Chiheng AIKE Bluetooth Remote Control Owner’s Manual

AIKE Bluetooth Remote Control
Owner’s Manual

Remote Shutter
‘Smart phone OS update or change in the future might lead to incompatible

AIKE Bluetooth Remote Control

Product illustration

Specifications

MODEL I Shutter

Battery

How To Use

1. Paring
   a. Turn on the shutter by switching the on/off button, the shutter will enter into pairing mode and indicator LED starts flash quickly at the same time
   b. Active the function on your phone and sourcing Thd devices around
   c. Select the device of “AB Shutter3” from the list and paring will be finished automaticaly in few seconds

2.  Select APP
   Use inbuilt camera APP to taking the photos via i Shutter or you can download the APP of ‘camera 360″ from Google play if in built camera cannot be supported, check the compatible device and APP in following instruction
   Key Word Search in Google Play and App Store “Camera 360”

3. Shooting Select a correct APP and press the proper button on the shutter for IOS and Android phones to taking the photos.

Compatible device

Compatible with Android 4.2.2 OS or newer and iOS 6.0 or newer

iPhone 5s/5c/5, iPhone 4s/4, iPad 3/2, iPad mini, Wad with Retina Display,
iPod touch 4th generation or newer.| |
Samsung Galaxy 52/53/54+, Note 1, Note 2, Note3+, Tab 2, Note 8, 10.1+ Moto X / Nexus 4,5,7+ / Xiaomi 15, 2S, 3+| |
Sony Xperia S
HTC New one and X+ Other android phones| not use|

FCC Warning
15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
   This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>