WEKOME V07 Vanguard Series Starshards Wireless Earphone Instructions
- June 2, 2024
- WEKOME
Table of Contents
**WEKOME V07 Vanguard Series Starshards Wireless Earphone Instructions
**
Product Diagram
Front
Back
Product Parameter
Product Name/Model : V07
Wireless version : BT 5.3
Chip Solution : AD6973D4
Frequency Response: 20Hz~20KHz
Impedance: 160
Input: 5V
Rated Power: 98db
Transmission Distance: 10m
Driver Unit: 13mm
Earbud Battery Capacity: 25mAn
Charging Case Battery Capacity: 300mAh
Charging times of the Charging Case: 3 times
Charging Port: Type-C port
Play Time : 4H
Standby Time: 75H
Charging Time: 1.5H
Product Weight: 48g
Charging Case Product Size: 575724mm
Product Color: yellow,black
Execution standards: GB 8898-2011
Operation
Power on/off
Power on: Press and hold for 1s and the blue light is on for 1s, take out
the earbuds from the charging case and the earbuds will turn on automatically.
Prompt tone: Power on
Power off: The earbuds will turn off automatically if not connected to
other devices within 3min; put the earbuds into the charging case and the
earbuds will turn off automatically
Prompt tone: Power off
TWS Pairing Instructions
- Please put the wireless earbud and mobile phone (or other wireless device) together
- Make sure that the earbuds are of enough power, open the charging case cover or take out the earbuds from the charging case, make sure that the left and right earbuds are connected, and then the earbuds can enter the pairing mode,
- Turn on the wireless connection function of the mobile phone (or other wireless devices), and search for devices, at this time the mobile phone will search for all nearby wireless devices, click the corresponding earbud name (click Connect when only one pairing name can be found), after successful pairing, users can use the earbuds for calls and music listening.
Touch Control Operation
Answer: Tap the function key of L/R earbud twice
Reject: Press and hold the function key of L/R earbud for 25
Previous song : Tap the function key of L earbud 3 times
Play/pause: Tap the function key of L/R earbud twice
Hang up: Tap the function key of L/R earbud twice
Cancel a call. Tap the function key of L/R earbud twice
Next song. Tap the function key of R earbud 3 times
Voice assistant: Press and hold the function key of the L earbud for 2s
LED Indicator
- Earbud in low battery: the earbud in low battery flashes red light slowly(every 5s)
- Earbud during charging : the red light is always on
- Pairing: the Land R earbud flash red and blue light alternately
Prompt Tone
Pairing succeeded: Paring
Power off: Power off
Low battery: Battery low
Power on : Power on
Cautions During Wireless Connection:
- Please keep the distance between the wireless earbud and your phone (or other wireless devices) within 1 meter, and the closer the better,
- Make sure the earbuds are placed in the charging case, Open the charging case and it will start connecting with devices:
- When the earbuds are taken out of the charging case, make sure that the left and right earbuds are connected,
- Do not close the charging case cover during connection;
- Make sure that the charging case is of enough power. If the earbuds cannot be powered on when opening the charging case, then put them back in the charging case and plug in the charger to charge it for at least one hour
Warnings:
- Do not use any abrasive detergent to clean this product:
- Do not heat this product or keep it close to a fire source, such as a cooking stove,
- Do not expose this product to direct sunlight for a long time,
- Do not dispose of this product in the fire to avoid explosion,
- Do not try to disassemble this product to make any modifications, for it does not contain any maintenance components,
- Do not use this product in the rain;
- If the product is not used for a long period of time, please store it in a dry environment, and charge it at least once a month to extend its life and avoid extreme temperatures and dust.
Ordinance Warranty
This product is under warranty for a period of twelve months from the date of
sale limited to normal use and maintenance of the machine parts, materials and
functions. Problems and failures verified upon further identification will be
provided with free repair.
This warranty does not apply:
(a) to a product that is out of warranty,
(b) to damage caused by operating the product outside the permitted or
intended uses described by WK;
(c) to a product that has been disassembled, repaired or refitted without
the authorization of WK
(d) if warranty card and proof of purchase cannot be presented;
(e) to damage caused by earthquake, fire or other external causes,
natural disasters, etc.
Note: The warranty does not include product transport costs and does not
provide on-site maintenance services
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular i
nstallation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Warranty Feedback Form (Tick off)
A. No sound
B. Sound quality deteriorates
C. Button malfunction)
D. Cannot pair with devices
E. Cannot charge
F. Ear cap degumming)
G. Wre damages not caused by users)
H. Others_____
Date of purchase____
Dealers of sale__
When does the problem occur____
User’s contact info_____