Kuyaon YD-01 Wireless Headphone User Manual
- October 30, 2023
- Kuyaon
Table of Contents
YD-01 Wireless Headphone
Product Information
The product is a wireless headphone that can be used to listen to music and answer calls. It has a wireless mode and an FM mode. It comes with a charging cable and can be charged using a USB port. The headphone has a low battery voltage warning and will automatically power off when the battery voltage is too low. It also has a SD card mode and an AUX IN mode.
Product Usage Instructions
General Usage
- Store and use this product in a normal temperature environment.
- Do not expose this product to rain or moisture.
- Do not throw, to avoid damage caused by falling products.
- Do not disassemble, repair and modify this product.
- Do not use chemical solvents to wipe the product.
- Do not arbitrarily discard or put in the fire, so as not to cause danger!
Power On/Off
- To power on the headphone, long press the power button for about 2 seconds. In wireless mode, the red lights will flicker alternately.
- To power off the headphone, long press the power button for about 3 seconds. In wireless mode, the indicator light will turn off.
Paring
- To enter pairing status, turn off the headphone and then power it on again. In wireless mode, the red lights will flicker alternately.
- When pairing is successful, a “Ding Dong” sound will be heard and the blue light will turn on.
- To disconnect from a connected device, short press the power button. The blue and red lights will flicker alternately.
- If the headphone is out of range, it will enter pairing status automatically. The blue and red lights will flicker alternately.
- If the headphone is out of range for more than 5 minutes, it will power off automatically.
- To adjust the volume, short press the volume button. To play the previous or next track, long press the track button.
- To play or pause music, short press the music button.
- To answer or reject calls, short or long press the call button, respectively.
- To redial the last number, double press the call button.
Battery Information
- The headphone has a low battery voltage warning when the battery voltage is lower than 3.3V.
- The headphone will power off automatically when the battery voltage is lower than 3.1V.
- When charging, the charging indicator will turn on and the red light will be on. When fully charged, the red light will turn off.
Mode Switching
- To switch to FM mode, long press the MEQ button for about 2 seconds. To switch back to wireless mode, long press the MEQ button for about 2 seconds again.
- To switch between wireless and SD card mode, short press the MEQ button.
Packaging items
- Wireless headphone
- Manual
- Charging cable
Precautions
- Store and use this product in a normal temperature environment;
- Do not expose this product to rain or moisture;
- Do not throw, to avoid damage caused by falling products;
- Do not disassemble, repair and modify this product;
- Do not use chemical solvents to wipe the product;
- Do not arbitrarily discard or put in the fire, so as not to cause danger!
Tips
In order to achieve the best sound quality headphones, please wear your
headphones normally, do not disassemble the hardware yourself, use dry, soft
cotton and so on.
We recommend that you take the following precautions:
- Please listen to the appropriate volume of music, to prevent the adverse effects of hearing.
- Do not use the product in the exposed liquid, wet or moisture in the environment.
- When the temperature exceeds the specified temperature range 0℃ to 40℃, do not operate the product. (If the range exceeds the specified temperature, turn off the device and allow the temperature to stabilize within the specified operating range.)
Instructions
No.| Function Realization| Headphone status| Operate|
voice prompt| Indicator
---|---|---|---|---|---
1| Power On| Headphone
Off
|
Long Press“
about 2s
|
”
| “Wireless| mode”| Blue and red lights flicker alternately
2|
Power Off
| Headphone on| Long Press“
about 3s
| ”| Power Off”| Indicator off
3|
Paring
|
Headphone off
| Enter Paring Status when Power On| “Wireless|
mode”
| Blue and red lights flicker alternately
4
| Pairing Successful| Paring| /| “Ding Dong”| Blue light on
5| Disconnect| connected| /|
“Dong”
| Blue and red lights flicker alternately
6| Auto Paring| Power Off| Auto pairing when power on| “ Ding Dong”| Blue light
on
7| Out of distance disconnect| Out of distance disconnect| Out of distance
disconnect headphone enter into paring status， Blue and red lights flicker
alternately headphone will be auto connected if move to working range within
1mins,or will automatics power off after 5mins without connection| “Ding Dong”|
Blue light on
8| volume adjustment| Playing
music
| Short press| 、| Maximum/Minimum Volume：D D”| /
9
| Previous Track| Playing
Music
| Long press“| ”| /| /
10
| Next Track| Playing
Music
| Long Press“| ”| /| /
11
| Paly/Pause
Much
| Playing
Music
|
Short Press“
|
”
| /| /
12| Incoming call prompt| Incoming Calls| /| Ling Ling⋯”| /
13| Answer Calls| Incoming Calls| Short Press“| ”| /| /
14| Reject Calls| Incoming Calls|
Long Press“
| ”| /| /
15| Redial the last number| On State| Double Press“|
”
|
/
|
/
16| Hangs up Calls| On Calling| Short Press“| ”| /| /
17| Low Electricity Prompt| On State| Battery voltage lower than 3.3V| Prompts
“please charge ”every 20s|
/
18
| Low Electricity Power Off| On state| Battery voltage lower than 3.1V|
“Power Off”
|
/
19| Charging Indicator| Charing| Red Light when Charging| /| Red Light On
20| AUX IN| Any status| One Plug in Headphone ,another plug into the audio
devices| “Power Off”| Indicator Off
21| Fully Charge| charging| Fully Charge| /| Red Light Off
22| FM Mode| Headphone On| Long Press “M/EQ” about 2s| “FM Mode”| /
23| Automatic Station Searching| FM Mode| Short Press“| ”| /| Blue light
flash
24| SD Card Model| Insert SD Card when on Wireless mode| Long Press “M/EQ”
about 2s| “SD Card Mode”| /
25| Wireless Mode| FM Mode| Long Press “M/EQ ”about 2s|
“Wireless
|
Mode”
| /
26| Turn on/Off LED light| Headphone On| Long Press 2 Second“ ”| /| LED light
on/Off
27|
Switching Sound Effects
| Playing Music Wireless Or SD Card Mode| Short Press “M/EQ”| /| /
FCC Statement
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.