Seetec ATEM156 15.6 Inch QuadSplit Monitor User Manual

15.6″ Quad Split Monitor
4 x 4K HDMI Inputs/ Outputs

User Manual

Product Overview
Thank you for using our broadcast monitor. This full hd monitor includes multi-screen split display, false color, zoom, display rotation, check field, center marker, safety marker, etc. With 4 HDMI inputs and outputs, it can be used with a switcher to meet  different user needs.

To insure best use of the unit, please read the user’s manual carefully.

CAUTION

1. Please use the adapter attached in the accessory, if necessary, please use qualified adapter.

2. Please do NOT expose this product directly in the sunlight, heat, and humid conditions.

3. Please keep the monitor away from the strong light while using this product to ensure the image effect and long-term use.

4. Please avoid heavy impact or drop onto the ground.

5. Please do NOT use chemical solutions to clean this product.
   Please wipe the monitor with a clean soft cloth to maintain the brightness of the surface.

6. No adjustable components are in the monitor. Please do not take apart or repair the unit by yourself, to avoid the damage of the product.

Product Features

◆ Full HD 1920×1080 resolution
◆ 4 x 4K HDMI Inputs and Outputs
◆ Ultra Vivid
◆ False Color
◆ Center Marker and Safety Marker
◆ Image Freeze: The current picture still (capture function)
◆ Display Rotate
◆ Check Field (Red, Green, Blue, Mono)
◆ Display Mode could set 1P, 2P-LR, 2P-TB, PIP, 4P
◆ Zoom: Upper Left, Upper Right, Lower Left, Lower Right, Center1, Center2
◆ Aspect Ratio could select Full, 16:9, 4:3, 5:4, 1:1
◆ Color Temperature (6500K, 5800K, 5500K, User, 9300K, 7500K)
◆ Panel buttons (F1～F4) function custom settings
◆ Front panel stereo earphone output

Product Description

• Front Panel Features

• Rear Panel Features

1.1 Panel Button Instructions

①. : Earphone jack output port
②. HDMI-1～HDMI-4: HDMI1～4 signal input selection
③. MENU: Bring up the main menu, confirm to enter the submenu and adjustment items
④. ＜: Press the ＜ key directly to call up the backlight adjustment item, then press the ＜/＞ key to adjust the value; Enter the menu for upward selection, or decrease/ adjust the selected parameter.
⑤. ＞: Press the ＞ key directly to call up the backlight adjustment item, and then press the ＜/＞ key to adjust the value; Enter the menu to select downward, or increase/ adjust the selected parameter.
⑥. EXIT: Confirm the adjusted parameters and return to the previous OSD menu
⑦. F1～F4: Custom button F1～F4
⑧. Power Indicator
⑨. Power ON/ OFF

1.2 Interfaces Instructions

1.3 Power Input Way

1. The DC 12V input power port on the back of the monitor supports 12~24V wide voltage and can be powered by a DC power adapter.
2. The battery plate on the back of the monitor is equipped with a battery for power supply. The factory default is equipped with a V-mount battery plate.

Remark: According to the different specification of the battery, the capability is different, and the working time for the monitor will be different. Higher capability (working time) will be longer.
Without the charging circuit design for the monitor, please remove the battery to charge with the battery charger.
Suggestion: Better to remove the battery if don’t use this product in a long time.

1.4 Style
● Desktop (U Bracket)

● Carry-on

1.5 Use with Switcher
Instructions with ATEM Mini switcher:
Connect 4 HDMI signal sources to this monitor (to help you preview the picture to avoid “blind cut” channel status), then loop 4 HDMI signals to the switcher, and then switch in and play out.

Button Shortcut Operation Instructions

2.1 F1 ～F4 Shortcut Keys Custom Function Settings
F1～F4 are custom shortcut function buttons, users can customize the function of the buttons.
Operation Mode: short press for shortcut key function operation, long press for entering shortcut key custom setting.

● Take F1 button for example and explain
Long press F1 button, the screen will display:

Use ＜ or ＞ key to selection:
Freeze Ultra Vivid False Color Check Field 2P LR 2P TB 2P PIP 4P Aspect Ratio Disp Rotate Anamorphic Zoom Safety Marker Center Marker Grid Marker Mute Select one of them, press the MENU key to confirm, and then enter the next F button to set.

(You can also set the F shortcut key function in the menu setting.)

2.2 The Quick Adjustment of The Analogs
Press the ＜ or ＞ key to call up the backlight adjustment item:

Then press the MENU key to switch the analog quantity: Backlight, Volume, Brightness, Contrast, Hue, Saturation, Sharpness.
Select one of them, press the ＜/ ＞ key to adjust the analog value, and then switch the analog quantity to adjust. After the adjustment, press EXIT key to confirm and exit.

