Quico HC408 Hyperspeed Professional Ionic Hair Dryer Instruction Manual

Quico HC408 Hyperspeed Professional Ionic Hair Dryer

Product Information

Specifications

• Product Name: Hyperspeed Professional Ionic Hair Dryer
• Model Number: HC408
• Power Supply: 125 Volts A.C., 60Hz (household current)
• Safety Features: ALCI Safety Device with test button

Product Usage Instructions

Safety Instructions

1. Read all the instructions provided in the manual before using the hair dryer.
2. Keep the hair dryer away from water sources to prevent electric shock.
3. Always unplug the appliance immediately after use.
4. Do not use the hair dryer while bathing or near water-filled vessels.
5. Do not operate the hair dryer if it has a damaged cord or plug.
6. Do not direct hot air towards eyes or other heat-sensitive areas.

ALCI Safety Device Testing

1. After plugging in your hair dryer, press the reset button on the ALCI device.
2. Press the test button. The reset button should pop out, verifying the safety device’s operation.
3. To reactivate the ALCI safety device, press the reset button again.
4. Your hair dryer is now ready for use.

Frequently Asked Questions (FAQ)

• Q: Can I use this hair dryer near water sources?
  A: No, it is not safe to use this appliance near water sources. Always keep it away from bathtubs, showers, basins, or other vessels containing water.

• Q: What should I do if the plug does not fit in the outlet?
  A: If the plug does not fit fully in the outlet, try reversing the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING. KEEP AWAY FROM WATER.

DANGER
As with most electrical appliances, electrical parts are electrically live even when the power switch is off.
To reduce the risk of death by electric shock:

1. Always “unplug it” immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or other liquid.
5. If an appliance falls into water, “unplug it” immediately. Do not reach into the water.

WARNING
To reduce the risk of burns, electrocution, fire, or injury to persons:

1. An appliance should never be left unattended when plugged in.
2. Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water. Return the appliance to a service center for examination and repair.
5. Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
6. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
7. Never use while sleeping.
8. Never drop or insert any object into any opening or hose.
9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
10. Do not use an extension cord with this appliance.
11. Do not direct hot air toward eyes or other heat sensitive areas.
12. Attachments may be hot during use. Allow them to cool before handling.
13. Do not place appliance on any surface while it is operating.
14. While using the appliance, keep your hair away from the air inlets.
15. Do not operate with a voltage converter.
16. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
17. If the SUPPLY CORD is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
18. When the hairdryer is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hairdryer is switched off;
19. For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.

WARNING
Do not use this appliance near bathtubs, showers, basins or other vessels containing water.

SAVE THESE INSTRUCTIONS

Safety Instructions

1. The dryer is designed to work on ordinary household current only,125 Volts A. C., 60Hz. It is not intended for commercial use.
2. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

ALCI Safety Device
This appliance is provided with an appliance leakage circuit interrupter (ALCI) safety device built into the plug. This device is designed to make the appliance inoperable under some abnormal conditions, such as accidental immersion in water. The ALCI safety device is equipped with a test button so that its operation can be checked. This appliance should be tested before each use to confirm that the safety device is operational.

TO TEST:
After plugging in your hair dryer:

1. Press the reset button on the ALCI device.
2. Press the test button. The reset button will pop out. This verifies that the safety device is operating properly.
3. Press the reset button to reactivate your ALCI safety device.
4. Your hair dryer is now ready for use.

Note : This appliance may automatically trip when unplugged. If so, the appliance must be reset after it is plugged in.

1. Should the ALCI safety device trip (i.e., the reset button pops out) during use, press the reset button. Should the hair dryer fail to reset, call after sales service. Never operate this appliance if it has been dropped in water.
2. The dryer is designed to work on ordinary household current only (125 volts A. C., 60 Hz). It is not intended for commercial use.
3. This appliance is equipped with an automatic thermal limiter, which will cycle off when overheated and come back on when cooled down. If the appliance cycles off, unplug the cord for several minutes before restarting.

THIS MESSAGE ABOUT

• GROUND
• FAULT
• CIRCUIT
• INTERRUPTERS

CAN SAVE A LIFE!

*If you must use your hair dryer in the bathroom, install a GFCI now!**
Your local electrician can help you decide which type is best for you – a portable unit that plugs into the electrical outlet or a permanent unit installed by your electrician. The National Electrical Code now requires GFCIs in the bathrooms, garages, and outdoor outlets of all new homes.

