OZZ 88103 black LED Driving Light Instruction Manual
- May 15, 2024
- OZZ
Table of Contents
OZZ 88103 black LED Driving Light
Before installation
- Check the local laws and regulations and the region your vehicle may travel to for Auxiliary light before installation, and ensure they are compliant.
- Read all installation instructions.
- Make sure the dimensions and weight of the lamps and device are matched to your vehicle see Figure 01.
- Slight moisture inside may exist, it will be removed from the vent after 2-4 times.
- Working Voltage: 12-35V.
Mounting
- Determine the installation location, use an 11 mm drill with 1 or 3 holes, and lock nut tightening.
- Use the stay bar if it is needed for stabilization, see Figure 02.
Wiring Connections & Functions
- Wiring connections
- Black: Ground,-
- Red: Driving light for Off-road
- Blue: Driving Light on the road (Emark)
- White: White position light
- Yellow: Amber position light
- Wiring Harness, 40A relay, 30A fuse
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>