SUNSMAI SWLR0001 Smart Window Cleaner Instructions

**SUNSMAI SWLR0001 Smart Window Cleaner Instructions

**

Thanks for purchasing Sunsmai SWLR0001 window cleaning robot.
We wish it orings you easier and more comfortable experience of home cleaning.

Note!

Read all documents before using.

The appliance is not to be used by children. Persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge may only use this appliance if they are supervised or have been given instruction about how to use it safely and understand what risks are involved. Children should be supervised to ensure they do not play with the robot.

!!! The appliance is for window cleaning with Frames (Frameless glass/window cleaning is not applicable). Users should judge and use it safely on proper operation sites, and be responsible for all possible consequences.

Safety Information

Application of Power Adatper and Batterys.

• Use only the power adapter supplied with this device. Use of other type of power adapter will result in malfunction and/or danger.
• Please use the proper electric outlet and make sure no heavy objects are placed on the power adapter or power cord.
• Allow adequate ventilation around the adapter when using it to operate the device. Do not cover the power adapter with objects that will reduce cooling.
• Do not use the adapter in a high moisture environment. Never handle the adapter with wet hands.
• Connect the adapter to a proper power source. The voltage requirements are found on the adapter.
• Do not use broken adapter, power cord or plug.
• Do not attempt to service the adapter. There are no service parts inside. Replace the whole unit if it is damaged or exposed to high moisture. Consult your dealer for help and maintenance.
• The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, short contact, heat above 60℃ (140℉)，or incinerate.
• If you have to dispose of this old equipment, please take it to the local recycling center for recycling electrical and electronic parts.
• Retain the safety and operating instructions for future reference.
• Follow all operating and use instructions.
• Do not expose your device to rain or excess humidity, and keep it away from liquids (such as beverages, faucets, and soon).
• Avoid exposing your device to direct sunlight or intense light source, and keep it away from heat source (such as radiators, space heaters, stoves, and so on).
• Do not place the device in the vicinity of strong magnetic fields.
• Keep the device and accessories away from children.
• Product operating temperature: 0℃~40℃ (32℉~104℉).

Risk of electric shock!

• Always switch the device off before carrying out any cleaning or maintenance work.
• Never pull the power plug out of the socket by the power cord; instead, pull it out by the power plug itself.
• Never perform repairs on your device yourself. Repairs to electric devices may only be carried out by authorized customer service center.
• Do not insert any pointed objects into the electric contacts.
• Do not change the contacts.
• Do not continue to operate the robot if the device itself or the power cord is damaged.
• Contact your local customer service in the event of damage.
• Do not clean the robot, the power cable in water or other liquids.
• Do not use the robot on damp ground or in places in which it can get into contact with liquids or be immersed in water.
• Do not use the robot in hazardous areas such open fireplaces, running showers or swimming pools.
• Make sure that you do not damage, bend or twist the power cord. Do not place any heavy obiects on top of the cord. This could damage the power cord and cause a fire or electrical shock.
• Drooping or bare cables, curtains, tablecloths or cords in the working area of the robot are to be secured in order to avoid damage to it or cause an electrical shock.

Warning

1. Fasten the safety rope and tie to indoor fixture before operating the device.
2. Check if the safety rope is broken or the knot is loose before operating the device.
3. Set danger-warning area downstairs for no-balcony window and door.
4. Battery shall be full-charged (green lamp ON) before using.
5. Do not use it in rainy or moist day.
6. Turn power on before put device onto glass.
7. Make sure appliance can stick and stand on glass surface while put onto glass.
8. Before turn power off，please hold device.
9. Do not use it on frameless glass.
10. Make sure put cleaning ring onto cleaning wheel correctly for no leakage.
11. Do not spray or pour water onto the appliance.
12. Prohibit children from using this device.
13. Remove anything on the glass. Do not use on cracked glass. Reflective or coating glass might be slightly scratched due to dirt on the glass while operating.
14. Keep hair, loose clothing, fingers, and all parts of body away from the openings and moving parts.
15. Do not use in areas with existed flammable or combustible liquids, gas.
16. Please use pure water, or use pure water diluted factory original detergent.

