Baojiadi 2BE8L-S20 Magnetic Wireless Charging Instruction Manual
- May 15, 2024
- Baojiadi
Table of Contents
Baojiadi 2BE8L-S20 Magnetic Wireless Charging
Product Features
- This product has built-in multi-stage magnets with stable magnetic force .
- Accurate charging positioning to improve wireless charging efficiency.
- One time charging makes mobile phone charging more convenient.
- Zinc alloy CNC+PC+ glass panel, the product is exquisite and compact.
- All around protection. the mobile phone charging does not get hot.
- It supports up to 15W wireless fast charging and is compatible with 1 OW / 7.5w/5w
- This wireless charger is used for wireless charging in vehicles, making navigation more convenient.
specification
- Model: S20
- Input: 5v-2a / 9v-1.67 A
- Output: 15W / 1 OW / 7 .5w/5w
Instructions For Use
- Before using the charger, please confirm whether the charger has been connected to the power supply.
- Put on the mobile phone, the mobile phone shows charging, and the charger will enter the charging state.
- Mag Safe magnetic suction charging, precise positioning, and instant charging.
- Remove the mobile phone, and the product is in standby mode. If your mobile phone doesn’t support wireless charging receiver, please buy it.
- Car mounted magnetic suction charging requires a magnetic suction leather cover for more stable use.
Precautions
- Please don’t use this charger in humid environment.
- Please do not use this charger in high temperature environment.
- Please don’t put metal foreign matters (such as key, coin , etc.) on the charger to avoid heating and damage.
- Please don’t put magnetic materials (such as trial card , ID card , etc.) on the charger to avoid card invalidation.
- Don’t try to disassemble the charger by yourself, it may cause damage.
Packing list
Magnetic wireless charger (including data cable) x 1
instruction manual x 1,
Vehicle air outlet base (clamp) x 1
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide responsible protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-
located for operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- Th is device may not ca use harmful interference, and
- Th is device must accept any interference received , including interference that may cause undesired operation.
Installation and use
Easy to use with ,a few simple steps
-
Clamp the air outlet ball Snap into the back of the main body
-
Gently tighten clockwise”
-
Rotating nut adjustment The length of the steel hook
-
Choose a suitable position to fasten the steel hook
-
Tighten the nut at the ball joint To stabilize the bracket
WARRANTY CARD
Respected user:
Thank you for purchasing this product. In order 10 ensure that you get reliable after-sates service. please read the following Instructions carefully The products guaranteed by this certificate are sold by our company or designated distributors. For the products registered in this certificate , the contents of this certificate must be filled In truthfully, otherwise it will be regarded as an invalid three pack certificate, which its registered m the product Information The production batch number of the product must be consistent with the actual batch number of the guaranteed product. This certificate ,s the primary certificate of the three-guarantee service Please keep ,t properly, When the customer needs technical support services, please show this certificate, and we will provide you as required Provide high- quality professional services.
The following situations do not belong to the scope of the three guarantees:
- It is not possible to provide a valid three-guarantee certificate and a valid Invoice (except to prove that the product 1s with in the validity period or the three-gurantee) or change the three-guarantee certificate without authorization.
- The product model and production batch number on the “Three Guarantees” certificate do not match the actual product or there Is no dealers seal.
- Damage caused by failure to use. maintain, and keep in accordance with the requirements of the product instructions.
- Failures caused by accidental disasters, self-disassembly, men-made damage. or service repairs not authorized by our company.
- No factory name. factory address, production date or no product certificate.
- Damage caused by force majeure.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-
located for operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation .
