MENGHU M17S Laptop User Manual

MENGHU M17S Laptop

Product Information

Specifications

• Model: M17S
• Screen Size: 17.3 inches
• Transmitter/Receiver: Licence-exempt
• SAR Compliance: Yes
• SAR Level: 1.125W/kg

Product Usage Instructions

Safety Information

Ensure compliance with all safety guidelines provided in the user manual to prevent any potential risks.

Power On/Off

To power on the laptop, press the power button located on the device. To turn it off, go to the Start menu and select Shutdown.

Connectivity

Connect to Wi-Fi networks or other devices by accessing the network settings in the Control Panel.

Adjusting Settings

You can adjust display settings, sound preferences, and other configurations in the Control Panel or Settings menu.

Maintenance

Keep the laptop clean by using a soft, dry cloth to wipe the screen and keyboard. Avoid using harsh chemicals.

Accessories

Quick installation of MENGHU

Dear customer
First of all, thank you for your trust in our products. In this world, we met and reached an agreement. Your trust is our most precious gift, and we are very honored and cherished!
If you are satisfied with our products, please share with your family and friends. At the same time, please pay attention to whether there are related praise gift activities on the homepage of the purchased sales platform product. We sincerely look forward to your participation and hope that you can click on all the stars in the evaluation as an encouragement to our customer service.
Your evaluation is the life of our company’s sustainable development! If you have any questions or help about our products, please contact us as soon as possible through the Amazon website, so that we have the opportunity to provide you with timely and effective help and give us praise. Thank you very much for your tolerance and support!
I wish you and your family health and happiness forever. All the staff of MENGHU look forward to seeing you again.

Parameter configuration

1. This product is suitable for use in non-tropic areas below 2,000 meters

2. Prevent this product from falling to the ground it could be strongly damaged.

3. Keep the device away from rain, moisture, direct sunlight and heat source.

4. Avoid using it in the strong magnetic and strong static environment as much as possible.

5. Once any water or other liquid splashes onto this product, close it immediately and do not use it until it dries out.

6. Do not clean this product with any detergent containing chemical elements or other liquid to avoid causing damage due to corrosion and becoming damp. If cleaning is really necessary, clean it with dry soft cloth tissue paper.

7. Handle the screen gently. To clear fingerprints or dust on the screen, use soft cloth dedicated for camera lens instead of gauze.

8. Please back up your important files at any time to avoid loss.

9. Please do not disassemble this product by yourself; otherwise you will lose the right to warranty.

10. Do not disconnect the device from power suddenly when formatting or up lo ad in g and downloading, which can lead to program errors.

11. Please use the original AC adapter for charging. Nonconforming chargers may cause harms.

12. Protect the power cord. When connect the power cord, do not step onto it or place any object on it, which may cause extrusion. Protect the connector of the power cord connected devices specially.

13.  Batteries
    The batteries in this product can not be easily replaced by users themselves. Replacement with incorrect type batteries may cause explosion.

14. While using the earphone, if the volume is excessively high it may cause hearing damage. So please adjust the volume of the player to a moderate level and balance the time of using.

15. Pictures in this manual are for demonstration purpose only and may differ from the real product.

16. Caution
    This unit contains battery. If the battery is defective, it should not be disposed of with household waste Batteries can possibly
    contain harmful substances that can harm the environment and peoples health. Please dispose of the battery commercially or at a municipal recycling plants.
    Return is free of charge and is prescribed by law. Please only dispose of empty batteries in the containers provided and tape the terminals.

Use of MENGHU laptop

Sleep, restart and shut down.

Use WIFI to connect to the Internet

Wi-fi, Bluetooth, Flight mode

cortana

System reset

Notice: The Reset progress will take around 3-5 hours, in order to finish the Reset successfully, please connect the adapter to charge the device during the whole Reset progress.

BIOS-Setting & Bootmanager

Press and hold” ESC” button of keyboard immediately after switch on the device by pressing power button. Then different options will appear. Choose option “SCU “for BIOS setting and ” Boot Manager for operating system boot option.

Battery charging

Connect power adapter to the power port of the device Connect the power adapter plug into a power outlet for charging the battery. Please only use the provided original power adapter.
During charging, the icon of battery will be ,and when charging completes, the icon will be ).
You can still use the device while charging, but this will extend the charging time. Use the device at least once a week.
Fully charge the battery regularly.
Do not leave the battery empty for a long time.

Troubleshooting

1. Can not turn on the device
   Press the power button for 5 seconds to turn on the device. If the above method doesn’t work, please charge it for 30 minutes before starting.

2. No sound from earphone
   Check if volume is set to “O”. Test if earphone is broken, if so .please change for another earphone.

3. Big noise
   Check if there is dust in the earphone or speaker. Check if the sound file is broken.

4. screen drift or unresponsive screen
   Switch off the device by a long press (approx. 30 sec.) of the power button.
   (Do not use this way to switch off the device unless it is necessary)

5. Windows key cannot active immediately
   First, make sure the Wi-Fi is connected and the Wi-Fi network is a working network. Second, make sure the time zone and system time is correct in your location.
   (Windows key active delay may happen sometimes because of the network speed or other reason if you make sure the above two points are correct and the key still cannot active. Kindly contact with our service team please. We will support you immediately)

6. How to enter desktop interface when first time starting up.
   Follow the Microsoft Windows 7 0 starting up guide step by step to enter the desktop interface.

7.  Why my device has already been registered by account name of “default user 0”
   This is a common software error may happen in Windows 70 when user starting up the device First, press the power button for 5-8 seconds to shut down the device. Do this 3 times, and then power on the device, below content will show up.

8. Why when I press the keyboard character, in the system it shows another one? This may happen because you choose the wrong language when you first time turn on the device. Below is the method to correct the language and input Choose windows home button at the left bottom side of the desktop.

9. Windows automatic update may cause some issues recently, below is the method of how to open or close the automatic update function. Click mouse right
   button(Laptop) on the windows home button at the left bottom side of the desktop. Choose ‘Task Manager” choose “More details, choose “Services”➔ choose “Open Serv ices”➔find “Windows Update” click mouse right button (Laptop) on it➔ choose “Properties”➔ find Startup type and choose the option you want. There are 4 options. Automatic (Delay Start)/ Automatic/Manual/Disabled.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help\

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

IC Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic DevelopmentCanada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC RF Radiation Exposure and SAR Statements

The 17.3inch laptop M17S has been tested for body-worn Specific Absorption Rate (SAR) compliance. The IC has established detailed SAR requirements and has established that these requirements. This model meets the
applicable government requirements for exposure to radio frequency waves. The highest reported SAR level for usage near the body (0mm) is 1.125W/kg

Frequently Asked Questions (FAQ)

Q: Is it safe to use the laptop for extended periods?

A: Yes, the laptop complies with SAR requirements and is safe for regular usage.

Q: How do I check the SAR level on the laptop?

A: The SAR level information is provided in the product specifications section of the user manual.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>