Do not use other detergent in the water tank.

About Window Cleaning Robot

GlassBot is a cleaning robot that works on multiple surfaces of glasses, tiles, smooth walls and tables. It works with a built-in vacuum motor that helps it suck air and stand on the glass surface. An embedded UPS (Un- interrupted Power System) prevents the robot falling from the window even when no electrical power.
With two wheels that freely traverse on the window surface or on wall surface, GlassBot cleans glass surface efficiently by the intelligent Al-technology path calculation. As well, it can be manually operated to clean under different modes from the remote control.

Features

• APP Control through IOS/Android system
• For glasses thicker than 6mm
• Al Technology
• Cleaning speed: 4minutes/meter^2.
• 4 kinds of automatic operation modes for cleaning entire window
• Auto-finish.
• Embedded UPS (Un-interrupted Power System)
• Anti-dropping control algorithm
• Auto detect edges of window
• Micro-fiber cloth
• High strength safety rope(150Kgf)
• Remote control
• Table cleaning mode

Specifications

Input Voltage: AC110-240V
Dimension: 291411.5cm
Net Weight: 0.95KG
Input Voltage:
AC100~240V, 50/60Hz Adaptor; 24V, 80W, 5.5m Cable
Built-in Li-ion battery, 600mAh 14.8V
Charging Time: 1hour
Water tank: 50mL

What’s in the package?

• Cleaner x 1 pcs
• Cleaning pads 14 pcs (7 sets)
• Remote controller x1 pcs
• Adapter (100~240VAC, 50~60Hz) x 1
• AC power cord x 1 pcs
• DC power extension cable (4 meter) x 1
• User Manual x 1
• Cleaning ring x 4
• Safety rope x 1

Know Your Glass Bot

Top View

1. Red Flashing: Abnormal
   Blue Flashing: Normal/Auto Spray
   Blue On: Normal/Manual Spray
   Orange On: Charging
   Green On: Full-charged.

2. Power Switch

3. Safety Rope

4. Power Jack

5. Air Vent

6. Buzzer

7. Bottom Red Light Flash: Abnormal
   Bottom Blue Light on: Normal

8. Sprayer

9. Hole Water Filling Nozzle
   

Spray water| Auto mode| By default, the robot runs for 5 seconds each time and then sprays water for 0.3 seconds. In the auto mode, you can select 5 seconds, 10 seconds, 15 seconds, and 20 seconds of water spray interval on the APP（Water can only be sprayed when the robot is running up or to the right）
---|---|---
Manual mode| Each time you press the water spray button on the remote control or APP, the machine can spray water for one time.（Water can only be sprayed when the robot is running up or to the right）
Indicator| Manual mode-Indicator keeps on, Auto mode-Indicator flashes
Note: When the robot is turned on, it is in manual mode by default

Know Your Glass Bot

Remote Control

The device can be remote controlled from the front and backside.

| Manual /auto sprayer switch
---|---
| Automatically move up then down
| Automatically move left then down
| Automatically move right then down
| Stop Cleaning
| Stop Cleaning
| Manual sprayer switch
| Manually move up
| Manually move down
| Manually move right
| Manually move left
| Start Cleaning

Auto Up then Down

Place the robot in the lower left corner of the window and press “START” or The robot will start moving from the lower side until it touches the upper edge, then move to the right side, then fine-tune its position downward and move to the left. After several left and right iterations the robot will finally stop at the bottom right cor er.
This is normal. It means the cleaning is done, and you can restart to continute if need.

Auto Left then Down

Place the robot in the upper right corner of the window and press “START” or  The robot will start moving from the left side until it touches the left edge, then fine-tune its position downward and move to the right. After several iterations of left and right, the robot will finally stop at the bottom left corner. This is normal. It means the cleaning is done, and you can restart to continute if need.

Auto Right then Down

Place the robot in the upper left corner of the window and press “START” or  The robot will start moving from the left side until it touches the left edge, then fine-tune its position downward and move to the right. After several left and right iterations, the robot will eventually stop at the bottom right corner. This is normal. It means the cleaning is done, and you can restart to continue if need.

