SEALEY SSP54L Black Diamond Grip Extra Thick Nitrile Powder Free Gloves User Manual

SEALEY SSP54L Black Diamond Grip Extra Thick Nitrile Powder Free Gloves

Specifications

• Model No: SSP54L, SSP54XL, SSP56L, SSP56XL, SSP57L, SSP57XL
• Material: Nitrile
• Thickness: 10mil
• Certifications: EN ISO 374-1:2016+A1:2018, EN 374-5:2016, EN420:2003+A1:2009
• Notified Body: 2777
• Tested By: SATRA Technology Europe Ltd
• Certificate Number: 2777/22358-02/E02-01
• Colors: SSP54 (Green), SSP56 (Orange), SSP57 (Black)
• Sizes: L-XL (9-10)

Product Usage Instructions

Introduction

• Diamond Grip gloves are designed for various applications such as repair technicians, mechanics, and health and safety workers.
• The gloves offer greater elasticity and durability due to the extra-thick 10mil construction.
• They are chemical resistant and certified to various standards ensuring high quality.
• The raised textured surface enhances grip in wet and dry conditions and the gloves are powder-free for users with dermatological conditions.

Safety

• Perform a risk assessment before using the gloves.
• Consider other PPE requirements like safety glasses based on the task.
• Chemical resistance is tested under specific conditions and may vary in actual use.
• Check glove suitability for intended use considering workplace conditions.
• Inspect gloves for defects before usage.
• Ensure gloves fit comfortably without slipping or splitting.
• Visually inspect and decontaminate gloves after use.

Frequently Asked Questions (FAQ):

Q: Are these gloves suitable for prolonged chemical exposure?

• A: The gloves offer chemical resistance but actual use time can vary based on factors like physical properties changes and chemical degradation. Regularly inspect gloves during use.

Q: How should I clean the gloves?

• A: These gloves are disposable and not designed for cleaning or reuse. Discard them after a single use.

Q: Can these gloves protect against punctures?

• A: While the gloves provide some level of protection, they are not puncture-proof. Avoid sharp objects to prevent damage to the gloves.
• Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.

REFER TO INSTRUCTIONS

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

INTRODUCTION

• Diamond Grip gloves are ideal for repair technicians, mechanics, and health and safety work, among other uses. Greater elasticity and durability thanks to extra-thick 10mil construction.
• Chemical resistant and certified to EN ISO 374-1:2016+A1:2018, EN 374-5:2016, and EN420:2003+A1:2009. A raised textured surface vastly improves grip over regular disposable gloves in both wet and dry conditions.
• Powder-free for those with relevant dermatological conditions.
• Notified Body: 2777
• Tested By: SATRA Technology Europe Ltd, Bracetown Business Park, Clonee, Co. Meath, D15 F8PH, Ireland
• Certificate Number: 2777/22358-02/E02-01
• SSP54: Green SSP56: Orange SSP57: Black Sizes: 9-10 (L-XL)

SAFETY

• Always perform a risk assessment before using this product. Other PPE such as safety glasses may be required for the task at hand.
• This information does not reflect the actual duration of protection in the workplace and the differentiation between mixtures and pure chemicals.
• The chemical resistance has been assessed under laboratory conditions from samples taken from the palm only (except in cases where the glove is equal to or over 400 mm – where the cuff is tested also) and relates only to the chemical tested.
• It can be different if the chemical is used in a mixture.
• It is recommended to check that the gloves are suitable for the intended use because the conditions at the workplace may differ from the type of test depending on temperature, abrasion, and degradation.
• When used, protective gloves may provide less resistance to dangerous chemicals due to changes in physical properties. Movements, snagging, rubbing, degradation caused by chemical contact, etc. may reduce the actual use time significantly.
• For corrosive chemicals, degradation can be the most important factor to consider in the selection of chemical-resistant gloves.
• Before usage, inspect the gloves for any defects or imperfections.
• The gloves offer protection against micro-organisms and comply with the test requirements.
• The penetration resistance has been assessed under laboratory conditions and related only to the test specimen.
• Ensure the gloves fit the hands comfortably without slipping or splitting. The gloves should fit snugly around the wrist.
• After use, wearers should visually inspect the glove and remove any contamination from the outer surface before removing the glove from the hand.
• Alternatively, carefully peel the glove off the hand so that the contaminated glove outer does not touch the skin.

PERFORMANCE

AN ISO 374-1:2016+A1:2018 / Type B| Level| EN SIO 374-4:2019

Degradation %

---|---|---
40% Sodium Hydroxide (K)| 5| 10.0
30% Hydrogen Peroxide (P)| 2| 36.5
37% Formaldehyde (T)| 5| 17.5
AN ISO 374-5:2016| Level
---|---
Protection against Bacteria and Fungi| Pass
Protection against Viruses| Pass

MAINTENANCE

• NOTE: THIS GLOVE IS FOR SINGLE USE ONLY – NOT REUSABLE.

STORAGE

• Store in a cool, dry place, away from excessive heat (50oC).
• Opened boxes should be shielded from exposure to direct sun or fluorescent lighting.
• Transport in original packaging.

OBSOLESCENCE

• The life span is 3 years from the date of manufacture.
• This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.

ENVIRONMENT PROTECTION

• Recycle unwanted materials instead of disposing of them as waste. All tools, accessories, and packaging should be sorted, taken to a recycling center, and disposed of in a manner that is compatible with the environment.
• When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations
• Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications, and parts without prior notice.
• Important: No Liability is accepted for incorrect use of this product.
• Warranty: The guarantee is 12 months from the purchase date, proof of which is required for any claim.
• EU Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland
• UK  Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
• 01284 757500
• sales@sealey.co.uk
• www.sealey.co.uk
• SSP54L, SSP54XL, SSP56L, SSP56XL, SSP57L, SSP57XL Issue 2 (2,4) 27/11/23

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>