Nismile LN-HV002 Cordless Handheld Vacuum Cleaner User Manual
- May 15, 2024
- Nismile
Table of Contents
Nismile LN-HV002 Cordless Handheld Vacuum Cleaner
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS – FOR HOUSEHOLD USE ONLY READ CAREFULLY BEFORE USE – SAVE THESE INSTRUCTIONS
WARNING: To reduce the risk of injury, fire, electric shock, and property damage resulting from improper use of the appliance, carefully observe the following instructions. This unit contains electrical connections and moving parts that potentially present risk to the user.
-
DO NOT use if the fuselage is damaged.
-
DO NOT use it to vacuum any liquids.
-
DO NOT immerse in water or other liquids.
-
If the vacuum is damaged, discontinue use.
-
To avoid fire, explosion or injury, inspect the vacuum cleaner for any damage before use.
-
DO NOT use outdoors or on wet surfaces. Use only on dry surfaces.
-
If the vacuum cleaner is not working as it should or has been dropped, damaged, left outdoors, or immersed in water, Please contact us by email.
-
DO NOT handle the vacuum cleaner with wet hands.
-
DO NOT leave the vacuum cleaner unattended while powered on.
-
Keep the vacuum away from heated surfaces.
-
Always turn off the vacuum cleaner before connecting to charging.
-
DO NOT incinerate an appliance, even if it is severely damaged, as a lithium-ion battery may explode in a fire.
GENERAL USE -
Keep the charger cord away from heated surfaces.
-
Use only as described in this manual.
-
Keep your work area well-lit.
-
To avoid unintentional starting, always turn off the vacuum cleaner before picking it up or carrying it, and before attaching or detaching the charger, dust cup, filter, or any accessories.
-
DO NOT put any objects into openings.
-
DO NOT allow young children to operate the appliance or use it as a toy. Close supervision is necessary when any appliance is used near children.
-
DO NOT use without a dust cup and filter in place.
-
DO NOT use if airflow is restricted; if the air paths become blocked, turn off the vacuum cleaner. Clear all obstructions and power on again.
-
Keep the nozzle away from hair, face, fingers, uncovered feet, or loose clothing. Only use the manufacturer’s recommended attachments.
-
DO NOT charge at temperatures below 50°F (10°C) or above 104°F (40°C).
-
Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire. Store the appliance indoors. DO NOT use or store it below 37.4°F (3°C).
-
Ensure the appliance is at room temperature before operating.
DUST CUP / FILTERS/ACCESSORIES
Before turning on the vacuum: -
Make sure the filter is thoroughly dry after routine cleaning.
-
Make sure the dust cup and filter are in place after routine maintenance.
-
Make sure accessories are free of blockages and keep openings away from the face and body.
-
Use only Nismile brand filters and accessories. Using other brands will void the warranty.
GENERAL CLEANING -
DO NOT vacuum up hard or sharp objects such as glass, nails, screws, or coins that could damage the vacuum cleaner.
-
DO NOT vacuum up drywall dust, fireplace ash, or embers.
-
DO NOT use it as an attachment to power tools for dust collection.
-
DO NOT vacuum up smoking or burning objects such as hot coals, cigarette butts, or matches.
-
DO NOT vacuum up flammable or combustible materials (e.g., lighter fluid, gasoline, or kerosene) or use vacuum in areas where they may be present.
-
DO NOT vacuum up toxic solutions (e.g., chlorine bleach, ammonia, or drain cleaner).
-
DO NOT use in an enclosed space where vapours are present from paint, paint thinner, moth-proofing substances, flammable dust, or other explosive or toxic materials.
-
DO NOT immerse the vacuum cleaner in water or other liquids.
-
Use extra care when cleaning on stairs.
SAFE TO USE -
Under abusive conditions, liquid may be ejected from the battery. Avoid contact with liquid, as it may cause irritation or burns. If contact occurs, flush with water. If liquid contacts the eyes, seek medical help.
-
Store the appliance indoors. To maintain battery life, DO NOT use or store battery at temperatures below 37.4°F (3°C) or above 104°F (40°C).
-
DO NOT expose the appliance to fire or temperature above 266°F (130°C) as it may cause an explosion.
-
There are NO serviceable parts. To ensure safety, DO NOT modify or attempt to repair the appliance.
WHAT’S INSIDE
- A. Switch Key
- B. Display Lamp
- С. НЕРА
- D. Outer Filter
- E. Dust Bin
- F. 2-in-1 Cleaning Accessories
- G. Protective Cover
- H. Charging Cable
BEFORE USE
PREPARATION AND STATUS BEFORE USE
- Before the first use, the vacuum cleaner must be fully charged, even if it comes with a partial charge.
