MENGHU SGINM17V2 17.3 Inch Laptop User Manual
- June 13, 2024
- MENGHU
Table of Contents
SGINM17V2 17.3 Inch Laptop
User Manual
SGINM17V2 17.3 Inch Laptop
Dear customer:
First of all, thank you for your trust in our products. In this world, we met
and reached an agreement. Your trust is Our most precious gift, and we are
very honored and cherished!
If you are satisfied with our products, please share with your family and
friends. At the same time, please pay attention to whether there are related
praise gift activities on the homepage of the purchased sales platform
product. We sincerely look forward to your participation and hope that you can
click on all the stars in the evaluation as an encouragement to our customer
service.
Your evaluation is the life of our company’s sustainable development! If you
have any questions or help about our products, please contact us as soon as
possible through the Amazon website, so that we have the opportunity to
provide you with timely and effective help and give us praise. Thank you very
much for your tolerance and support!
I wish you and your family health and happiness forever. All the staff of
MENGHU look forward to seeing you again!
—— MENGHU Brand Division
Important Notes:
Charge the battery for at least 12 hours before initial start-up.
Parameter configuration
- This product is suitable for use in non-tropic areas below 2,000 meters
- Prevent this product from falling to the ground it could be strongly damaged.
- Keep the device away from rain, moisture, direct sunlight and heat source.
- Avoid using it in the strong magnetic and strong static environment as much as possible.
- Once any water or other liquid splashes onto this product, close it immediately and do not use it until it dries out.
- Do not clean this product with any detergent containing chemical elements or other liquid to avoid causing damage due to corrosion and becoming damp. If cleaning is really necessary, clean it with dry soft cloth tissue paper.
- Handle the screen gently. To clear fingerprints or dust on the screen, use soft cloth dedicated for camera lens instead of gauze.
- Please back up your important files at any time to avoid loss.
- Please do not disassemble this product by yourself; otherwise you will lose the right to warranty.
- Do not disconnect the device from power suddenly when formatting or up lo ad ing and downloading, which can lead to program errors.
- Please use the original AC adapter for charging. Nonconforming chargers may cause harms.
- Protect the power cord. When connect the power cord, do not step onto it or place any object on it, which may cause extrusion. Protect the connector of the power cord connected devices specially.
- Batteries The batteries in this product can not be easily replaced by users themselves. Replacement with incorrect type batteries may cause explosion.
- While using the earphone, if the volume is excessively high it may cause hearing damage. So please adjust the volume of the player to a moderate level and balance the time of using.
- Pictures in this manual are for demonstration purpose only and may differ from the real product.
- Caution!
This unit contains battery. If the battery is defective, it should not be
disposed of with household Waste Batteries can possibly contain harmful
substances that can harm the environment and peoples health. Please dispose of
the battery commercially or at a municipal recycling plants.
Return is free of charge and is prescribed by law. Please only dispose of
empty batteries in the containers provided and tape the terminals. J
Accessories
Quick installation of MENGHU.
Use of MENGHU laptop.
Quickly press the power button to turn on the MENGHU Laptop.
When the MENGHU logo appears on the screen, please wait patiently for some
time and follow the system prompts to enter the
Sleep, restart and shut down.
Same experience as you use Desktop PC. Click the on the bottom taskbar, and then click the . Finally, in the pop-up menu options, you can choose hibernation, shutdown or restart.
Use WIFI to connect to the Internet
Wi-fi, Bluetooth, Flight mode
Touch to Open Setting Tablet o set up Airplane mode / Wi-FI / & Bluetooth, and this device can connect to 246 and 56 Wifi
Cortana
You can use Cortana (voice control ) to set reminders, write emails, search, and chat with friends and family on messengers.
System reset
Notice: The Reset progress will take around 3-5 hours, in order to finish the Reset successfully please connect the adapter to charge the device during the whole Reset progress.
Click the left mause button on the button in the lower left corner of the
desktop.
Select “Advanced options” → select “Windows Update” → select “Advanced
options’, select “Recovery” → select ‘Advanced startup’ → find Restart now
and click the left ‘mouse button → select the *Restart now” button in the pap-
up window;
Press Troubleshoot, below content will show up.
