JY FURNITURE CD-5DR-W1 5 Drawer Dresser Instruction Manual
- June 2, 2024
- JY FURNITURE
Table of Contents
JY FURNITURE CD-5DR-W1 5 Drawer Dresser Instruction Manual
INSTALLATION INSTRUCTIONS
| Content | Slide number |
|---|---|
| 1 | Warning & Before beginning |
| 2 | Frame unit parts list drawers |
| 3 | Instructions for assembling drawers |
WARNING
-
This unit contains small parts which could be a choking hazard for small children. Children should be under adult supervision at all mess or serious injury could occur.
-
Always unload unit and raise adjustable feet prior to moving the unit. The weight of personal belongings can cause the unit to become unstable and either p or collapse. Serious bodily injury and/or damage to personal belongings may occur.
-
Do not overload unit. If any shelf, top, or boom of unit bows or bends, it is overloaded. The shelf, top, or bottom could collapse and cause serious bodily injury and/ or damage to personal belongings.
-
Do not climb or step on the unit. The unit may become unstable and either p or collapse. Serious bodily injury and/or damage to personal belongings may occur.
-
Do not mount or each anything to the sides, rear or front of the unit (unless indicated in instrucccones) as this can cause the unit to p. Serious bodily injury and/or damage to personal belongings may occur.
-
Do not stack units. Stacking of units can cause an unsafe p-over hazard which may cause serious bodily injury and/or damage to personal belongings.
-
Do not hang this unit on the wall. The product structure is not designed for wall hanging. Serious bodily injury, damage to personal belongings, and/ or damage to the wall
may occur. -
All units must be secured individually to wall stud using L-Brackets and Wall Screws provided. Hardware included is for use in wood studs only. If wall stud is not accessible
or is made of a different material, consult your local hardware store for appropriate mounting hardware. Failure to do so may create an unsafe tipping hazard that could
lead to serious bodily injury and/or damage to personal belongings. -
Follow proper safety procedures when using power tools and ladders (when applicable).
-
We recommend porting your work surface during assembly to prevent scratching or damage to product, table tops, wood floors, etc.
-
Li unit when moving. Failure to do so may damage floor or product.
BEFORE BEGINNING
- Please read all instructions carefully.
- Familiarize yourself with all parts (see “PARTS”) and check quantities.
- Follow all safety precautions (see “SAFETY PRECAUTIONS”)
Items you will need to provide for assembly:
DRAWER
| Name | Qty |
|---|---|
| 1 | Right Side Panel |
| 2 | Left Side Panel |
| 3 | Top Panel |
| 4 | Bottom Panel |
| 5 | Cleat |
| 6 | Back Panel |
| 7 | Right side Drawer (M) |
| 8 | Left side Drawer (M) |
| 9 | Back side Drawer (M) |
| 10 | Face Drawer (M) |
| 11 | Bottom Drawer |
| 12 | Right side Drawer (L) |
| 13 | Left side Drawer (L) |
| 14 | Back side Drawer (L) |
| 15 | Face Drawer (L) |
FRAME UNIT ASSEMBLY
-
Use a screwdriver to turn clockwise into plosion, insert the wooden dowel into the plosion of the holes as shown.
-
Place the le plate with the right plate with the notch facing up. Connect the top plate by turning the cam lock screwdriver, then connect the boom rack assembly in the same way.
-
Place the back on the frame assembly with the finish face down and align its top edge. Close the back to the frame using a screwdriver.
-
FRAME UNIT ASSEMBLY
-
Use a screwdriver to turn the holes clockwise into the plosion of the holes as shown in the figure
-
lace the drawer boom plate in the outer-to-inward groove in the deacon of the arrow then gotten the cam locks (B).
Connect the back plate of the drawer then use a screwdriver to secure the cam locks (B).
-
Place the drawer face part in the plosion of whitening the remaining cam locks (B) clockwise.
Similar large drawers
-
Sack the CAM key cover part manually by hand. Un-load the head part of drawer slider by pushing and pulling the plash part out as below picture Fit the head part of drawer slider to the le and right panels of the drawer close to the boom edge, screw the 4 threaded screws into place holes are available clockwise.
Similar large drawers
-
Each the slider to the le plate and right plate with a screwdriver clockwise plosion hole number 3, 8, 13, 18 and hole number 26 from up to below.
-
Place the drawer with the slider installed in the slider plosion on the cabinet pushing from the outside to the inside in the deacon of the arrow.
