AFRV LT-SKY01A Galaxy Light Projector User Manual

USER’S MANUAL
When in use, it can be placed upside down to project in different directions.

LT-SKY01A Galaxy Light Projector

Product Model: LT-SKYO1A
Product size: 180180110mm
LED Power Extraction: <5W
Control method: remote control
Remote control range: <5 meters (best distance)
Working temperature: -10~45 C
Applicable scene: indoor home (better in dark environment)
Material: ABS/PC
Working input: DC5V(1~3A)
Laser Wavelength: 532nm

Attention
Must read before use: Star Laser Light is not a toy product category.
This product is designed to provide you with an amazing starry sky in your home, with a combined effect between replacement laser lights and LED lights. For the most stunning and satisfying visuals, use a star laser in a dark room environment, as any light in the environment will impair the effect of the illuminating laser in the starry sky. Star laser light auto focus function, please do not try to touch or adjust the position of the lens.

Notice

1. “Caution – Use of controls, adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure.
2. “CAUTION – The use of optical instruments with this product increases eye hazard.
3. The light source of stars and nebula is strong, so don’t look directly at the light source.
4. The brightness of the star (that is, the brightness of the laser) is affected by the ambient temperature and the use time. When the ambient temperature is high or the power-on time is long, the brightness of the laser will be reduced due to the heat generated by the light source. At this time, just turn off the power to let the laser emitting device dissipate heat (the heat dissipation time usually takes more than 15 minutes), and then turn it on to restore the brightness.
5. Operate strictly in accordance with this manual, please do not disassemble the host and accessories by yourself
6. Do not immerse the star laser light in water.

Host Key Operation Instructions

Host Key Operation Instructions

1. Main switch: Short press to turn on, short press again after turning on to turn off.
2. RGB menu: every time you press the button, the light will switch colors, long press the button to turn off the light, short press the button after turning off the light to turn on the light again.
3. Star menu: Each time you press the star frequency to change one gear, the star is divided into 3 gears, 012, 0 means the star is always on, the 2nd gear has the highest frequency, and the default is 1 gear.
4. Infrared receiving area: It is used to receive the signal area of the remote control. The remote control needs to be aimed at the receiving area, and the best distance is about 3 meters.
5. MIST light menu: Short press to turn on and off the MIST light. (The main light is off in this mode)
6. Increase or decrease of light brightness : every time the brightness is pressed, the brightness changes by one level, and the cycle is like this. (Ineffective in RGB breathing mode)
7. Timing display window: When the remote control starts the timing function, this window will light up, red means 60 minutes off, blue means 120 minutes off. The machine has a built-in 8-hour shutdown.
8. MIST projection window: The mist lighting mode projects to the ceiling through this window.
9. Star projection window: The star light effect is projected to the ceiling through this window.
10. Power input port: The power input port of the host, the interface is TYPE-C, and the voltage is DC-5V.
11. Power switch : After the host is powered on, it can only be used after turning this switch to the ON position. ON means power on, OFF means power off.

Remote Control Instructions

Remote Control Instructions

1. Main switch: Short press to switch on and off, Nebula and Stars are turned on by default after booting, short press again after booting to shut down.
2. Timing switch: The timing is divided into two levels, namely 60 minutes/120 minutes. Press the remote control for the first time, the timing indicator light will be red, and enter the 60-minute timing; press the second time, the timing indicator light will be blue, and enter 120 minutes. Minute timing; in the timing state, the timing indicator is always on, press and hold to cancel the timing, and the timing indicator turns off after canceling.
3. Brightness +: There are 4 levels of brightness for the main light. The default brightness is the middle level. Each time you press it, the brightness will increase by one level.
4. Brightness-: The brightness of the main light has a total of 4 levels, the default brightness is the middle level, and each time you press it, the brightness will decrease by one level
5. Lighting switch color: every time the button is pressed, the nebula will  switch to a color, and it will return to the default color after a cycle. Long press the button to turn off the nebula, and then short press the button to turn the nebula back on
6. Light movement speed-: Nebula change speed is the motor speed, divided into 4 gears, 0123, 0 gear is static, 3 gear is the fastest, the default gear is 2 gears, and the nebula change speed is reduced by one gear every time you press it, until gear 0.
7. Light movement speed +: Each time the nebula change speed is increased by one level, until the maximum level is 3
8. Star breathing frequency: The star breathing frequency is divided into 3 gears, 012, 0 gears indicate that the stars are always on, 2 gears have the highest frequency, the default gear is 1 gear, and the star gear changes once every time you press it
9. Star switch: Short press the switch to turn on the star, short press again to turn off the star.
10. MIST light mode: short press the switch to turn on the fog light, long press the switch to adjust the frequency, the frequency is divided into three levels 0-1-2, level 0 means constant light, level 2 is the highest frequency, the default is level 1, every long press The frequency changes one level at a time, and so on. (The main light is off in this mode)
11. Star Brightness-: The star brightness adjustment is limited to the constant light mode. When you press this button, it will automatically switch to the constant light mode and reduce the brightness by one level.
12. Star Brightness+: The star brightness adjustment is only limited to the constant light mode. When the brightness becomes dark, press this button once, and the brightness will increase by one level until the brightest level.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>