COSTWAY ES10159US Electric Towel Warmer Wayfair User Guide

June 2, 2024
COSTWAY

Home of delights
Towel Warmer Chauffe-Serviettes
ES10159US

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.

ES10159US Electric Towel Warmer Wayfair

Before You Start
⚠ Please read all instructions carefully.
⚠ Retain instructions for future reference.
⚠ Separate and count all parts and hardware.
⚠ Read through each step carefully and follow the proper order.
⚠ We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
⚠ Always place the product on a flat, steady and stable surface.
⚠ Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

IMPORTANT SAFETY INSTRUCTIONS

WHEN USING ELECTRICAL PRODUCTS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
Read all instructions before using.

DANGER
TO REDUCE THE RISK OF ELECTRIC SHOCK:

  • ALWAYS place the towel warmer on a firm flat surface.
  • ALWAYS unplug the unit from the electrical outlet immediately after using and before cleaning.
  • Do NOT expose this unit to rain or moisture.
  • For dry fabric items ONLY.

NOTE: The towel warmer has a 3-prong grounding to reduce the risk of electric shock, plug the power cord into a standard 120V electrical outlet that is easily accessible.
CAUTION: DO NOT attempt to defeat this safety feature. To do so could result in an electric shock hazard.

WARNING
TO REDUCE RISK OF FIRE, ELECTRIC SHOCK, OR SERIOUS INJURY TO PERSONS WHEN USING THE APPLIANCE FOLLOWS BASIC PRECAUTIONS INCLUDING THE FOLLOWING:

  • Be sure to read all instructions, warnings, and precautions carefully before using this product. Failure to do so could result in injury to you or damage to the unit.
  • Always unplug the unit from the electrical outlet immediately after use.
  • DO NOT use an appliance for anything other than its intended use.
  • DO NOT place or store the unit where it can fall or be pulled into a tub or sink.
  • DO NOT use an appliance for anything other than its intended use.
  • DO NOT place or store the unit where it can fall or be pulled into a tub or sink.
  • DO NOT place in or drop into water or other liquid.
  • DO NOT reach for a unit that has fallen into the water. Unplug it immediately.
  • Care should be taken so that objects do not fall into and/or liquids are not spilled onto the unit.
  • This unit should never be left unattended when plugged in.
  • Close supervision is necessary when this unit is used near children or disabled persons.
  • Use this unit for its intended use as described in this manual.
  • NEVER operate this unit if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, or damaged. Return the unit to a service center for examination and repair.
  • Keep cords away from heated surfaces. Do not wrap the cord around the exterior of the appliance or let the cord hang over a table or counter edge.
  • DO NOT use outdoors.
  • DO NOT alter the safety plug or use an extension cord with this device.
  • DO NOT operate with a voltage converter.
  • DO NOT touch hot surfaces.
  • DO NOT use accessory attachments not recommended by the manufacturer as this may cause injuries.
  • The towel warmer will automatically turn off after 60 minutes.

CAUTION
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING.

  • This product is intended for household use only.
  • To reduce the risk of injury, please note that this is not a toy. DO NOT allow children to operate or play near the towel warmer.
  • NEVER cover the unit while it is operating.
  • Always keep the cord away from high temperatures and fire. Perform regular recommended maintenance.
  • DO NOT attempt to adjust or repair the unit. Servicing must be performed by professional or qualified personnel.
  • Stop using this unit if there is an unusual noise or smell.
  • Unplug this unit when not in use for a long period of time, To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
  • Keep this unit out of reach of children. DO NOT allow children to use this unit without supervision.
  • DO NOT use outdoors. For indoor use only.
  • Condensation on the lid and interior of the unit is normal.

SAVE THESE INSTRUCTIONS
The lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing instructions in the literature accompanying the unit.)

UNIQUE FEATURES AND SPECIFICATIONS

Large capacity accommodates 2 large bath towels (45″ X 70″), a bathrobe, or personal blanket.
Single-touch control provides you with up to 60 minutes of warming.
The unit will automatically turn off after 60 minutes.
Hinged lid keeps both hands free when filling and emptying the towel warmer.
Double-walled insulated lid keeps heat in while staying cool to the touch.

