IMOUM DLJ04 Brushless 4 Inch Chainsaw User Manual

IMOUM DLJ04 Brushless 4 Inch Chainsaw

Product Information

Technical Specifications:

• Model: DLJ04
• Max. Cutting Diameter: 100 mm
• Guide Plate Length: 4 Inch
• Weight: 2.4 Lbs

BATTERY PACK:

• Battery Pack Type: Lithium-Ion
• Voltage: 21 V
• Capacity: 2.0 AH
• Working time: 50 Min
• Charging time: 1.5 H

Product Usage Instructions

Intended Use:

This machine is suitable for garden pruning, shrub pruning, small branch pruning, wood cutting, widely used in gardens, parks, farms, roads, pastures, orchards, greenhouses.

NOTICE: Any other uses or modifications to the machine are deemed to be improper usage and may result in serious physical injury. The manufacturer accepts no responsibility for damages attributable to misuse.

Understanding the composition of your chainsaw:

• Protective Baffle
• Safety Button
• Battery Pack
• Chain
• Guide Bar
• Cover Fixing Nut Start Switch
• Lubrication Button
• L-Shaped Chain Screwdriver Oil Can
• Brushless Motor

How to properly use the security lock

UNLOCK – LOCK – UNLOCK

NOTICE: When not using the chainsaw, please move the safety lock to the Lock position to prevent accidental injuries.

Our Safety Switch Advantages:

1. It can be easily operated by users, whether they prefer using their left hand or right hand.
2. Our chainsaw only requires the safety lock to be released, allowing the device to be operated by simply pressing the Start button. This reduces hand fatigue and improves work efficiency compared to traditional safety locks.

How to lubricate the chain:

Oiling System-Oiling the Chain:

• Oil Box
• Press

Instructions:

1. Add ordinary chain oil & lubricating oil to the oil box.
2. During the chain rotation, press the oil pump to deliver lubricating oil to lubricate the chain.

NOTICE: We recommend lubricating every 10 cuts.

How to adjust the chain tightness:

Please adjust according to the following tips:

1. Counterclockwise loosen the cover fixing nut can be, without removing the cover its.
2. Turn the cover screw by L-type chain screwdriver to adjust the chain tightness, make sure there is only about 0.3cm gap when pulling the chain, otherwise the chain will fall off or cause the machine to jam.
3. Tighten the cover fixing nut clockwise to finish the adjustment.

NOTICE: Do not continue to loosen the tightening screws!

Frequently Asked Questions

Q: Can I use any type of oil for lubricating the chain?

A: It is recommended to use ordinary chain oil & lubricating oil for optimal performance and maintenance of your chainsaw.

Q: How often should I lubricate the chain?

A: We recommend lubricating the chain every 10 cuts to ensure smooth operation and prolong the life of your chainsaw.

Q: What should I do if the chain becomes loose during operation?

A: Follow the steps outlined in the user manual to adjust the chain tightness. Ensure there is about a 0.3cm gap when pulling the chain to prevent issues like chain falling off or machine jamming.

Dear Customer：
Please read all safety rules and instructions carefully before operating this tool.
Product Questions or Concerns？Contact US：support@imoum.com

Electrical Safety

Always check the voltage of the power supply corresponds to the voltage on rating plate.

Product Information

Technical Specifications

4 INCH MINI CHAINSAW

Intended Use
This machine is suitable for garden pruning, shrub pruning, small branch pruning, wood cutting, widely used in gardens, parks, farms, roads, pastures, orchards, and greenhouses.

NOTICE: Any other uses or modifi-cations to the machine are deemed to be improper usage and may result in serious physical injury. The manufacturer accepts no responsibility for damages attributable to misuse.

Understanding the composition of your chainsaw

NOTICE：
To reduce the risk of serious personal injury, turn the unit off and remove the battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury.

How to properly use the security lock

NOTICE：
When not using the chainsaw, please move the safety lock to the “Lock” position to prevent accidental injuries.

Our Safety Switch Advantages

1. It can be easily operated by users, whether they prefer using their left hand or right hand.
2. Our chainsaw only requires the safety lock to be released, allowing the device to be operated by simply pressing the “Start” button. This reduces hand fatigue and improves work efficiency compared to traditional safety locks.

