CAPITOL 110300 High Profile Knee Kicker Owner’s Manual

CAPITOL 110300 High Profile Knee Kicker

Specifications:

• Product Name: Capitol 110300 High-Profile Knee Kicker
• Adjustment Range: 17.5″ to 20.9″
• Material: Baked epoxy enamel finish
• Adjustable Teeth Length: Fully retracted to 1/2″ extension
• Bumper: Gel foam rubber, adjustable in four positions

Product Usage Instructions

Length Adjustment
To adjust the kicker’s length, follow these steps:

1. Depress the steel trigger at the front portion.
2. Pull the bumper and channel assembly out to the desired setting.
3. Ensure the trigger is fully seated in the closest stop and flush with the casting.
4. Test the security of the trigger by pulling back and forth on the bumper.

Vertical Adjustment
Adjust the steel teeth for different carpet types by rotating the adjustment dial on the front of the knee kicker. Choose the appropriate pin depth setting for your job.

Bumper Maintenance
Rotate the gel foam rubber bumper to distribute wear evenly. Do not use worn or damaged bumpers to avoid injury. Order a replacement if needed.

Care and Maintenance

1. Clear lint and carpet pile from nap grip with a small screwdriver periodically.
2. Apply light white grease occasionally to keep the channel operating smoothly.
3. Protect the kicker from damage by wrapping it in a cloth or towel when not in use.
4. Avoid letting the kicker teeth hit metal moldings or tack strips to prevent damage.

CAUTION. Follow instructions carefully to avoid personal injury or damage to carpeting. ALWAYS MAKE SURE THAT THE TRIGGER IS FULLY ENGAGED, AND SEATED FIRMLY IN THE INTERNAL “STOP” TO MINIMIZE THE DANGER OF COLLAPSE

INTRODUCTION

• Your Capitol® 110300 is precision engineered and manufactured to provide years of dependable service. Die cast aluminum parts are hand finished to ensure precise operation and appearance. Each 110300 is fully inspected for proper operation.
• Knee kickers are designed to be used in residential and light commercial installations. Professional installers and industry associations such as the Carpet and Rug Institute (CRI) recommend the use of power stretchers on large jobs and for heavy carpeting material. Capitol 110300 kickers are finished with baked epoxy enamel, which provides a hard protective coating.

LENGTH ADJUSTMENT

The Capitol 110300 High-Profile Knee Kicker adjusts from 17.5″ to 20.9″ to suit the individual installer’s preference and unique job conditions. To adjust the Kicker, depress the steel trigger at the front portion, then pull the bumper and channel assembly out to the desired setting. MAKE SURE THE TRIGGER IS FULLY SEATED IN THE CLOSEST “STOP”, AND THAT THE REAR PART OF THE TRIGGER IS FLUSH WITH THE CASTING. Test the security of the trigger by pulling back and forth on the bumper.

VERTICAL ADJUSTMENT

The large steel teeth can be adjusted to suit different types of carpet and carpet backings by rotating the adjustment dial on the front of the knee kicker. The teeth can be adjusted from the fully retracted position for light carpet and backings, to extending 1/2″ for heavy carpet and backings. Select the pin depth setting that is best for your job.

BUMPER

The gel foam rubber bumper is designed to cushion the impact to the installer’s knee, and must be maintained in perfect condition. The bumper can be mounted in four positions to distribute the wear evenly, by removing the four mounting screws, rotating the bumper, then reattaching. Do not use worn or damaged bumpers, as injury might result. Order a replacement bumper.

CARE AND MAINTENANCE

1. Remove lint and carpet pile from the nap grip occasionally with a small screwdriver to keep the nap grips clear. This will maintain the grip’s ability to engage the carpet nap.
2. Apply a light, white grease on occasion to the channel to keep it operating smoothly. Wipe off excess grease before using the kicker.
3. Give your kicker the care and protection you would to any precision professional tool. Many installers wrap their kickers in a heavy cloth or towel to protect the finish from being chipped or dented by other tools.
4. Avoid having the kicker’s teeth hit metal moldings or tack strips as damage to the teeth may occur.

REPLACEMENT PARTS LIST

Part No./Description

• 110300-01 MAIN BODY & DIAL ASSEMBLY
• 10-412-02 EXTENSION CHANNEL W/ 2 BALLS, 2 SPRINGS, BOLT, WASHER, & NUT
• 10-412-03 NAP-GRIP INSERTS (SET OF 3 W/ SCREWS)
• 10-501-07 BASE PLATE ASSEMBLY
• 10-501-08 PIN COVER
• 110300-06 BOTTOM PLATE W/ 10 SCREWS
• 10-412-07 KICKER TEETH (16)
• 10-422-08 TRIGGER ASSEMBLY W/ SPRING
• 110300-200 GEL BUMPER ASSEMBLY W/ 4 SCREWS
• 110300-10 BUMPER BODY

CUSTOMER SERVICE NUMBER: 1-866-435-8665

LIMITED WARRANTY

IF THE PRODUCT FAILS WITHIN ONE YEAR FROM THE DATE OF PURCHASE DUE TO A DEFECT IN WORKMANSHIP OR MATERIAL, CAPITOL® FLOORING PRODUCTS WILL REPAIR AND/OR REPLACE IT FREE OF CHARGE IF THE PRODUCT IS RETURNED TO THE RETAILER/DISTRIBUTOR WHERE IT WAS ORIGINALLY PURCHASED. THIS WARRANTY DOES NOT COVER NORMAL WEAR AND TEAR TO THE PRODUCT, OR ANY DAMAGE THAT RESULTS FROM ACCIDENT, MISUSE, ABUSE, OR NEGLIGENCE. CAPITOL’S OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIR AND/OR REPLACEMENT OF THE PRODUCT. LIABILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE OR LOSS IS SPECIFICALLY EXCLUDED, AND CAPITOL SHALL HAVE NO LIABILITY FOR ANY SUCH INCIDENTAL OR CONSEQUENTIAL DAMAGE. THIS WARRANTY IS VOID IF THE PRODUCT OR ANY OF ITS COMPONENTS ARE MODIFIED, ALTERED, OR IN ANY WAY CHANGED, OR IF THE PRODUCT IS USED IN A MANNER THAT IS NOT RECOMMENDED BY CAPITOL. IF THE PRODUCT IS USED FOR OTHER THAN PROFESSIONAL PURPOSES, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE IS EXCLUDED. NO EXPRESS WARRANTIES ARE GIVEN. BUYER ASSUMES ALL RISK OF USE, HANDLING, AND STORAGE OF THE PRODUCT NOT IN STRICT ACCORDANCE WITH THE INSTRUCTIONS.

FAQ

Q: How do I know if the bumper needs replacement?
A: If the bumper shows signs of wear, such as cracks or deformities, it should be replaced to maintain safety during use.

Q: Can I use the knee kicker on all types of carpet?
A: The knee kicker is suitable for residential and light commercial installations, but heavy carpeting may require a power stretcher for best results.

Q: Is it necessary to adjust the teeth for different carpets?
A: Yes, adjusting the teeth based on carpet thickness ensures proper installation and minimizes potential damage to the carpet backing.

CAPITOL® Flooring Products Dalton, GA 30720 Made in Taiwan • Fabriqué en Taiwan • Hecho en Taiwan
www.capitolflooringproducts.com
CUSTOMER SERVICE : 1-866-435-8665

References

• Capitol - Professional Flooring Installation Tools, Adhesives, and Accessories

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>