Why do you need a GFCI?
Electricity and water don’t mix. If your hair dryer falls into water while it’s plugged in, the electric shock can kill you… even if the switch is “off.”
A regular fuse or circuit breaker won’t protect you under these circumstances. A GFCI offers you far greater protection.

A GFCI can save your life!
Compared to that, the price is small!

Don’t wait… install one now!
*GFCI is a sensitive device which reacts immediately to a small electric current leak by stopping the electricity flow.

1. High-speed Airsonic EC Digital Motor spins at 110,000rpm
2. Energy saving 1600 watts
3. Air intake system that generates airflow from the sides, rather than the back of the dryer
4. High-Tech Digital Sensor
5. On/Off switch
6. Heat button with 3 settings
7. Speed button with 4 settings
8. Lock-in cold shot button
9. Smart memory function
10. Superior lonic Conditioning System
11. Filter cleaning reminder
12. Magnetised washable removable rear filter
13. 3m professional power cord
14. Premium leather hanging loop for easy storage
15. Magnetised 97mm wide drying nozzle with heat protective sleeve
16. Magnetised 68mm slim styling nozzle with heat protective sleeve
17. Magnetised 135mm wide curl-enhancing diffuser

HOW TO USE

IMPORTANT:
Hair that has been heavily bleached or chemically treated should only use the low heat setting on this product. Please consult your hairdresser on using heated appliances if you have any concerns about the condition of your hair.

CAUTION:
Take care not to direct the airflow directly onto the skin (e.g. scalp, neck ears, face, etc.) as hot air from the appliance can, particularly if held too close, cause discomfort or even burn.

BEFORE USING

• Remove all packaging and point of sale labels before use.
• Remove plastic cover from plug before use (used to protect it from damage during transportation).

OPERATING INSTRUCTIONS

Wash, condition and towel dry your hair.

1. Make sure your dryer is switched to the (○) off setting before plugging into a 125V~ suitable power outlet.
2. Switch the dryer on by flicking the on/off switch to the (I) on setting.
3. Adjust the heat and speed settings by pressing the heat or speed buttons and cycling through until you’ve reached the desired heat/speed setting combination.
4. You can use the high heat andhigh speed settings for initial drying. And then switch to the low heat/speed settings as the hair begins to dry, for styling and scrunch drying.
5. To finish, press the cold shot button to rapidly cool the hair and set the style in place.
6. After use, turn your dryer off by flicking the on/off switch to the (○) off setting.

ADJUSTING THE HEAT SETTINGS
The are 3 heat settings that can be adjusted by pressing the HEAT button. Press this button once, twice, or three times to cycle through and adjust the heat settings. The red LED light will illuminate to indicate air temperature levels 1﹣2﹣3:

• HEAT SETTING 1 (• solid LED light) – Press the button once
• HEAT SETTING 2 (•• solid LED lights) – Press the button twice
• HEAT SETTING 3 (••• solid LED lights) – Press the button three times

NB – The air temperature will vary depending on factors such as:

• Speed setting selected; and.
• With or without attachment (DRYING concentrator, STYLING concentrator or DIFFUSER) on the dryer.

ADJUSTING THE SPEED SETTINGS
There are 4 speed settings that can be adjusted by pressing the SPEED button. Press this button once, twice, or three times to adjust the speed settings. The white LED light will illuminate to indicate air speed levels 1﹣2﹣3. To select the 4th and slowest speed setting, cycle back by pressing the button another three times until you see the LED light flash continuously. You will hear and feel the airspeed of the dryer change as you press the button each time.

• SPEED SETTING 1 (• solid LED light) – Press the button once
• SPEED SETTING 2 (•• solid LED lights)- Press the button twice
• SPEED SETTING 3 (••• solid LED lights)- Press the button three times
• SPEED SETTING 4 (• flashing LED light) – Cycle back by pressing the button another three times until you see the LED light flash continuously.

NB – The airspeed will vary depending on factors such as:

• Heat setting selected; and
• With or without attachment (DRYING concentrator, STYLING concentrator or DIFFUSER) on the dryer.

ACTIVATING THE LOCK-IN COLD SETTING
If you press the cold air button, the motor will automatically switch off the hot air and switch to a cooler air.

• To ACTIVATE the cold setting : click the cold air button within 1 second to switch on and lock-in the cold air.

