UGREEN U3204 USB 3.0 Switch Selector 2 PC Sharing User Manual
- May 15, 2024
- UGREEN
Table of Contents
USB 3.0 Switch Selector
2 PC Sharing 4 USB 3.0 Devices
USER MANUAL
Product introduction
The USB 3.0 switch solves the problem of sharing a set of mouse, keyboard,
printer, camera and other devices between 2 computers, supports up to 5Gbps
transfer rate, and is backward compatible with USB2.0 and
USB1.1 devices. Plug and play, no driver installation.
Features:
- 2 USB 3.0 type B connect and 4 USB type A Support left and right channel output
- One click to switch between two computers and USB devices Maximum transfer rate up to 5Gbps
- Compatible with many major operating systems such as Windows 7/8/10/11, Mac os, and Linux
- Low power consumption without external power supply Plug-and-play, free driver installation
Package list
USB 3.0 switch Selector | 1 pc |
---|---|
USB 3.0 Type A to Type B Cable | 2 PCS |
User manual | 1 PC |
**Specifications:
**
Operating Temperature range | 5°C~40C (23°F ~104F ) |
---|---|
Operating Humidity range. | .5~854RH (No Condensation) |
Storage Temperature | 207 ~60T (-4°F ~140F ) |
USB Version | USB1.1,USB2.0,USB3.0 |
Maximum transfer rate | Up to 5Gops |
Audio sampling rate | 48KHz |
Max. power consumption | 0.2W(No Load) |
Dimension(LxWxH) | .39.3×20.6×7.8″ |
Net Weight | 1459 |
Panel Descrition
- 4xUSB3.0 Type A Jack: Connect mouse,keyboard, printer, hard driver etc.
- USB type C jack-DC 5V power input
- USB 3.0 type B-Connect to a computer or laptop
- 3.5mm TRS jack-Connects to headphones or speakers
- Indicator light for input selection status: lndicate current selected input source.
- Input selection button: Press the switch to select input sources between PC1 and PC2.
Wiring Diagram
How to Use
- Connect the USB port of computer to the PC1 or PC2 input port on the rear of the theUSB 3.0 Switch Selector over a USB 3.0 cable(Included in the package).
- Connect the mouse, keyboard, USB storage, and printer to the USB 1~4 porton the front of the USB 3.0 Switch Selector.
- Connects headphones to 3.5mm jack of switch
- Switch between computer 1 and computer 2 through the buttons on the panel ordesktop controller.
Note: lf the USB device cannot be driven, please connect a 5V power supply.
Troubleshooting Guide
How should I do if I am unable to get the printer connected to this switch to work?
- Check if the printer cannot be detected no matter which computer you switch to?
- Ensure that the printer driver has been installed successfully.
- For better performance, please use a less than 6ft/1.8m printer cable, and it should be shorter for some older computers.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>