※ Please remove the insulation spacer in the bottom of back of remote controller before using. If you have to replace the battery, just pull down the battery cover.

APP Control through IOS/Android system Scan QR Code for APP downloading from here.

iOS System:
Requires ios 7.0 or later.Compatible with iphone iPad, and iPod touch.

Android System:
Requires Android 4.3 or later, blue teeth 4.0 or later.

Android System
GLASSBOT2

iOS System
GLASSBOT2

Notes:
Make sure the SWLR0001 is switched on before connecting;
If it is not connected succesful, turn off the APP from device background, try again later.

Before Using

• The robot shall always connect power cable for normal using.

• How to put the robot onto glass to start using?
  (1) Turn on power-switch, and then make sure the fan is running.
  (2) Put device onto glass and keep 10cm away from the window frame.
  (3) Check if device can stick to the glass before releasing it.

• How to take device down from glass?
  (1) While device is running, please hold safety rope with one hand and take device down from glass with the other hand.
  (2) Turn off power-switch in safe area. Safety rope and buckle
  (1) Before using, check if the safety rope is broken or the knot is loose.
  (2) Fasten the safety rope and tie to indoor fixture before operating. UPS (Un-interrupted Power System) function
  (1) The UPS function will be enabled automatically when no electric power supplied. The backup time of this UPS is 30 minutes.
  (2) lf no electric power is supplied, the device will stop automatically, alert and flash red lamp. User shall take device down from the glass as soon as possible.
  (3) User can pull device back by pulling safety rope. Slightly pull the safety rope at an angle close to the glass to prevent dropping.

• Please make sure the battery was full-charged (green lamp ON) before using
  (1)First, turn off the power-switch on the device. Plug in the power. Orange lamp ON means charging.
  (2) Green lamp ON means the battery was full-charged.

• Table cleaning mode
  Put device on the table and select auto-cleaning mode, the device will run in table-cleaning mode.

• Notice

  1. Do not use it on frameless glass.
  2. Make sure put cleaning ring onto cleaning wheel correctly for no leakage.
  3. Do not use it in rainy or moist day.
  4. Set danger-warning area downstairs for no-balcony window and door.

How to Clean the Glass

Step I: Use ONLY clean-and-dry cleaning cloth to clean dust and sand on the glass.
Step II: Change again the cleaning cloth. Keep upper wheel’s cleaning cloth as clean-and-dry. Spray a little detergent (1~2 spray) on lower wheel’s cleaning cloth, but not make cloth wet (if too wet, the machine can’t move well). Then clean the glass again.

Power Adapter/DC Extension Cable

Using/Changing the Cleaning Cloth

1. Put clean-and-dry cleaning cloth onto cleaning ring.
2. Put the cleaning ring onto clean wheel and ensure the 6 slots on the ring are well fixed with the cleaner wheel to avoid air leakage.
   

Power connection

1. Plug in

2. Tighten the screw

Frequently Asked Questions (FAQ)

Q1: if Robot can not start up and alert at the beainning of use.

Ans: It means that the friction factor is not properly usedplease check: 1). Whether the cleaning cloth is too dirty or not. 2). Whether the glass stickers,window films on the galss affect the friction or not. 3). Whether the glass surface become slippery or not after several times cleaning 4). Whether the humidity of working environment is low or notthe lower humicity such as in air-conditioned rooms will affect the friction.

Q2: Robot slips and can not detect the upper frame of window in“Auto Up

then Down”mode

Ans: Press key and switch to or mode to continue cleaning.

Q3: Robot can not finish whole window and stop at middle area.

Ans: Press or mode to continue cleaning.

Q4: Robot slips and can not get higher to the window frame.

Ans: 1). Friction is too low that might be caused by glass stickers, window frame on the glass. 2). Cleaning cloth might be too wet. 3). Make sure Robot did not clean window many times, or the glass surface will become slippery. 4). If Robot clean several times in low humidity environment, the glass surface will become slippery. 5). Please keep Robot 10cm away from the window frame when start up.

