pass the other end of the Player Teams through the corresponding holes of the other Side Panel, aligning the screw holes and locking the screws. Put the Hand Grip and Safety End Cap on both ends of the Player Team, and when in place, lock the Handle Grip with screws. (As shown in the figure)
7. Turn the table over, align the slanted Left/Right Leg and screw holes of the table from the inside, then tighten the screws, but not too tight.
8. Install the built-in Nut(#24) on the Cross Bar of the table legs, then align with the screw holes on the slanted legs on both sides and tighten the screws.
9. Align the L-shaped slanted legs and screw holes of the table from the inside, then tighten the screws, but not too tight.
10. Install the built-in Nut(#24) on the Cross Bar of the table legs, then align with the screw holes on the slanted legs on both sides and tighten the screws.
11. Install the built-in Nut(#24) on the Cross Bar of the table legs, then align with the screw holes at the lower end of the L-shaped slanted legs on both sides, and tighten the screws.
12. Flip the foosball table back to confirm its stability and correct installation, and then tighten all screws to make it stable and durable.
13. Fold it for storage after loosening screws.

Return / Damage Claim Instructions

• DO NOT discard the box / original packaging.
  In case a return is required, the item must be returned in original box. Without this your return will not be accepted.

• Take a photo of the box markings.
  A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.

• Take a photo of the damaged part (if applicable).
  A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.

• Send us an email with the images requested.
  Email us directly from marketplace where your item was purchased with the attached images and a description of your claim.

If you’re having difficulty, our friendly customer team is always here to help.

USA: cs.us@costway.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>