- Connect the vacuum cleaner to the charging cable and a 5V/2A charger.
- Plug the charger into a wall outlet.
- It takes approximately 4 hours to charge the battery completely.
SPECIFICATIONS
Charging Voltage | 5V/2A |
---|---|
Low Gear Suction | 10000PA |
High-grade Suction | 18000PA |
Battery Capacity | 2600mAh |
Product Size | 7272293mm |
Product Weight | 800g |
Energy Consumption | 120W |
Charging Time | About 4 hours |
USAGE AND STATUS
Light Status
Power Display
- After the 3 blue indicator lights flash 2 times together, the current battery level is displayed. After the battery level decreases, the 3 blue indicator lights turn off in turn.
Fully charged
- Three blue indicator lights are always on.
Low battery
- A blue light flashes
Charge
- The blue indicator lights flash in sequence, and the 3 blue indicator lights are always on when the battery is fully charged.
Blockage
- The 3 indicators flash together 5 times and then go out.
- Turn off the power and remove the blockage, then turn the power back on.
- NOTE: During first use, discharge fully to properly condition the battery. It takes approximately 4 hours to charge the battery completely.
HOW TO USE
- Press and hold the power button for 1 second.
- Run the nozzle over the surface to be cleaned.
- Choose the right accessories according to different usage scenarios.
- Rotate out the dust cup, remove the filter, and pour out the debris.
DISCARD DUST
- Remove the dust collection cup
- As shown in the figure, rotate the dust cup counterclockwise to the unlocked position , and remove the dust cup.
- Remove the filter components
- Remove the filter components by squeezing the protruding part of the filter components inside the dust collection cup with your hand and pulling upwards. USAGE AND STATUS
- Discard the dust in the dust collection cup
- Notification
- Please dispose of any fine debris, dust etc. that accumulates in the filter components regularly to maintain high suction power.
- Method of removal of the filter components
- Remove the filter components by rotating the filter cover part in the direction of the arrow and pulling out the inner Hepa filter.
- After removing, remove the rubbish and dust adhering to the various components.
- After cleaning the dust cup, please assemble it back to the vacuum cleaner. It is not disposable and can be reused. If the HEPA is mouldy or damaged, you can contact us to buy new HEPA accessories if you want to replace them.
MAINTENANCE METHOD
- Always disconnect the charging adapter before operating on the machine.
- Do not pour water on the main machine or wash it with water.
- This can lead to short circuits, electric shocks or malfunctions.
- Do not use detergents, cleaners, bleach, chemical cleaners, volatile oils, thinners, alcohol, metal scrubs, hard scrubs or volatile substances.
- This can lead to discolouration, distortion, deterioration, damage or malfunction.
- Do not use a washing machine or dryer to dry products → This can lead to distortion or malfunction.
Main machine floor brush
- Use a cloth that has been wetted with water and then wrung out to wipe the dirt away.
- Wipe the heavy dirt with a cloth containing a neutral detergent for kitchen use diluted with water. Then wipe dry with a dry cloth.
- NOTE: Do not use a washing machine or dryer to dry products → This can lead to distortion or malfunction.
- Dust collecting cup filter combination
- Clean with water after removal of adhering rubbish
- HEPA filters are consumables. If it is still visibly dirty after cleaning, please replace it with a new HEPA filter.
- Do not use a washing machine or dryer to dry products → This can lead to distortion or malfunction.
- Can Water Scrubbing
- Dry thoroughly in a cool place
- Please dry sufficiently in a well-ventilated cool place, until the dust collection cup and HEPA filter are completely dry.
- Insufficient drying can lead to clogging.
- NOTE: Do not use a washing machine or dryer to dry products → This can lead to distortion or malfunction.
TROUBLESHOOTING
Problem | Remedy |
---|---|
Suction power stops the operation | • Is the filter clogged? Clean the |
filter. If the problem persists after cleaning, replace the filter.
• Is the access channel clogged by rubbish? Remove clogging rubbish.
Not working Damaged fuselage| • Check if the battery has enough power
• Please contact after sales E-mail: service@nismile.vip
The product occasionally fails to charge after use| The product is equipped with over-temperature protection. If you occasionally encounter a phenomenon that cannot be charged after use, it is recommended that you wait 20-30 minutes before charging the product.
CONTACT
- Shenzhen Lepower Electronic Co., Ltd.
- 3rd Floor, Building C, Shenli Industrial Park,
- Huaqing Avenue, Qinghua Community, Longhua
- Street, Longhua District, Shenzhen, China
- E-mail: service@nismile.vip.
- Model: LN-HV002
Before using, please carefully read this user manual. Please store it properly after reading it for future reference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>