BLU-CASTLE BC-RT905 DOCSIS3.0 Residential Gateway User Manual
- May 15, 2024
- BLU-CASTLE
Table of Contents
BLU-CASTLE BC-RT905 DOCSIS3.0 Residential Gateway
Product Specifications
- Interface:
- RF Interface
- LAN
- Voice
- WiFi
- Power On/Off Switch: YES
- Input Voltage: 110-240 VAC 50/60 Hz
- Diagnostic LEDs: Power, DS, US, Online, 2.4G,5G, TEL1, TEL2
- Power Consumption: MAX 30W
Product Usage Instructions
Setup and Installation
- Connect the RF Interface to your cable source.
- Connect LAN ports to your devices using Ethernet cables.
- Connect Voice ports if required.
- Power on the device using the On/Off switch.
- Wait for the diagnostic LEDs to indicate proper functioning.
WiFi Configuration
- Access the router’s web GUI using a browser on a connected device.
- Configure WiFi settings including SSID, password, and security protocols.
- Adjust WLAN channel management and rate settings for optimal performance.
VOIP Setup
- Configure VOIP settings through the web GUI.
- Set up SIP or MGCP for voice communication.
- Enable advanced services like call waiting, caller ID, call-forwarding, etc.
Description
The Blu-Castle DOCSIS 3.0 Residential Gateway BC-RT905 integrates two analog voice lines, a 4-port Gigabit Router, and a Dual Band 802.11ac/n wireless access point into a single device. Using Intel’s multi-processor /WiFi full offloading technology, the BC-RT905 can achieve high bandwidth performance through both wired and wireless interfaces. Local web-based configuration and remote management via TR-069 can be used to manage the device. This multifunctional unit is intended to serve as the hub of the subscribers’ network, connecting all IP applications (Internet, Data, Voice, and Video) of the customer premise equipment. Furthermore, the BC-RT905 will continue to take the lead in the market of advanced home and small offices.
Key Features
- Intel PUMA6 MG
- 24*8 Channel Bonding
- DOCSIS/EuroDOCSIS 3.0
- PacketCable/EuroPacketCable 1.5
- 4 port Gigabit Ethernet
- 3×3 2.4GHz 802.11n
- 4×4 5GHz 802.11ac
- Dual Band ConCurrent up to 2300Mbps
- 2 voice ports with SIP or MGCP
- Dual Stack IPv4/IPv6 Home Router
Product Specification
DOCSIS3.0 Residential Gateway
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingmeasures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20 cm between the radiator & your body.
FAQ
Frequently Asked Questions
- Q: How do I reset the device to factory settings?
- A: To reset the device, locate the reset button on the device and hold it for at least 10 seconds until the LEDs flash. This will restore the device to its factory settings.
- Q: What should I do if I encounter WiFi connectivity issues?
- A: Try adjusting the WiFi channel settings on the router to avoid interference. You can also try rebooting the router and ensuring that the firmware is up to date.
- Q: Can I use this device with any internet service provider?
- A: The BC-RT905 should work with most internet service providers, but it’s recommended to check compatibility with your specific provider before purchasing.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>