SPECTRUM CONTROL Dual Line Common Mode Panel Mount Filter Instructions

Dual Line Common Mode Panel Mount
**Filter Instructions

**

Installation Guidelines

• Use a temperature-controlled soldering iron with tip temperature of 525 ± 10°F (275 ± 5°C).
• Use an SN 63 RMA flux core solder.
• Make mechanical wire connection.
• Use heat sink next to filter body where possible.
• Clean soldering iron tip.
• Clip end of solder (remove 0.5”) to expose flux for soldering.
• Apply soldering iron to wire/flag junction at wetted solder tip region of iron (Wetted Bridge Method).
• Immediately apply solder.
• Dwell time for soldering iron tip on product should be 3-5 seconds maximum.
• Terminals have been oriented to maximize clearance.

Threaded Style Filters

Filter
Thread Size| Max. Mounting Torque| Mounting Hole Dia.| Drill Size
---|---|---|---
In-lbs| Nm| (in)| (mm)| English| Metric (mm)
Apr-40| 1.5| 0.17| 0.12| 3.05| # 31| 3.1
Jun-40| 3| 0.339| 0.147| 3.73| # 26| 3.75
Jun-32| 3| 0.339| 0.147| 3.73| # 26| 3.75
Aug-32| 4| 0.452| 0.173| 4.39| # 17| 4.4
Oct-32| 4| 0.452| 0.19| 4.83| # 8| 5.1
28-Dec| 6| 0.678| 0.228| 5.79| # 1| 5.8
Dec-32| 6| 0.678| 0.228| 5.79| # 1| 5.8
1/4/2028| 7| 0.791| 0.261| 6.63| # G| 6.7
5/16/2024| 7| 0.791| 0.323| 8.2| # P| 8.25
5/16/1932| 7| 0.791| 0.323| 8.2| # P| 8.25
3/8/1932| 9| 1.017| 0.386| 9.8| # W| 9.9
7/16/2020| 14| 1.582| 0.453| 11.51| 29/64| 11.51

sales.eis@am.spectrumcontrol.com
+1814-474-1571

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>