NOTE: This appliance has a 3-prong plug. To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety feature. To do so could result in an electric shock hazard.

LOCATION OF PARTS AND CONTROLS

COSTWAY ES10159US Electric Towel Warmer Wayfair - LOCATION OF PARTS AND
CONTROLS

SET UP INSTRUCTIONS

  1. Open the lid and remove any packaging contents.
  2. Place the towel warmer on a hard, level, dry surface.
  3. Insert the plug into a standard 120V outlet.

HOW TO USE

  1. Insert the power cord into an electrical outlet.

  2. Open the lid and place only dry towel(s), a bathrobe, or blanket inside.
    CAUTION: Placing damp or wet towels inside the towel warmer can damage the unit and pose serious safety risks.

  3. Close the lid.

  4. Press the on/off button. The LED ring will tum red, indicating that the unit is heating.

  5. When the temperature of the interior surface exceeds 122 O F/50 O C, the hot surface indicator will light up. When lit, the interior surface of the towel warmer is unsafe to touch.

  6. 15 minutes is typically sufficient for heating 2 bath towels up to 45″ X 70″ each.
    NOTE: The towel warmer could reach approximately 266 O F/130 O C and remain hot for the duration of the heating cycle.

  7. Open the lid to remove the towel(s), bathrobe, or blanket.
    NOTE: To avoid damage to the unit, gently raise the lid when removing items.

  8. Press the on/off button at any time to stop or start the heating cycle.

  9. The unit will automatically tum off after 60 minutes.

  10. After the heating cycle is complete, the interior surface of the towel warmer will remain dangerous to touch until the hot surface indicator turns off.

TIPS FOR BEST RESULTS

  1. Use cotton or cotton blend towels, bathrobes, or fabrics.

  2. For fast and even heating, loosely pile 1 towel into the towel warmer.
    Tightly rolled or folded towels will take longer to heat thoroughly. Two towels will take longer to heat than one.

  3. Use only dry fabrics.
    CAUTION: DO NOT use damp or wet articles.

  4. Avoid using delicate fabrics that cannot withstand high heat. Any fabric indicating that a cool iron must be used may not be able to withstand the heat of the towel warmer, resulting in damage to the fabric and the towel warmer.

  5. Once the heating cycle has begun, keep the lid closed. This will prevent heat from escaping. 0pening the lid midcycle may result in slower heating times.
    NOTE: Condensation on the lid and interior of the unit is normal.

CLEANING AND CARE

CAUTION: Before cleaning the unit, turn the power off and unplug the unit from the outlet.

  • Remove the power cord from the electrical outlet before cleaning.
  • Wipe with a soft, dry cloth only when the unit is cool to the touch.

TROUBLE SHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION
No power ● Unit is not plugged in

● Unit is not turned on
● No power at unit| ● Plug unit in
● Press the power button
● Check circuits and fuses or try a different outlet
Peculiar odor| ● Unit is new
● If unit has been used regularly, the odor may be coming from inside the unit| ● Open the lid and let the product air out in a
cool, dry place for 12 hours.
● Remove the power cord from the electrical outlet, wipe inside unit with a dry cloth.

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions: (1)This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3 (B). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the customer service or an experienced radio/TV technician for help.

Return / Damage Claim Instructions
⚠ DO NOT discard the box / original packaging.
In case a return is required, the item must be returned in original box. Without this your return will not be accepted.
⚠ Take a photo of the box markings.
A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.
⚠ Take a photo of the damaged part (if applicable).
A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.
⚠  Send us an email with the images requested.
Email us directly from marketplace where your item was purchased with the attached images and a description of your claim.

Meet delights for your home here
USA office: Fontana
If you’re having difficulty, our friendly customer team is always here to help.
USA: cs.us@costway.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

COSTWAY User Manuals

Related Manuals