V-TAC VT-61106 Series LED Panel Premium Light Instruction Manual
- May 15, 2024
- V TAC
Table of Contents
V-TAC VT-61106 Series LED Panel Premium Light
Specifications
- Model: VT-61106
- SKU: 6982
- Watts: 6W
- Direct Connect Voltage: DC: 12-18V
- Beam Angle:
- CRI:
- Operation Temperature:
- Body Type:
- Dimension:
- Cut Out Size:
Product Usage Instructions
Introduction & Warranty:
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu. For more product ranges, and inquiries, please contact our distributor or nearest dealers. V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
MULTI-LANGUAGE MANUAL QR CODE: Please scan the QR code to access the manual in multiple languages.
Warning:
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
- For Indoor Use only.
Installation Diagram:
Luminaires not suitable for covering with thermally insulating material. Caution, risk of electric shock.
- Cut a hole as per the cutout size provided.
- Connect the Live and Neutral wires.
- Hold the two clips back against the panel light and push it into the hole. Allow the springs to pull the light up to the ceiling.
- Switch ON the power and test.
FAQ
- Q: Can I replace the light source in this luminaire?
- A: No, the light source of this luminaire is not replaceable. When it reaches its end of life, the whole luminaire should be replaced.
- Q: What should I do if I have a query or issue with the product?
- A: Please reach out to us at support@v-tac.eu for any queries or issues with the product.
TECHNICAL DATA
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu For More product ranges, inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
MULTI-LANGUAGE MANUAL QR CODE Please scan the QR code to access the manual in multiple languages.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- For Indoor Use only
This marking indicates that this product should not be disposed of with other household wastes
INSTALLATION DIAGRAM
- Cut a hole as per the cutout size provided.
- Connect the Live and Neutral wires.
- Hold the two clips back against the panel light and push it into the hole. Allow the springs to pull the light up to the ceiling.
- Switch ON the power and test.
Luminaires are not suitable for covering with thermally insulating material.
Caution, risk of electric shock