hama 00176642 Smart WLAN LED Lamp Instruction Manual

hama 00176642 Smart WLAN LED Lamp

Introduction

Thank you for choosing a Hama product. Take your time and read the following instructions and information completely. Please keep these operating instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of warning symbols and notes

Risk of electric shock

This symbol indicates a risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.

Warning

This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note

This symbol is used to indicate additional information or important notes.

Explanation of symbols used on the product label

• Non-dimmable. The lamp is not suitable for use with a conventional dimmer.
• Only use in a dry environment.

Packaging contents

• 1x smart LED BULB
• 1x quick guide
• 1x warning and safety instructions

Safety instructions

risk of electric shock

• Do not open the product and do not operate it if it is damaged, if smoke, a strange smell or loud noises are coming from it. Immediately contact your dealer or our service department (see “Service and Support”).

Warning

• Please note that lights (even LEDs) can generate heat and may become hot. Always let the light cool off for a few minutes before touching it or changing it.
• The device may only be operated on a 230 V 50 Hz AC voltage network. Work on the 230 V network must only be carried out by an electrician certified in your country. The applicable accident prevention regulations must be adhered to.
• If you will not be using the product for a prolonged period, disconnect it from mains power.
• The product is intended for private, non-commercial use only.
• Use the product only for the intended purpose.
• The product is intended only for use inside buildings.
• Only use the article under moderate climatic conditions.
• As with all electrical products, this device should be kept out of the reach of children.
• Do not operate the product outside the power limits given in the specifications.
• Do not use the product in areas in which electronic products are not permitted.
• Do not drop the product and do not expose it to any major shocks.
• Do not modify the product in any way. Doing so voids the warranty.
• Dispose of packaging material immediately in accordance with the locally applicable regulations.
• Do not use the product in a damp environment and avoid splashing water.
• The product must only be operated on a supply network as described on the type plate.
• Not suitable for operation with dimmers, electrical switches, photo cells, time switches or twilight switches.
• Whenever changing a light, always ensure that the light or fitting in question is voltage-free. Switch it off and/or pull the mains plug.

INSTALLING THE HAMA SMART HOME APP

To use all the functions of the device, you need a smartphone/tablet and the Hama Smart Home app.

Note

• The following operating systems are supported:
• iOS 16.3 or later
• Android 6.0 or later
• Download the Hama Smart Home app from the App Store (iOS) or from Google Play (Android) to your smartphone/tablet.
• To install the app, follow the instructions on your smartphone/tablet.
• Open the app on your smartphone/tablet.

Note

• While setting up the app, you will be asked whether the app has permission to access the functions of your smartphone/tablet. Say yes to these prompts for the full functionality of the device.
• Register to create a new account. Alternatively, log in with the access data of your existing account.
• Follow the instructions for setting up the app until you can add a new device.

Note

• A detailed description of the Hama Smart Home app and all of its functions can be found in our app guide at: www.hama.com  → article number → Downloads  →App operating instructions

Note

• Ensure that you are using the latest version of the Hama Smart Home app.

Integrating devices into the Hama Smart Home

• Download the Hama Smart Home app from the Apple App Store or Google Play.
• Open the Hama Smart Home app
• The first time you use the app, you need to register and create a new account. If you already have an account, log in with your access details
• Screw the smart lamp into the appropriate fitting.
• The smart LED lamp starts to flash quickly. If it does not, switch it ON and OFF quickly 3 times using the light switch.
• Open the app and sign in.
• Press the + in the top right-hand corner to add a new device.
• Choose Lamps from the list.
• Next enter your WiFi password and confirm with “Next”.
• Now confirm that the lamp is flashing quickly by ticking “Next step” and clicking on “Next”.
• Your lamp is now connected.
• Once the connection is successful, the lamp stops flashing quickly and the app confirms that your lamp is connected. You can now assign it a different name if you wish.
• Click Finish to end the process.
• You can now control the lamp.

Note

A detailed description of the

Hama Smart Home app
and its full scope of functions can be found in our App Guide at:

www.hama.com  →Article Number →Downloads →App Operating Instructions

Connecting via a third-party app

Thanks to the Matter wireless standard, you can control our item in all compatible third-party apps in addition to our app. Please note, however, that the full range of functions is only available to you when using the Hama Smart Home app.

Share after initial integration in Hama Smart Home App:
If you have already set up the item in the Hama Smart Home app, but want to share it for control in the app of a third-party provider, this is possible via the following steps: Open the item and navigate to the item settings using the (pencil) symbol.

Then generate a customized QR code and numerical code via the point (share via Matter).

Now follow the steps in your chosen Matter-enabled app to set up the item using the generated number or QR code.

Initial connection via a third-party app
You can also use our items without first connecting them to the Hama Smart Home app. Please follow the steps below:

• Open the Matter-compatible app you have selected and start device connection.
• Press and hold the button on the socket for approx. 5 seconds until the LED starts to flash.
• Scan the QR code on the side of the socket with the corresponding app.

Note

• Please ensure that the app you have selected supports the Matter standard.
• Find out about further requirements set out by the provider and follow these as necessary.

Setting options

The following settings can be made in the app:

For extended usage options, scenarios can be created in the app. (See Section 8 and App Guide)

Extended usage options with scenarios

Utilisation by scenes
Scenarios and automated sequences that can be created in the app allow various combination options and usage options for these products, depending on the SmartHome products in your home. Programming is always via the app (see Section 4 of the App Guide) and will be offered / suggested to you on an individual basis.

Standard usage option

Control via voice assistants
The following voice commands are supported:

Switch on / off

• “Alexa / OK Google, switch the light on”

Control brightness / colour

• “Alexa / OK Google, make the light brighter”
• “Alexa / OK Google, switch the light to red”

Technical data

• Luminous flux
  • 806lm (00176640)
  • 470lm (00176641)
  • 420lm (00176642)
• Light colour
  • RGB, 2700K – 6500K
• Input voltage
  • 220-240V AC
• Frequency band
  • 2.4 GHz
• Maximum radio-frequency power transmitted
  • < 100 mW

Care and maintenance

Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use. Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning products. Ensure that no water is able to enter the product.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or failure to observe the use instructions and/or safety notes.

Declaration of conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00176640, 00176641, 00176642] complies with Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at the following Internet address: https://de.hama.com 00176640,00176641,00176642 Downloads

To limit exposure to electromagnetic fields
This device is intended for use at a distance of at least 20 cm from the body of the user or persons nearby. This device must not be worn or carried on the body.

Service & Support

• www.hama.com
• +49 9091 502-0

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Hama GmbH & Co KG is under license. Other trademarks and trade names are those of their respective owners.All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

References

• hama.com
• Offizieller Hama Onlineshop | Hama DE
• Startseite hama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>