How to lubricate the chain

Oiling System-Oiling the Chain

1. Add ordinary chain oil & lubricating oil to the oil box.
2. During the chain rotation, press the oil pump to deliver lubricating oil to lubricate the chain.

NOTICE
We recommend lubricating every 10 cuts.

How to adjust the chain tightness

Please adjust the tightness of the chain before using the device. lf the chain is too loose or too tight, it is easy to cause the chain to fall off or the device to jam.

NOTICE： If the chain is slightly loose during the constant cutting process, please don’t worry, we can follow the steps below to adjust the chain tightness.

Please adjust according to the following tips：

NOTICE：
Slowly turn the screw to adjust the chain. If you want to fix the gap between the chain and the guide plate to ensure that it will not loosen during use, then forcefully tighten the cover plate nut.

How to remove the chain

Remove the chain

1. Loosen the cover retaining nut counterclockwise.
2. Lift up the protective baffle and remove the side cover.
3. Remove the guide plate and chain.

How to replace the replacement chain

Install the chain

NOTICE：
Confirm the chain tightness is proper. The appropriate tension is when the chain is tightly attached to the guide plate and can be pulled by hand with 0.1 inch. Please pull the guide plate by hand to ensure that it is fully fixed. If not, continue to tighten the bar tightening knob.

How to charge the battery with the charger

• Before using for the first time,the battery needs to be fully charged.
• Do not expose the battery to extreme conditions such as high temperature or shock, otherwise there is a risk of personal injury due to electrolyte leakage.
• Before charging, please check the surface of the battery to make sure it is clean and dry.

Use our included adapter to charge the battery, and it takes about 1.5 hours for a single full charge (note: the charging interface is at the position shown in the above figure).

How to troubleshoot

Cutting Skills

• When the chainsaw is running, keep your other hand at least 6 inches away from the cutting area of the blade, and the hand must not be put into the cutting edge.
• To ensure the best service life of the chain saw, please do not overload the equipment and do not cut branches with a diameter of more than 90mm(3.5 inches). Otherwise the chain may become stuck.
• To protect the battery pack in cold or wet weather, place it under waterproof clothing.
• Be sure to unplug the battery pack after the cutting is completed.
• Do not use this equipment on rainy days.

The use and care of chainsaws

1. Do not forced use the chainsaw. Apply the correct power tool for your applica-tion. The correct power tool will do the job better and safer at the rate for which it was designed.
2. Do not use the chainsaw if the switch can not be turned on and off. Any chain-saw that cannot be controlled with the switch is dangerous and must be repaired.
3. Disconnect the plug from the power source and/or the battery pack from the chainsaw before making any adjustments, changing accessories, or storing chainsaw. Such preventive safety measures reduce the risk of unexpected start.
4. Store unused chainsaws out of the reach of children. Do not allow people unfamiliar with chainsaws or these instructions to operate them. Chainsaws are dangerous in the hands of untrained users.
5. Maintain the chainsaw. Check for misalignment or binding of moving parts, broken parts and any other conditions that may affect chainsaw operation. If there is damage, have the chainsaw repaired before use. Many accidents are caused by poorly maintained chainsaws.
6. Keep cutting tools sharp and clean. Properly maintained cutting tools have sharp cutting edges that are less prone to knotting and easier to control.
7. Use the chainsaw and accessories in accordance with these instructions, taking into account the working conditions and the work to be performed. Using the chainsaw for operations different from its intended use may result in hazard-ous situations.
8. Children should be supervised to ensure that they do not play with chainsaws.

