Selfiestick P185 Aluminum Alloy Selfie Stick Instructions
- May 15, 2024
- Selfiestick
Table of Contents
Selfiestick P185 Aluminum Alloy Selfie Stick
Product Information
Specifications:
- Compliance: FCC Part 15
- Radiation Exposure Limits: FCC approved
- Minimum Distance: 0cm between radiator and body
Product Usage Instructions
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
Compliance:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. It should be installed and operated with a minimum
distance of 0cm between the radiator and your body.
FAQ:
- Q: Can I modify the device on my own?
A: No, any changes or modifications not approved by the manufacturer can void your authority to operate the equipment.
OVERVIEW
QUICK START GUIDE
Remove The Self Timer
Slide the remote control up and out.
Rechargeable battery
Type-c charging. No need for direct chargingReplace the battery. The mobile
phone charging treasure can be charged.
Clip can rotation
Flip freely and shoot horizontally and vertically to take photos from
multiple.
How to open the quadruped
Open the handle outward to change to quadruped mode.
Stable platform
There is no need to be careful in shooting. The picture is very stable and
clear.
360 ° PTZ panorama
Smooth and smooth. Take a panoramic picture with ease.
Quadruped mode
When changing the selfie stick to quadruped mode, pay attention to pulling out
the last section of the stick and adjusting it until the quadruped is stable.
Phone volume key photography settings
HOW TO USE
- Startup: press and hold the camera button for 3 seconds to start the machine, and the indicator flashes to enter the search state.
- Bluetooth connection: open the mobile phone Bluetooth search “VIP” and click the connection. After the connection is successful, the indicator light goes out.
- Photographing: when the remote control is connected with the mobile phone, click the photographing button, the indicator flashes and takes pictures.
- Shutdown without connection: when the remote control is in the state of no connection and no operation, it will automatically shut down for about 5 minutes.
- Connected shutdown: when the remote control is connected with the mobile phone, it will enter the sleep state without operation for about 10 minutes, and then automatically shut down without operation for about 10 minutes.
- Sleep: after entering the sleep state, press the photo key to connect the mobile phone.
- Shutdown: in the power on and sleep state, long press the photo key for 3 seconds, the indicator ashes off and shuts down.
- Back connection function: the remote control has memory connection function. When the mobile phone Bluetooth is tumed on, the remote control will automatically connect the matched mobile phone.
Product parameters
- Width of holding mobile phone: 65-90mm
- Supported mobile phone size: 4.7-7 inches
Remote control parameters
- Battery model: 401020 polymer (rechargeable battery) Figure 2
- Charging condition: 5vla
- Battery capacity: 55mAh
- Charging current: About 50mA
- Full charge time: about 30-60 minutes
- Bluetooth version: 5.2
- Bluetooth Name: VIP
Solution to the case of failure of remote control to connect to mobile phone
- Turn on the Bluetooth of the mobile phone and clean some paired equipment.
- Turn off and restart the phone.
- Turn off and restart the Bluetooth remote control.
- Turn on the Bluetooth connection again.
- Turn on the mobile phone Bluetooth, turn on the remote control, and search the mobile phone interface when you get the Vir, click Connect, and the interface displays “Connecting” When “connect / pair, press the remote control button continuously and quickly, that isit can be connected normally (Excitation is only required for the Prst connection live, automatic connection in the future, normal use).
For Android phones, press the remote control to add soundsolution to the problem of quantity / focus adjustment and / or no response.
- Open the camera to enter the photographing intertace.
- Swipe left or pnd the camera settings.
- Click the volume key function.
- Set the volume key function to shutter (do not select zoom or zoom Focus).
- The setting path of individual mobile camera is different, please Pnd it yourself.
This remote control only supports the video support the video recording function of dive aps not
- Operation method:
1. Connect the Bluetooth remote control to the mobile phone
2. Enter the camera on the mobile phone or download other camera App software
3. Switch to video interface
4. Click the remote control button to record the video
5. Click the button again to end the video recording
6. Usage status: the blue light ashes, turns off after connecting the mobile phone, click to take pictures, and Bashes.
7. Charging state: the red light is on for a long time, fully charged and off.
- Operating mode:
1. Remote control, effective distance 10m
2. Tripod mode
3. Handheld mode
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0-cm between the radiator and your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>