CINMOORE CM-BC2U Smart Battery Camera User Guide

CINMOORE CM-BC2U Smart Battery Camera

Thanks for Choosing Cinmoore Smart Battery Camera

What’s In The Box

• Camera x1

• Mounting Bracket x1

• Mounting Screws x1

• Charging Cable x1

• User Manual x1

• Quick Mounting Plate x1

• Waterproof cover xl

Instructions for installing the waterproof cover

Product Overview

Quick Start

Power Button

1. Press button for 3-5 seconds to turn on Device Playback Voice: The device has been turned on.
2. Double-click to reset the camera
   

Download the CINMOORE app from the App Store{iOS devices) or Google Play{Android devices)

Connect Camera

Reset Camera
Press Power button for 3-5 seconds to turn on Device playback Voice : The device has been turned on, Please use the APP to bind the device

Add Camera
Click the upper right corner”+”, and scan the QR code on the camera

Configure the network
Enter your home’s WIFI account and password on the APP (currently only supports 2.4GWIFI) then follow the onscreen instructions to complete the setup

Quick installation
Three ways to install the camera.
Put it on the table, Punched in the wall, magentas suck on the metal.

*install height: Suggested 2 meters, About 15°~20° downward

Charge The Camera

USB Type-C Charging Port App will remind you to charge your camera when the battery is low.

Indicator Light Status

Waiting for network

configuration

| Blue and Light flashing
Live streaming| Blue and Light breathing
Working mode| Blue
Charging mode| Purple and Light breathing
Fault| Red
Detection alarm| Red and Light breathing
Please wait| Red and Light flashing

Company Statement

1. We have tried our best to ensure the completeness and accuracy of the materials. If you have any questions or disputes, please refer to the company’s final explanation.

2. we will update the information content in a timely manner according to the product function. And regularly modify and update the products or programs described in this information.
   Updates will be added to the new version without notification.

3. The content of this material is for reference only for customers. There is no guarantee that it is exactly the same as the product. Please focus on the actual product.

4. The camera parts shown in this information are for illustration only. It does not represent the purchased configuration.

Operating conditions:
Temperature: -10° to 45°C (14° to ll3°F)
Humidity 95% or less (non-condensing)

FCC statements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(l)this device may not cause harmful interface, and (2)this device must accept any interference received, including interference that may cause undesired operation .

FCC Information

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
  To maintain compliance with FCC’ s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

FCC Conditions
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

CUSTOMER SUPPORT

support@superacme.com
*our company reserves the right to finalize product failure .
FCC ID : 2BFCP·CMBC2U

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>