Menu Operation Instructions

1. press the MENU key to enter the menu bar, use the ＜ or ＞ key to select the menu item, and press the MENU key to enter the secondary menu.
2. After entering the secondary menu, use the ＜ or ＞ key to select the adjustment item. Press the MENU key to confirm and enter the adjustment item, use the ＜ or ＞ key to adjust the parameter value. After adjustment, press the EXIT key to confirm and  return to the previous menu, and then enter the next step of selection and adjustment.

Menu Function Instructions

Picture

Under the User, the Red, Green and Blue of the image can be adjusted.
Red (0～255), Green (0～255), Blue (0～255)
(Use the  ＜ /＞ key to select the User, and then press the MENU key to enter the User menu.)
Color Effect| The Hue (0-100) and Saturation (0-100) of the three primary colors (Red, Green, Blue) and three auxiliary colors (Yellow, Cyan, Magenta) of the image can be adjusted.
(Press the MENU key to enter the Color Effect menu.）

Function

By sharpening the edge of images to help peaking focus operation when shooting.
Freeze| Off, On
Zoom| Off, Upper Left, Upper Right, Lower Left, Lower Right, Center1, Center2
(Center 1: magnify 4 times; Center 2: magnify 9 times)
Disp Rotate| 0°, 90°, 180°, 270°, H Mirror, V Mirror
False Color| Off, Mode1, Mode2, Mode3

Display

MENU key to enter the Display Function menu for parameter adjustment.
l Under the 2P LR, you can adjust:
LR Ratio (0～4)
l Under 2P PIP, you can adjust:
PIP Position (RB, MID, LT, RT, LB) PIP Transparency (0～10)
PIP Size (0～10)
Input Swap (Press MENU key to swap)
Select Region| When the display mode is multi-picture mode, you can select one  of  the  pictures  to  adjust  the  brightness, contrast, hue, saturation and other parameters of the picture.
Input| Perform signal input switching on the displayed screen. (Press the MENU key to enter the Input menu to switch the input source)
Information| View the corresponding screen input source information.
(Press the MENU key to enter the Information menu to view.)

Audio

picture as audio output.

Marker

Safety Marker| Off,  80%,  85%,  90%,  93%,  96%,  4:3,  2.39:1,  2.35:1, 1.85:1
---|---
Center Marker| Off, On
Grid Marker| Off, 3X3, 6X6
Line Width| 0～10
Line Color| Red, Green, Blue, White
Mask| Half, Black, Off

Setting

Language| English, 中文, 日本語，Français，Deutsche，Español Português，Italiano，русский
---|---
F1～F4| False Color, Check Field, 2P LR, 2P TB, 2P PIP, 4P, Aspect Ratio, Disp Rotate, Anamorphic, Zoom, Safety  Marker, Center Marker, Grid Marker, Mute, Freeze, Ultra Vivid
(You can customize the shortcut key function settings for F1～F4 of the key panel.)
Transparency| 0～255
OSD H Position| 0～100
OSD V Position| 0～100
Menu Time| 30～60s
Reset| Press the MENU button to reset, it will restore the factory default parameter settings.

Product Parameters

720p (60/59.94/50/30/29.97/25/24/23.98)
1080p (60/59.94/50/30/29.97/25/24/23.98)
3840×2160p (30/25/24), 4096×2160p (24)
Input Voltage| DC12～24V
Power Consumption| ≦12W
Unit Size| 372Lx262Hx28.4D (mm) (without bracket/suitcase)
Unit Weight| 1.57kg (without bracket/suitcase)
Working Temperature| -10°C～50°C
Storage Temperature| -20°C～60°C

Trouble Shooting

If there is any problem when using the unit, please try following ways to inspect and solve. Please contact us if you still could not solve it or have other problems.

make sure to connect the corresponding  input
◆ Without HDMI signal input| Check the signal source and output interface connect is correct or not
◆ Monitor is not be powered on| Check whether the power is connected, put the power switch to “ON”  position
◆ Supply voltage instability| Check the power adapter and the battery installation
● Image/color display abnormal| Trouble shooting
---|---
◆ HDMI cable poor contact| Replace the HDMI cable and try again
◆ The signal interfered by externaenvironment| Move to another environment to try again
◆ Menu color saturation adjustment closing| Enter menu to check color, or reset to factory settings
◆ Check Field set in mono or black & white| Reset Check Field, back to the color
◆ Image deformation| Reset the image aspect ratio
●  Speaker without sound| Trouble shooting
---|---
◆ The HDMI cable off or not connection properly| Confirm connected with the corresponding input port
◆ Volume adjustment was closed| ◆ Volume adjustment was closed
◆ HDMI cable poor connected
◆ HDMI cable poor connected| ◆ Volume adjustment was closed
◆ HDMI cable poor connected

■ Remark:
★ If there are still other problems, please contact our relevant personnel.
★ As we are improving our products features, so if there are changes without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>