The use and maintenance of battery tools

1. Try to use the battery provided by the manufacturer to connect the device to use, to prevent the use of other batteries lead to the device can not work properly, or even can burn the device.
2. Try to use the charger specified by the manufacturer for charging. A charger suitable for one battery pack may create a fire hazard when used with another battery pack.
3. Do not disassemble the battery pack to prevent damage to the battery or even the risk of short circuit.
4. Protect the battery from heat, such as continuous strong sun-light, fire, water and moisture. Prevent the danger of explosion.
5. Use the chainsaw only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
6.  When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or fire.
7. Under abusive conditions, liquid may be ejected from the battery, please avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, seek medical help immediately. Liquid ejected from the battery may cause irritation or burns.
   CAUTION! RISK OF EXPLOSION!
   Never charge non-rechargeable batteries!
   Protect the rechargeable battery from heat,such as continuous strong sun- light,fire,water and moisture. Prevent the danger of explosion.
   Max.50°c

Safety Warnings for Charger

• Do not allow any liquid to come into contact with the charger. Danger of electric shock may occur.
• Do not place tools or chargers near the sink, washbasin, toilet, or any other places near water.
• Do not spill liquid of any kind on the chainsaw or the charger. Doing so may short out parts, cause damage to the product and create the risk of fire or electric shock.
• The most suitable temperature to charge the battery packs are between 68°F-77°F. During charging, batteries must be placed in well ventilated area.
• The chainsaw is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision instructions.
• Children must being supervised not to play with the appliance.
• Do not recharge non-rechargeable batteries!

Maintenance & Cleaning

Before cleaning and maintenance,always switch off the chainsaw and remove the battery.

• Clean the chain carefully after each use.
• Wipe the chain with lubricating oil and spray with metal protection spray. Do not spray the equipment with water or break it into the water, other-wise it may cause electric shock.
• Clean the machine casings regularly with a soft cloth, preferably after each use, keep the ventilator, motor room and equipment handle clean. Remove persistent dirt using a soft cloth moistened with soapsuds. Do not use any solvents such as gasoline, alcohol, ammonia, etc. Chemicals such as these will damage the synthetic components.

Environment

Faulty and/or discarded electrical of electronic apparatus have to be collected at the appropriate recycling locations.

Warranty Terms

The warranty period of this product is 12 months, this clause does not include the following points:

1. Any natural wear and tear, overload work.
2. Damage caused by lack of daily maintenance.
3. Improper use and other man-made damage.
4. A product modified or dismantled by an illegal repairman.
5. Severe impact damage.
6. Use non-original accessories and batteries.

Extend Your Warranty by 1 Year

Register your product within 14 days of purchase at www.imoum.com to extend your 1-year warranty by an additional year.

WEEE Recycling Instructions

Information on electrical and electronic equipment.
The following information is intended for private end users who use electrical and/or electronic equipment.

1. Separate collection of waste equipment.
   Electrical and electronic equipment that has become waste is referred to
   as old equipment. Owners of waste equipment must dispose of it separately from unsorted municipal waste. In particular, old appliances do not belong in the household waste, but in special collection and return systems.

2. Batteries and rechargeable batteries.
   As a rule, owners of old appliances must separate old batteries and accumula- tors
   that are not enclosed in the old appliance from the latter before handing them in at a collection point. This does not apply if the waste equipment is handed over to public waste management authorities and separated from other waste equip ment there for the purpose of preparation for reuse.

3. Options for returning old equipment.
   If you have old equipment, you can hand it in at the facilities set up and available by public waste management authorities for the return or collection of old equipment for the purpose of proper disposal of the old equipment.
   If necessary, it is also possible to hand in electrical and electronic equipment there for the purpose of reusing the equipment. For more information, please contact the respective collection or take-back point.

Extended function

This product can be combined with a tall pole to form a pole saw, allow-ing you to use the most cost-effective cost to meet the needs of users in different scenarios：

NOTICE：
The package does not include the extension height bar, you can visit the IMOUMLIVE brand store on Amazon to purchase this accessory!

Contact Us: support@imoum.com

Brand: IMOUMLIVE
Product name: 4-INCH MINI CHAINSAW
Model number: DLJ04
WEEE-Reg.-Nr. DE 95546078
Manufacture： Chongqing Mouma Keji You Xian GongSi
Address: 4-1，131Hao，Tian Chi Da DaoBa Nan Qu, 401320, Chongqing, China

EU Responsible Person：C&E Connection E-Commerce (DE) GmbH Address：Zum Linnegraben 20, 65933, Frankfurt am Main,Germany E-mail：info@ce- connection.de

References

• Connection | Sugata & Freunde: Das Blog fürs Wesentliche
• Imoum - DIY Garden Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>