BLACK DECKER IR1000 Compact Steam Iron Instruction Manual

BLACK DECKER IR1000 Compact Steam Iron

Specifications

• Model Numbers : IR1000, IR1010, IR1020S, IR1050
• Product Type: Compact Steam Iron
• Power Source: Electric For Household Use Only

Product Information:

The Compact Steam Iron is designed for household use and features a soleplate, spray nozzle, water-fill cover, SmartSteamTM dial, spray mist button, and power/auto shut-off light. It is equipped with safety features such as a polarized plug and tamper-resistant screw for user protection.

Product Usage Instructions

Getting Started

1. Open the water-fill cover.
2. Use a clean measuring cup to pour water into the tank until it reaches the MAX level mark. Do not overfill. Close the water-fill cover securely.
3. Place the iron on the heel rest.
4. To refill during ironing, unplug the iron and follow the above procedure.

Using Your Iron

1. Plug the iron into an outlet. The red Power/auto shut-off light will indicate that the iron is heating up.
2. Refer to clothing care labels for temperature settings.
3. Select the temperature and steam level by turning the SmartSteamTM dial. A fabric guide on the water tank offers easy reference.

FAQ

• Q : Can I use scented water with the iron?
• A: It is not recommended to use water with perfumes or scented additives as it may affect the performance of the iron.
• Q: What should I do if the plug does not fit into the outlet?
• A : If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug.

IMPORTANT SAFETY INSTRUCTIONS

When using your iron, basic safety precautions should always be followed, including the following:

• Read all instructions before using.
• Only use iron for intended use.
• To avoid the risk of electric shock, do not immerse the iron in water or other liquids.
• Always turn the iron to the MIN setting before plugging in or unplugging from the outlet. Never pull on the cord to disconnect from the electrical outlet; instead, grasp the plug and pull to disconnect.
• Do not allow the cord to touch hot surfaces. Let the iron cool completely before putting it away. Loop the cord loosely around the iron heel and clip the cord together with the provided plug clip when storing.
• Always disconnect the iron from the electric outlet before filling with or emptying water, cleaning, and when not in use.
• Do not operate the iron if it has been dropped, if there are visible signs of damage to the iron or its cord, or if it’s leaking. To avoid the risk of electric shock, do not dissemble the iron; take it to a qualified service person for examination and repair, or call the appropriate toll-free number on the cover of this manual. Incorrect reassembly can cause a risk of electric shock when the iron is used.
• Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended when plugged in or on an ironing board.
• Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn the iron upside down – there may be hot water in the reservoir. Avoid rapid movement of iron to minimize hot water spillage.
• The iron must be used and rested on a stable surface.
• When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

SPECIAL INSTRUCTIONS

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electrical shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.
Note : If the power supply cord is damaged, in order to avoid a hazard, it should be replaced by qualified personnel or in Latin America by an authorized service center.

GETTING TO KNOW YOUR COMPACT STEAM IRON

1. Soleplate
2. Spray nozzle
3. Water-fill cover
4. SmartSteam™ dial
5. Spray mist button
6. Power/auto shut-off light
7. 360˚ pivoting cord
8. Water tank
9. Heel rest
10. Integrated heel clip (not shown)
11. Plug clip (not shown)

The product may vary slightly from what is illustrated.

HOW TO USE

This product is for household use only.

GETTING STARTED

• Remove the plastic band around the power plug and all labels, tags and stickers attached to the body, cord, or soleplate of the iron.
• Remove and save literature.

FILLING THE WATER TANK

1. With the iron tilted at 45° angle, open the water-fill cover. (A)

2. Using a clean measuring cup, pour water into opening until the water reaches the “MAX” level mark on the side of the water tank. Do not overfill. Close the water-fill cover securely
   Tip: This iron is designed to use normal tap water. If your water is very hard, you can use a mixture of 50% tap water and 50% distilled water to avoid build-up. It is not recommended to use water with perfumes or scented additives.

3. Stand the iron on the heel rest.

4. To refill at any time during the ironing process, unplug the iron and follow the above procedure

USING YOUR IRON

1. Plug the iron into an outlet. The red Power/auto shut-off light will illuminate on the handle, indicating that the iron is heating.

2. Read the manufacturer’s fabric label for clothing care recommendations to help select the correct temperature setting.
   Tip : Since it takes an iron longer to cool down than heat up, organizing your clothing from Low to High temperature can cut down your ironing time.

3. Select the temperature and steam level on the iron by turning the SmartSteam™ dial until you’ve reached the desired setting. fabric guide is printed on the water tank for easy reference.

4. Allow the iron about 2 minutes to heat up to the desired temperature.
   Tip: To dry iron on low heat use SmartSteam™ settings 1–3, or for high heat simply empty the water tank and follow the normal directions. If emptying the tank, once preheated you may need to press the Burst of Steam button a few times to fully empty the water tank.

5. Iron as long as needed. Note that if the iron is left inactive, the Way Auto Shut off Safety feature will activate. Please see the Additional Features section for more details.

