Danfoss PR-SC4K Prosa Telemetry Solution Installation Guide
- June 4, 2024
- Danfoss
Table of Contents
ENGINEERING TOMORROW
Installation Guide
Danfoss Prosa telemetry solution
Type PR-SC4KDirect
Hardware installation
Antenna
PR-SC4 – 300B4325
PR-ANTGLASS LTE 30 2J5024P Antenna
Optional Antenna PR-ANTGLASS LTE 200 – 300B0131
Optional: 2 m long antenna in case of poor signal
Note: do not install antenna on metallic surface
Temperature sensors
Cable T4PSC4 4 Temp. Sens EKS221 3.5 m
EKS 221 NTC 10K
Digital inputs, voltage free contacts
Use pins 1 and 2 for connection
Power cable and status LED
Protection box
Use cable glands to maintain the IP65.
ProsaLink App
Android V5.0 or later
iOS 11 or later
Installation
Follow automatic steps to
Register yourself and activate the device by scanning QR code as seen to the
right.
Configurate your installation. For more information
www.prosa.danfoss.com
Scan the QR code on the label.
Hand over to end user
- In case you did the configuration for somebody else and captured his email address, he will receive an email with instructions on how to download, register in, and use ProsaLink App.
- First month of subscription is free of charge. Installers benefit from free access to ProsaLink and web server.
- Be sure you have activated your alarms (refer to My account \ notifications). Notifications are sent to your own credentials & E mails to your registered Email address.
WARNINGS:
- Installation of PR- SC4 mode:
- embedded into the equipment or installed in a protected enclosure (secure, no risk of electric shock)
- while the equipment is unplugged
- with double-insulated cable
- by qualified and skilled technicians only
- Operating temperature: Min. 0 °C, Max. 70 °C
- Ensure use of the Services is legal in the country where you reside, including specific usage and place of usage (mobile communication might be subject to certain restrictions)
© Danfoss | DCS (vt) | 2021.05
AN32391518563101-000601
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>