STELPRO SAHUB001 Allia Smart Home Hub User Guide

STELPRO SAHUB001 Allia Smart Home Hub

BEFORE GETTING STARTED

Choosing the location of your devices wisely will optimize Allia’s mesh network and promote efficient communication between the devices.
For more information, visitwww.stelpro.com/allia

PASSERELLE HUB

INSTALL AND CONFIGURE THE ALLIA APP

| |
---|---|---

CONNECT THE POWER SUPPLY AND ETHERNET CABLES

| Hub start-up.| | Connection to the Stelpro network established.
---|---|---|---

PAIR YOUR DEVICES WITH ALLIA APP

1. Click on the + in the device tab.
   

2. Select the type of device you want to add.
   

3. Enable the device’s pairing mode and click continue.
   

4. Configure the device added.
   Change the default name to a meaningful one.

5. Repeat the steps for each device that needs to be paired.

| | Pairing mode enabled
---|---|---
| | Device detected.
| Pairing complete.

COLOUR CODE

| Hub start-up.| | Hub update in progress.
---|---|---|---
| Update download in progress.| | Zigbee module update in progress.
| Reset (to default settings) in progress.| | No connection to the Allia network.
| Operational hub.| | No device paired with the hub.
| Hub in pairing mode| | Ethernet module connection problem.
| Device pairing in progress.| | Problem connecting with the devices
| Lit| | Blinking| | Flashes quickly
---|---|---|---|---|---

Visit our website to get more information or to learn everything there is to know about Allia.
www.stelpro.com/allia

Documents / Resources

| STELPRO SAHUB001 Allia Smart Home Hub [pdf] User Guide
SAHUB001 Allia Smart Home Hub, SAHUB001, Allia Smart Home Hub, Smart Home Hub, Home Hub
---|---

References

• STELPRO | Home page
• STELPRO | Page d'accueil

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>