6. When finished ironing, turn the dial to the MIN setting and unplug from the outlet.

7. Stand the iron on its heel rest and allow it to completely cool off before storing.

SETTING GUIDE

For best results it’s recommended to use the manufacturer’s garment tags for heat and steam instructions. When in doubt, always start at the low heat setting.

ADDITIONAL FEATURES
SmartSteam™ Technology

This technology gives you control of both soleplate heat and steam level in one dial. On traditional irons the controls are separated, making it difficult to know what settings are right for each fabric. These simple controls take the guesswork out of ironing and ensure optimal results every time. (B)

Spray Mist
Press the Spray Mist button to generate a light spray of water. Spray Mist is used to dampen tough wrinkles while dry or steam ironing. This setting works at any SmartSteam™ dial setting. Do not spray silk.

way Auto Shut-Off

The iron will automatically switch to Auto Shut-Off mode and stop heating after being left inactive for 30 seconds on the soleplate or side, and 8 minutes on the heel rest. When the iron is in Auto Shut-Off mode, the red light on the handle will blink. Simply move the iron to resume ironing and the soleplate will automatically heat to a selected temperature.

CLEANING AND CARE

This product contains no user-serviceable parts. Refer to qualified service personnel.

CLEANING OUTSIDE SURFACES

1. Make sure the iron is unplugged and has completely cooled.
2. Wipe the soleplate and outer surface with a soft, damp cloth. Water and small amounts of gentle household soaps, such as dishwashing liquid, can be used. Never use heavy-duty cleaners, vinegar or abrasive scouring pads that may scratch or discolor the iron.
3. After the iron has been thoroughly dried, turn the iron back on and lightly steam over an old cloth. This will help remove any residue left in the steam holes.
4. When finished cleaning, turn the iron off and allow time to cool before storing.

STORING YOUR IRON

1. Check that the iron is on the MIN setting, unplugged and completely cool.
2. Empty the water tank by opening the water fill door and turning the iron upside down over the sink.
3. Wrap the cord loosely around the heel of the iron and secure the cord by clipping it with the integrated cord clip in the heel (C) or the plug clip (D).
4. Always store the iron vertically on its heel to prevent water from leaking from the soleplate.

IRONING TIPS AND TRICKS

• This iron is designed to use normal tap water. If your water is very hard, you can use a mixture of 50% tap water and 50% distilled water to avoid build-up. It is not recommended to use water with perfumes or scented additives.
• Since it takes an iron longer to cool down than heat up, organizing your clothing from Low to High temperature can cut down your ironing time.
• Whenever temperature settings are changed, allow the iron to stand a minute or two to allow heat up or cool down. Test the garment by pressing a small hidden area to make sure the temperature of the iron is correct.
• Whenever ironing a garment with mixed fabrics, read the garment’s tag for detailed directions or select the fabric setting for the most delicate fabric. For example, when ironing a shirt that is 65% cotton and 35% polyester, use the polyester setting.
• If you’re unsure of the fabric’s content, test a small area (on the inside seam or hem) before you proceed to iron the entire garment or cloth.
• If water dripping occurs, this means that the soleplate isn’t hot enough to create steam. Just allow the iron a minute to reheat and then resume ironing.
• To prevent iron marks on your fabric, iron the fabric inside out.
• Putting on your clothes right after ironing can actually create wrinkles. Always allow your clothing to cool for about 5 minutes after ironing to set the press.

TROUBLESHOOTING

plugging the iron into a different outlet.
Not enough steam or no steam is coming out of the iron.| The SmartSteam™ setting selected is too low. Lower heat levels are not intended to have steam.| Turn the SmartSteam™ Dial to settings 4–6 to iron with steam.
Not enough water in the water tank.| Follow the instructions under the “filling the water tank” section and fill to Max level marker.
Iron is not preheated.| If the iron isn’t fully preheated to the desired setting, the anti-drip feature will prevent the iron from creating steam. Allow the iron additional time to heat.
Discolored water is coming through the holes and staining the fabric| Residue build-up in the soleplate cavity or in the soleplate holes.| Empty the water tank after each use.
Use of descaling agents, perfumed or scented additives.| Refrain from using descaling agents, perfumed or scented additives.
Use of Starch.| Always clean your soleplate after using starch and clean your iron regularly.
Pure distilled water or softened water is being used.| Use only untreated tap water or a mix of half tap and half distilled

water and clean your iron regularly.

• © 2023 Empower Brands, LLC. All rights reserved /Todos los derechos reservados. Empower Brands, LLC, Middleton, WI 53562 07/2023Made in China.

1200 W 120 V ~ 60 Hz

Please do not throw this product away with normal household waste. If possible, take it to an official collection point in your area that recycles this type of product. Thank you for considering the environment.  domésticos. Si es possible, llévalo a un lugar oficial para

• BLACK+DECKER® and the BLACK+DECKER® logos are trademarks of The Black & Decker Corporation, used under license by Empower Brands, LLC, a subsidiary of Spectrum Brands, Inc. for its manufacturing and sale of this product. All rights reserved. All other marks are trademarks of Empower Brands, LLC.

References

• Toasters + Ovens | Coffee + Tea | Blenders + Food Prep | BLACK + DECKER
• prodprotect.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>