Press ” Reset this P to fix the software error.
BIOS-Setting & Boot manager
Press and hold ” £5C ” button of keyboard immediately after switch on the device by pressing power button. Then different options will appear. Choose option ” SCU ” for BIOS setting and * Boot Manager for operating system boot option.
Battery charging
Connect power adapter (o the power port of the device Connect the power
adapter plug into a power outlet for charging the battery. Please only use the
provided original power adapter.
During charging, the icon of battery will be and when charging completes, the
icon will be .
You can still use the device while charging, but this will extend the charging
time.
Use the device at east once a week Fully charge the battery regularly.
Do not leave the battery empty for a long time,
Troubleshooting
-
Can not turn on the device
Press the power button for 5 seconds to turn on the device. If the above method doesn’t work, please charge it for 30 minutes before starting. -
No sound from earphone
Check if volume is set to “0”. Test if earphone is broken, if so .please change for another earphone. -
Big noise
Check if there is dust in the earphone or speaker. Check if the sound file is broken. -
Screen drift or unresponsive screen Switch off the device by a long press (approx. 30 sec.) of the power button.
(Do not use this way to switch off the device unless it is necessary.) -
Windows key cannot active immediately First, make sure the Wi-Fi is connected and the Wi-Fi network is a working network. Second, make sure the time zone and system time is correct in your location. (Windows key active delay may happen sometimes because of the network speed or other reason if you make sure the above two points are correct and the key still cannot active. Kindly contact with our service team please. We will support you immediately)
-
How to enter desktop interface when first time starting up.
Follow the Microsoft Windows 10 starting up guide step by step to enter the desktop interface. -
Why my device has already been registered by account name of “default user 0” . This is common software error may happen in Windows 10 when user starting up the device First, press the power button for 5-8 seconds to shut down the device.
Do this 3 times, and then power on the device, below content will show up. -
why when I press the keyboard character, in the system it shows another one?
This may happen because you choose the wrong language when you first time turn on the device. Below is the method to correct the language and input. Choose windows home button at the left bottom side of the desktop. -
windows automatic update may cause some issues recently, below is the method of how to open or close the automatic update function. Click mouse right button(Laptop) on the windows home button at the left bottom side of the desktop.
Choose “Task Manager” choose “More details, choose “Services” choose “Open Serv ices”>find “Windows Update” click mouse right button (Laptop) on it> choose “Properties”— find Startup type and choose the option you want. There are 4 options. Automatic (Delay Start)/Automatic/Manual/Disabled.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1)This device may not cause interference.
(2)This device must accept any interference, including interference that may
cause undesired operation of the device.
IC RF Radiation Exposure and SAR Statements
The 17.3 inch laptop M17 has been tested for body-worn Specific Absorption
Rate (SAR) compliance. The FCC/IC has established detailed SAR requirements
and has established that these requirements. RF Exposure Information The radio
module has been evaluated under FCC Bulletin C95.1 and IEEE 1528 and found to
be compliant to RF Exposure from radio frequency devices. This model meets the
applicable government requirements for exposure to radio frequency waves. The
highest reported SAR level for usage near the body (0mm) is 0.861W/kg,
Simultaneous Transmission the body (0mm) is 0.987W
Distributor : L FORWARD INC.
Adress: 1908 Thomes Ave Cheyenne, WY 82001.
Manufacturer: Shenzhen NST Industry and Trade Co.,Ltd.
Adress: 3/F, Bldg 1, Hong Bang Intelligent Technology Park,No.30 Cuibao Road,
Baolong Street, Longgang District, shenzhen, Guangdong,China.
E-mail: MENGHU-tech@service.com
MENGHU Ltd.
2022 Liuard Ltd. All rights reserved.
According to copyright law, all or part of this manual may not be copied
without the written consent of Liuord.
We have tried our best to ensure that the information in this manual is
accurate.
Liuord is not responsible for typographical or typographical errors.
3o0oyue Intonational Trading GmbH
P Wolfen butteler 5tr.45 Magdeburg
Germany 39112
+49 1743636196
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>