MACHINIST B660-Windwalker-WIFI Gaming Motherboard User Manual

MACHINIST B660-Windwalker-WIFI Gaming Motherboard

Specifications

• Processor: Supports 12th/13th Generation Intel Core/Pentium/Celeron series processors
• Chipset : B660 Chipset
• RAM : Dual Channel DDR4 64GB (32GB*2)
• Display Interface : 1HDMI, 1VGA, 2*DP
• USB : 3USB2.0, 4USB3.2
• Ethernet : 1*2.5GbE LAN
• Wireless Interface : Wifi 6
• Audio : 1 (Mic-in, Line-outline-in)
• Fans : 14PIN CFAN, 14PIN SFAN
• Storage : 1NVME M.2, 4SATA3.0
• PCIe : 1*PCIe x16
• Size: 170*170mm
• Temperature Range: Humidity 5%~95%

Overview of Components
Package List:

• B660 Motherboard * 1
• SATA Cable * 1
• I/O Blocking * 1

Install CPU & Fan
Please install the CPU into the CPU socket as shown below.

Important:

Install Memory
The motherboard provides 2 DDR4 DIMM slots with a maximum capacity of 64GB.

1. Wrench the latches on both sides of the memory slot outwards.
2. Insert the memory into the slot by aligning it with the notch in the slot.
3. Flip the latches on both sides of the slot to lock the memory.

Important: Server memory and desktop memory cannot be used together.

Install Expansion Card
The motherboard provides a PCI Express 5.0 X16 expansion slot. Place the expansion card in an available PCI Express slot and press until fully inserted.

Important:

Back Panel Connectors

• USB 2.0 Port
  The USB port supports the USB 2.0 specification. Use this port for USB devices.

• USB 3.2 Port
  USB 3.2 supports the USB 3.2 specification and is compatible with USB 2.0 and 3.0 specifications with a speed of up to 10Gbps.

• DP Port
  The DP interface offers higher image quality and supports ultra-high resolutions up to 2560×1600 with a bandwidth of 10.8gbps.

• VGA Port
  VGA supports analog video signal transmission, high resolution, fast display rate, and rich colors.

FAQ

1. Q: Can I use server memory and desktop memory together?
   A: No, server memory and desktop memory cannot be used together in this motherboard.

2. Q: What is the maximum RAM capacity supported?
   A: The motherboard supports a maximum of Dual Channel DDR4 64GB (32GB*2).

B660-Windwalker-WIFI User’s Manual

Specifications

B660-Windwalker-WIFI

Processor| Supports 12th/13th Generation Intel Core/Pentium/Celeron series processors
Southbridge| B660 Chipset
RAM| Technology| Dual Channel DDR4
Maximum Capacity| 64GB (32GB2)
Memory Slot| 2DDR4
Rear I/O| Display Interface| 1HDMI, 1VGA, 2DP
USB| 3USB2.0, 4USB3.2
Ethernet| 12.5GbE LAN
Wireless Interface| Wifi 6
AUDIO| 1 (Mic-in, Line-out、Line-in)
Internal connector| CFAN| 14PIN
SFAN| 14PIN
Discharge Jumper| 1JBAT
ATXPWR Interface| 18PIN Power Socket；124PIN Power Socket
USB2.0(front)| 1
USB3.0(front)| 1
M.2| 1NVME M.2
SATA Interface| 4SATA3.0
JCOM1| 1
JCMOS Port| 1
FPANEL1| 1
BUZZER| 1
PCIe| 1PCIe x16
Environment| Temperature Range| Working Environment| Storage Environment

• Temperature：0～50°C
• Humidity ：5%~95%

|

• Temperature: -20~70°C
• Humidity: 5%~95%

Physical Size| Size| 170*170mm

Overview of Components

Package List

• B660 Motherboard * 1
• SATA Cable * 1
• I/O Blocking * 1

Install CPU & Fan

Please install the CPU into the CPU socket as shown below.

Important

• Make sure that the motherboard supports the CPU.
• Always unplug the power cord from the power outlet before installing or removing the CPU to prevent hardware damage.
• Please retain the CPU protective cap after installing the processor.
• Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage to the CPU may occur.
• Confirm that the CPU heatsink has formed a tight seal with the CPU before booting your system.
• Apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation.
• Whenever the CPU is not installed, always protect the CPU socket pins by covering the socket with a plastic cap.
• Locate the pin one of the CPU socket and the CPU. Once the CPU is positioned into its socket, place one finger down on the middle of the CPU, lowering the locking lever and latching it into the fully locked position.
• Do not force the CPU into the CPU socket before the CPU socket locking lever is lifted up, or damage to the CPU and CPU socket may occur.
• Connect the CPU heatsink’s 4pin fan power connector to the 4pin CPU fan header on the motherboard.

Install Memory

The motherboard provides 2 DDR4 DIMM slots with a maximum capacity of 64GB.

1. Wrench the latches on both sides of the memory slot outwards.
2. Insert the memory into the slot by aligning it with the notch in the slot.
3.   Flip the latches on both sides of the slot to lock the memory.

Important

• Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used.
• Always turn off the computer and unplug the power cord from the power outlet before installing the memory to prevent hardware damage.
• Memory modules have a foolproof design. A memory module can be installed in only one direction. If you are unable to insert the memory, switch the direction.
• The stability and compatibility of the installed memory module depend on the installed CPU and devices when overclocking.
• This motherboard provides two memory sockets and supports dual channel technology. Dual Channel mode cannot be enabled if only one memory module is installed.
  (Note: Server memory and desktop memory cannot be used together.)

