ESX W447 Can Bus Adapter Set Installation Guide
- May 15, 2024
- ESX
Table of Contents
ESX W447 Can Bus Adapter Set
Product Information
Specifications
- Product Name: CAN-BUS Adapter Set for Mercedes-Benz Vito W447
- Model: VN A – CAN-MV-ISO
- Compatibility: Mercedes-Benz Vito W447 with ISO connection
Product Usage Instructions
ISO Plug Assignment on Vehicle Side
Before connecting the CAN-BUS adapter set, ensure the correct ISO plug assignment on the vehicle side.
Connection Description
- Plug the CAN bus decoder into the white cable connector (16-pin).
- Connect to the vehicle’s ISO connection in the radio slot.
- Option 1:
- Connect connector 3 (CAN-L/CAN-H) to 5 if the two green cables on the vehicle’s ISO connector are connected to C1.
- Option 2:
- Connect connector 3 (CAN-L/CAN-H) to 6 if the two green cables on the vehicle’s ISO connector are connected to A.
- Plug the white cable connector (8-pin) into the ESX Smart\ Naviceiver into port A.
- Insert the black cable connector (16-pin) on the ESX Smart Naviceiver into port B.
Design
The CAN-BUS adapter set features a user-friendly design for easy installation and compatibility with Mercedes-Benz Vito W447 models.
FAQ
Q: How do I know which option to choose for connecting the ESX-W447-Can- Bus-Adapter-Set-
A: Refer to the vehicle’s ISO connector and choose Option 1 if the green cables are connected to C1, or Option 2 if they are connected to A.
VNA-CAN-MV-ISO
CAN-BUS ADAPTER-SET FOR MERCEDES-BENZ VITO W447 WITH ISO CONNECTION
IMPORTANT NOTES
This guide is an aid for the professional installation of the device. Please note the following notes before installation:
- Always handle all parts of the device and the components of your vehicle with care.
- Under all circumstances observe the regulations of the vehicle manufacturer and do not make any changes to the vehicle which could impair driving safety.
- For safety reasons, disconnect the vehicle battery’s ground connection before installa-tion.
- Please always pay attention to the correct polarity of the connections.
- Please do not modify any harnesses or connections of the device or the vehicle as this may affect the warranty.
- Make sure that no cables are squashed or cause a short circuit.
- Do not lay cables in front of the airbags, e.g. in the dashboard or in a way that affects their function.
COMPATIBILITY
- Only compatible in conjunction with ESX Smart Naviceivers of the i40/i45 series.
- Only compatible with Mercedes-Benz Vito W447 with ISO connection
ISO PLUG ASSIGNMENT ON VEHICLE SIDE
CONNECTION DESCRIPTION
- Plug the CAN bus decoder into the white cable connector (16-pin)
- Connect to the vehicle‘s ISO connection in the radio slot
- Connect connector 3 (CAN-L/CAN-H) to 5 if the two green cables on the vehicle‘s ISO connector are connected to C1 (see left)
- Connect connector 3 (CAN-L/CAN-H) to 6 if the two green cables on the vehicle‘s ISO connector are connected to A (see left)
- Without use
- See 3a
- See 3b
- Plug the white cable connector (8-pin) into the ESX Smart Naviceiver into port A (see below)
- Insert the black cable connector (16-pin) on the ESX Smart Naviceiver into port B (see below)
ESX Car Media Systems · Audio Design GmbH
Am Breilingsweg 3 · D-76709 Kronau/Germany
Tel. +49 7253 – 9465-0 · Fax +49 7253 – 946510
www.esxnavi.de –
www.audiodesign.de
© Alle Rechte vorbehalten. Technische Änderungen und Fehler vorbehalten.