maxtek 48X36 Large Mobile Whiteboard Height Adjustable User Manual
- June 2, 2024
- maxtek
Table of Contents
Mobile Whiteboard
User Manual
48X36 Large Mobile Whiteboard Height Adjustable
TWO PEOPLE REQUIRED
Before Assembly
When you unpack and prepare for assembly, please place the contents on a
carpeted or padded area to protect them from damage.
| Part | Qty | Name | Refer Picture |
|---|---|---|---|
| A | 8 | 6x40mm Screw | Note: The screws are pre-installed in both ends of the |
metal bars.
B| 4| 4x10mm Screw(Silver)|
C| 1| Screwdriver|
D| 1| Spanner|
E| 1| Wrench|
F| 2| Plastic Mat|
G| 2| 4x10mm Screw(Gold)|
H| 6| 6x8mm Screw|
I| Several| Spare Parts|
Tips for using the whiteboard
- Each whiteboard is covered with a plastic protective film that aims to protect the surface of the product. Please make sure that you have peeled it off before using.
- For the pens, it is recommended to use a water-based pen for all our whiteboards because of the special material of board (Please don’t use oil-based pens).
- For the board surface, if the board looks dirty, please wipe it with a damp cloth or wet tissue, or you can use the whiteboard cleaner/lightly-dampened alcohol, so the board can be used just as new after drying.
- Before using, check the board surface if it’s clean, no dirt, no water stains or no alcohol residue on it.
STEP 1:
Screw Part ③ into Part ⑥.(Auxlilary Tools: Part E) STEP 2:
Connect ② with ⑥ and tighten them with Part H （Auxiliary Tool: Part D) STEP
3:
Install ④ and ⑤ wih Part A(Auxiliary Tool: Part D) STEP 4:
Use Part B install Part ⑦ to Part ④ and then use Part G install Part ⑧.
(Auxiliary Tool: Part C) STEP 5:
Put the whiteboard into the shelf then insert the Part F.
STEP 6:
3 height options
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>