To DEACTIVATE the cold setting :

• A. Click the cold air button within 1 second to switch off and unlock the cold air. This will return to the previous heat setting selected OR;
• B. Just press the heat setting button.

SMART MEMORY FUNCTION
This dryer features a smart memory function, which will automatically remember and resume your previous heat and speed setting preference from when it was powered off last time, saving time and hassle.

HOW TO STYLE

• DRYING
  Blast dry the hair by using your dryer with the DRYING concentrator nozzle, or without if you prefer and selecting the CARE styling mode = HEAT SETTING 1 (• solid LED light) + SPEED SETTING 3 (••• solid LED lights). Divide your hair into sections and dry one section at a time, or simply rough dry as needed.

• STRAIGHT
  Create a smooth straight look by using your dryer with the STYLING concentrator nozzle and selecting HEAT SETTING 2 (•• solid LED lights) + SPEED SETTING 2 (•• solid LED lights). Divide your hair into sections and hold the hair taut using a brush whilst directing the airflow down the hair shaft.

• VOLUME
  Create tousled natural-looking waves with lots of volume by using your dryer without the nozzle. Flip your head upside down. Grasp your hair at the roots and scrunch between your fingertips whilst drying. When dry, finger comb to arrange your hair as required. Keep it casual and tousled for maximum volume.

• CURLS
  Define, enhance andvolumise your natural curly, wavy or coily hair pattern, plus add volume to the roots by using your dryer with the curl-enhancing diffuser and selecting the DIFFUSE styling mode = HEAT SETTING 1 (• solid LED light) + SPEED SETTING 2 (•• solid LED lights). This assists in diffusing and softening the airflow, stimulating natural drying, while gently drying, styling and
  caring for your curls and taming frizz.

• EXPERT TIP
  Set your style with the lock-in cold shot button and finish with a spritz of light hold hair spray, for extra hold if needed.

CLEANING and MAINTENANCE

Blocked or clogged air intake vents will cause the dryer to overheat. The rear filter should be checked and cleaned on a regular basis – to help maintain clean airflow while blow-drying, optimum performance and prevent overheating.

FILTER CLEANING REMINDER
This dryer features a clever automatic cleaning alert after 1500 minutes of use, to help prolong the life of your dryer. Once the cumulative usage time of the dryer reaches 1500 minutes of use, the air speed/temperature indicators will flash at the same time, reminding you that the rear filter of the dryer needs to be cleaned. The indicators will stop flashing after 6 times and return to normal operation. If the filter isn’t cleaned, the cleaning reminder will activate again when you next switch the dryer on.
Switch off the dryer and unplug the power outlet. Allow to cool completely before cleaning or storing.
The rear filter is fully removable and washable for easy cleaning. And it’s magnetized design makes it much easier to remove and attach.

• Holding the handle of your dryer firmly in one hand, place your thumb and index finger on top of the 2x black lines on either side of the dryer (1 at front of dryer + 1 at back of dryer), where you see this icon .
• Pull the rear filter away from the dryer horizontally – as it’s magnetic you may need to use some force to remove.
• Lift the handle inside the inner rear filter and use it to pull out and remove the inner rear filter from inside the air inlet cover.
• Wash the air inlet cover and inner rear filter under running water, making sure all parts are fully dry before reassembling. You must clean both the air inlet cover and the inner rear filter to protect the service life of the motor.
• Using a soft brush, clean any hair, dust and other debris that may have built up on the back of the dryer.
• If overheating occurs, an automatic safety device will shut the dryer or the heat off to prevent damage or personal injury. If the dryer or heat turns off, unplug the cord and allow the dryer to cool for 15 minutes before restarting. Make sure the air vents are 100% clean.

Product Specification

• Product Name: Quico Hyperspeed Professional Ionic Hair Dryer
• Type No. / SKU: HC408
• Rated Power: 1875W
• Rated Voltage: 125V
• Rated Frequency: 60Hz
• Manufacture: Joint Star Inc. Ltd
• Address: Room 707, 7/F, One Portside, 29 Tai Yau Street, San Po Kong, Kowloon, Hong Kong

Warranty and after sales service

The product comes with a 1-year full warranty provided by Quico®.
For details or any enquiries, please contact us by email.

Email : [email protected]
Made in China
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

CAN ICES-003(B) / NMB-003 (B)
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different form that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>