Q5: Robot does not move smoothly or moves irregularly.

Ans: 1). Cleaning cloth is too dirty, please change the clear cleaning cloth. 2). Glass surface has different friction factor areas due to stickers, window film, please use it in single area 3). The screw of cleaning wheel might be loose, please tighten it.

Q6: After cleaning, remained circle mark on the glass surface.

Ans: Cleaning cloth is too dirty, please change the cleaning cloth and clean for the glass second time.

Q7: What to do if robot stopped at higher area while no electric power

supplied, it alerts and flash red?

Ans: 1). User can pull robot back with safety rope. Slightly pull the safety rope at an angle close to prevent dropping. 2). Press the power switch to“off”status. If the above problems cannot be reasonably resolved, or anything else need help, please call us by the direct line +86 19076195312 or email us by sunsmai0208@outlook.com. Thanks for your kindly note and attention ! 3). Check whether electric poor-contact, or cable broken.

Q8: What to do if robot abnormally stopped and flash red without alarm?

Ans: 1). Sliahtly pull the safety rope at an angle close to the glass to prevent dropping. 2). Check if any obstacle on the Glass and move the obstacle. 3). Check whether there is air-leakage caused by gap, or even window frames

Q9: When turn on the power switch, the fan does not work, and without

alarm.

Ans: If the blue indicator keeps flashing without alarm, it means battery voltgae is too low, please charge the robot for 1-2 hours.If the robot can not be used after charing, please contact the local distributor for inspection.

Q10: Robot does not stop automatically after fully cleaned.

Ans: Please press the Stop key on APP or remote control to stop the robot, then take it from the glass carefully.

Q11: When turn on the power switch, the fan works well, the blue indicators

on start button and at the bottom of robot flash first, then the red indicators flash, with alarm.

Ans: 1). Pease check the connection of the power supply, make sure the cables connect well. 2). Please check if Robot stands on the working surface well.

Q12: The robot does not spray water when cleaning.

Ans: 1). Pease make sure the water tank is flled up with clear water or degent liquids. 2). Please check the spray mode, if the mode isAuto mode, it will spray water as per spray mode, if the mode is Manual mode, please press the spray button on remote control or APP.

If the above problems cannot be reasonably resolved, or anything else need help, please call us by the direct line +86 19076195312 or email us by sunsmai0208@outlook.com. Thanks for your kindly note and attention!

Disclaimer

The manufacturer makes no representations or warranties, either expressed or implied with respect to the contents hereof and specifically disclaims any warranties, merchant ability, or fitness for any particular purpose. Further, the manufacturer reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify and person of such revision or changes.

The place and safety of this glass cleaning tool usage must be judged and responsible by user. But also need to follow the instructions in this user manual.

Product Warranty

If there are defects in your glass-cleaning robot due to faulty materials, workmanship or function within warranty period from the date of purchase or delivery, please contact your local retailers or local authorized dealers for repair or replacement.

Exclusions

This warranty will automatically become null and void and shall not be applicable to any purchased products if:

• Normal wear and tear (e.g. cleaning cloth, safety rope, etc).
• Reduction in battery discharge time due to battery age or use.
• Damage caused by assembling or installing that not in accordance with the instructions of manufacturer.
• Damage caused by using the glass-cleaning robot for any other purposes than normal domestic household.
• Damage caused by using parts and accessories which are not specified by the manufacturer.
• Damage caused by accident, abuse or misuse.

The Environment

The symbol on this appliance indicates that this appliance may not be treated as household waste. Instead it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this appliance, please contact your local city office, your household and waste disposal service or the shop where you purchased the appliance.

Contact Us

Should you have any questions about our products and services, please don’t hesitate to call us by the direct line +86 19076195312 , or contact us via sunsmai0208@outlook.com, we will handle all your problem within 24 hours.
Your feedback is vital to us! And we will always try to do better. (Write your Order number on the subject of the email, so that we can find your order and better assist your issue). Thank you!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>