hp X67765 Color LaserJet Enterprise Instruction Manual
- May 15, 2024
- HP
Table of Contents
hp X67765 Color LaserJet Enterprise
Specifications
- Product Name: HP Color LaserJet Enterprise MFP 6800, HP Color LaserJet Enterprise MFP X677, X67755, X67765
- Maximum Product Configuration Height: 127 cm (50.1 in)
Product Usage Instructions
CAUTIONS:
- Do not extend more than one paper tray at a time.
- Do not use paper tray as a step.
- Keep hands out of paper trays when closing.
- All trays must be closed when moving the printer.
Warnings:
The maximum recommended product configuration height is 127 cm (50.1 in). Exceeding this height by installing additional accessories is not recommended and could cause a potential tilt hazard.
FAQ
- Q: Can I stack multiple paper trays at once?
- A: No, it is not recommended to extend more than one paper tray at a time.
- Q: What should I do to avoid potential hazards when using the printer?
- A: Avoid using the paper trays as steps, keep your hands clear when closing them, and ensure all trays are closed when moving the printer.
INSTRUCTION
CAUTION: Do not extend more than one paper tray at a time. Do not use a paper tray as a step. Keep hands out of paper trays when closing. All trays must be closed when moving the printer.
HP Color LaserJet Enterprise MFP 6800, HP Color LaserJet Enterprise MFP X677, X67755, X67765
WARNING: The maximum recommended product configuration height is 127 cm (50.1 in). Exceeding this height by installing additional accessories is not recommended and could cause a potential tilt hazard.
HP Color LaserJet Enterprise MFP 5800, HP Color LaserJet Enterprise MFP X57945
WARNING: The maximum recommended product configuration height is 126 cm (49.6 in). Exceeding this height by installing additional accessories is not recommended and could cause a potential tilt hazard.
HOW TO USE
If you are attaching the accessory before installing the printer software, this procedure is not necessary. If you are attaching the accessory after installing the printer software, perform the following steps:
macOS: The list of installed options should automatically update during the first print job after installing the accessory.
Windows 11 and Windows 10
- Right-click on the bottom-left corner of the screen, or left-click the Start button for newer versions of Windows 10.
- Select Control Panel. Under Hardware and Sound, select View devices and printers.
- Right-click the name of the printer, and then select Printer Properties.
- Click the Device Settings tab.
- Select Update Now. Or, in the drop-down menu next to Automatic Configuration, select Update Now.
NOTE: Newer HP PCL-6 V4 drivers do not support Update Now. For these drivers, stop and restart the print spooler. Open a search box. In the search box, type services, and then press the Enter key. Right-click Print Spooler in the list of services, select Stop, and then right-click and select Start. Or, simply shut down and restart the computer.
Windows 7
- Make sure the printer is turned on and connected to the computer or a network.
- Open the Windows® Start menu, and then click Devices and Printers.
- Right-click the name of the printer, and then select Printer Properties.
- Click the Device Settings tab.
- Select Update Now. Or, in the drop-down menu next to Automatic Configuration, select Update Now.
Installation Instruction
© Copyright 2022 HP Development Company, L.P.