EET Group HM-MT402H HDMI 4X2 Matrix Switcher with Audio Extraction Installation Guide
- June 13, 2024
- EET Group
Table of Contents
EET Group HM-MT402H HDMI 4X2 Matrix Switcher with Audio Extraction
INTRODUCTION
HM-MT402H is a true 4K60 4:4:4 4×2 HDMI matrix switch. Supporting HDMI 2.0, HDCP 2.2, HDR and up to 18 Gbps bandwidth. This switch allows any source (Blu- ray, UHD Blu-ray, satellite receiver, game consoles, PCs, etc…) to be shown on any of the connected displays.
Remote Control
-
Power the ON/OFF button.
HDMI Input Source Selector: Select an input source. Audio Output control buttons. -
ARC: Enable or disable the Audio Return Channel.
SPDIF: Enable or disable Optical Digital Audio output. 2.0: Sets audio output mode to 2.0 channel. -
5.1: Sets audio output mode to 5.1 channel.
-
PASS: Use the AUDIO EDID from the Display device.
CONNECTION DIAGRAM
How to Connect
- Use an HDMI cable to connect an HD source to the HDMI Input Port.
- Use an HDMI cable to connect an HD display to the HDMI Output Port.
- For an audio connection, choose one from the following options.
- a. To use HDMI pass-through, use the HDMI cable from step 2 to connect the audio receiver to the HDMI Output Port. Your audio receiver will have to output a video signal to your HD display.
- b. To use Toslink, use a Toslink cable to connect to audio equipment. (Note: Toslink does not support Dolby Digital Plus please change the input source’s audio output to a different setting, if needed.)
- c. To use R/L, use a R/L cable to connect stereo audio equipment.
- Connect the power adapter.
Note: If using a Toslink cable, please make sure the rubber protective tip cover has already been removed from both ends before connecting them to devices.
FEATURES
- Input: HDMI x 4.
- Output: HDMI x 2, Toslink/SPDIF x 1, Stereo RCA x 1.
- Supports Ultra HD 4Kx2K@60Hz.
- Supports 3D.
- Supports Standard Audio, DSD Audio, and HD(HBR) Audio.
- Supports HDMI2.0, HDCP2.2, HDR Signal format
- Supports 6.0Gbps TMDS/600MHz pixel clock rate per channel, maximum total TMDS through outputs 18Gbps.
- Supports uncompressed audio such as LPCM.
- Supports compressed audio such as DTS Digital, Dolby Digital, DTS-HD, and Dolby TrueHD.
- Supports up to 7.1CH digital surround on HDMI output.
- Supports up to 5.1CH digital surround on Toslink output.
- Supports up to 2.0 channel analog stereo on Stereo output.
- Support the ARC (Audio Return Channel).
PRODUCT OVERVIEW
- Power LED
- Infrared for Remote Control
- Audio Return Channel(ARC) LED Indicator
- Optical Digital Audio Output LED Indicator
- HDMI Pass-through/2.0CH/5.1CH Audio Channel LED Indicators
- Audio mode selection Button
- HDMI Input LED Indicators
- Input Port Selection Button
- Service (Manufacturer only)
- HDMI Input Ports
- HDMI Output Port
- Optical Digital Audio Output Port
- L/R Analog Stereo Audio Output Port
- Power Input Port
SPECIFICATIONS
- 1x Main unit
- 1x Remote Control
- 1x User Manual
- 1x Power adapter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>