Install Expansion Card
The motherboard provides a PCI Express 5.0 X16 expansion slot.
Place the expansion card in an available PCI Express slot and press the expansion card until it is fully inserted into the slot.

Important

• When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet to prevent hardware damage.
• If the expansion card is not installed correctly, it may cause a short circuit throughout the metal pins, which could burn out the expansion card or the motherboard.

Back Panel Connectors

• USB 2.0 Port
  The USB port supports the USB 2.0 specification. Use this port for USB devices.

• USB 3.2 Port
  USB 3.2 supports the USB 3.2 specification and is compatible with the USB 2.0 and 3.0 specifications. USB 3.2 transmission speed can reach up to 10Gbps.

• DP Port
  As a higher-definition interface than HDMI, the DP interface has higher image quality, can easily support 2560×1600 ultra-high resolution, and can transmit signals with a bandwidth of 10.8gbps.

• VGA Port
  VGA (Video Graphics Array) supports analog video signal transmission, high resolution, fast display rate and rich colors.

• HDMI Port
  The HDMI port supports 4K and 1080px. You can use this port to connect your HDMI-supported monitor.

• Wireless Port

• The onboard Intel Wi-Fi 6 wireless network card and Bluetooth 5.2 support, and the external antenna can receive signals better.

• 2.5GbE LAN Port
  The 2.5GbE LAN port provides Internet connection at up to 2.5Gbps data rate.

The following describes the states of the LAN port LEDs.

LAN Port LED Status Table

Audio Port

• Line-in Port
• The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc. Line-out Port
• The line out jack.
• Mic-in Port
• The Mic in jack.

Internal Connectors

F_PANEL1 Connector

Important
An incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it.

*4 SATA 3.0 Connectors**
These SATA 3.0 connectors are SATA 6Gb/s interface ports. Each SATA connector supports a single SATA device.

M.2 Slot

Insert your M.2 SSD into the M.2 slot at a 30-degree angle. Secure the M.2 SSD in place with the screw.

JCMOS1: CMOS Discharge

1. .JCOMS1 (Initial state) The initial state covers “1” and “2”. If you want to discharge, please go to the next step.
2. JCOMS1 (Discharge) Pull out the cap to cover “2” and “3”, and wait for about 3 minutes f or the discharge to complete.
3. JCOMS1 (restitute) After the discharge is completed, restore the initial state of the first step

Important
Always turn off the computer and unplug the power cord from the power outlet before discharging.

JCOM1: Serial Port Connector
The COM connector can provide one serial port via an optional COM port cable.

ATXPWR1, JATXPWR1: Power Connectors
With the use of the power connector, the power supply can provide enough stable power to all the components on the motherboard. Before connecting the power connector, make sure the power supply is turned off and all devices are properly installed.

Important

It is recommended that a power supply that can withstand high power consumption be used (at least 500W). If a power supply is used that does not provide the required power, the result can lead to an unstable or unbootable system.

CPU_FAN1, SYS_FAN1 : Fan Connectors

CPU_FAN is a interface for CPU radiator. The 4pin fan has PWM intelligent speed regulation function, which can intelligently control the fan speed based on load and temperature changes.

SYS_FAN is the system cooling fan interface, which is generally connected to the case fan. The 3pin fan has no PWM adjustment capability.

JUSB2: USB 2.0 Connectors

The headers conform to USB 2.0 specification. This connector allows you to connect USB 2.0 ports on the front panel.

FUSB3: USB 3.0 Connector
The header conforms to USB 3.0 and USB 2.0 specification. This connector allows you to connect USB 3.0 ports on the front panel.

BIOS Setup

• BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. BIOS identifies, configures, tests and connects computer hardware to the OS immediately after a computer is turned on.
• Its major functions include conducting the Power-On Self-Test (POST) during system startup, saving system parameters and loading the operating system, etc. BIOS includes a BIOS Setup program that allows the user to modify basic system  configuration settings or to activate certain system features.
• When the power is turned off, the battery on the motherboard supplies the necessary power to the CMOS to keep the configuration values in the CMOS.

Important
Because BIOS flashing is potentially risky if you do not encounter problems using the current version of BIOS, it is recommended that you not flash the BIOS. To flash the BIOS, do it with caution. Inadequate BIOS flashing may result in system malfunction.

BIOS Setup
The default settings offer the optimal performance for system stability in normal conditions. It is recommended that you not alter the default settings (unless you need to) to prevent system instability or other unexpected results. Inadequately altering the settings may result in the system’s failure to boot.
Important
BIOS items are regularly updated for better system performance. The items may be slightly different from the latest BIOS; therefore, the description is for reference only.

Enter BIOS Setup

• Entering BIOS Setup
• When the computer starts up, BIOS enters the self-test process. When the self-test is completed, the following message is displayed: Press DEL key to enter Setup Menu. At this time, Press key to enter the BIOS setup.
• If this message disappears before you press key, you can turn it off and then turn on your computer or press on the case to restart your computer. You can also press ++ at the same time to restart your computer.
• It is recommended to repeatedly press the “Del” key immediately after starting the computer to ensure that the computer can enter BIOS mode.

Important
Functions may vary depending on the product you have.

Reset BIOS
When you need to restore the default BIOS settings to resolve certain issues, there are several ways to reset the BIOS:

• Go to BIOS and press F6 to load optimized defaults.
• Short the Clear CMOS jumper on the motherboard.

Important
Be sure the computer is off before clearing CMOS data. Please refer to the Clear CMOS jumper section for resetting BIOS.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>