RONCO RE301 Wireless Emitter User Manual
- May 15, 2024
- Ronco
Table of Contents
RONCO RE301 Wireless Emitter
Please read this Manual carefully before using the product and keep it properly for future reference.
Product description
Package containing:
Emitter1,Bracket1,User Manual1, Screw1
Attention: Remove the battery insulation before use
RE301
Single-Channel emitter
RE302
2 Channel emitter
RE315
15 Channel emitter
Technical parameters
Product name: Wireless emitter
Product model: RE301 RE302
RE315
Product size: 1303715mm
Input voltage:3.0V
Transmission distance:
Exterior conditions>150m
Interior conditions>35m
Operating frequency:433.92MHz
Working temperature:-10℃~55℃
Working humidity:
10%~90%RH,no condensing
Features
- RE315 The displayed number is the chosen channel
- RE302 The indicator light is the chosen channel
- RE315 LCD Version channel lock operation(example:if the emitter only needs 4 channels, then lock the 4th channel, the emitter will be able to use channels from 0 to 4): Switch the screen number to 4th channel, press+and-simultaneously to let the number on the screen flashes 3 times, then release to finish the setting.Repeating this operation is also for canceling the channel lock function.
- RE302: All indicator lights on means group control channel.
- RE315:0 channel is group control channel.
- Group control channel:Take RE302 as an example,group control can control all the paired motors in 1, 2 channels.
Operation step
Keystroke
| Time| Description
---|---|---
| Long press 2 seconds| feature settings
| Once| Pairing
| Long press 2 seconds| Switch direction/ setting confirmation
| Long press 2 seconds| Speed regulation+
| Long press 2 seconds| Speed regulation
Warnings and precautions
- For fear of shortening the life of the emitter, please avoid dampness and bumps in use. If the emitter range shortens or the emitter becomes insensitive, please replace the old battery with battery of the same model and recycle the replaced battery
- Please do not use battery of different types for fear of explosion.
Legal Information
FCC ID:2A3UM-RE315
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on,the user is encouraged to try to correct the interference by one or more of
the following measures:Reorient or relocate the receiving antenna.Increase the
separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC: 30162-RE315
Innovation, Science and Economic Development (ISED) Canada Compliance Statement
CAN ICES‐3 (B)/NMB‐3 (B)
This device complies with Innovation, Science, and Economic Development 7 Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The warranty type
Type | Content | Warranty time |
---|---|---|
The whole machine | Remote control | 2 years |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>