V-TAC VT-767-7 LED Solar Flood Light Instruction Manual

V-TAC VT-767-7 LED Solar Flood Light

Specifications

• Model: VT-767-7
• SKU: 8278, 8279
• Lumens: 850 Lm
• Power: 8 W
• Solar Panel: 4.4W, DC 5.5V, Mono with Tempered glass
• Battery: 18650 Li-ion, 3.7V, 4000mAh, 14.8 Wh (Repeatable)
• Charging Time: 12-15 Hours
• Working Time: Maximum 24 Hours
• Color Temperature: 4000K
• Lamp Dimension: 232×220.6×121.4 mm
• Body Type: ABS+PC, Anti UV
• Installation Height: 2-4 M

Product Usage Instructions

Installation Instructions

1. The recommended installation height is 2-4 meters.
2. Use the measure card to mark holing positions and drill 3 holes of 6mm diameter.
3. Install 3 expansion plugs into the holes.
4. Install 3 screws in the expansion plugs, allowing them to protrude slightly.
5. Align the lower notch on the back of the light with the lower screw and align the holes at the top of the light with the upper screws to fix the light securely.
6. Press the button on the back of the light to turn on the light and select the desired working mode.

Two Optional Working Modes

Mode A: Sensor Mode

Mode B: Keep Lighting Mode
Press the button a second time, and the back light flashes twice to activate Keep Lighting Mode.

Mode C: Off
Press the button a third time to turn off the lamp.

Battery Replacement

1. Loosen the screws and open the battery cover.
2. Remove the old battery, change it with a new one, and connect the positive and negative electrodes correctly. (2PCS* Battery 18650, 3.7V, 2000mAh, 7.4Wh)
3. Install back the cover and lock the screws.

FAQ

Can I replace the light source of the luminaire?
No, when the light source reaches its end of life, the entire luminaire should be replaced as it is not replaceable.

How do I access the manual in multiple languages?
You can scan the provided QR code to access the manual in multiple languages.

What should I do in case of any query or issue with the product?
Please reach out to support@v-tac.eu for any queries or issues with the product.

TECHNICAL DATA

• MODEL VT-767-7
• SKU 8278, 8279
• LUMENS 850 Lm
• POWER   8 W
• SOLAR PANEL 4.4W, DC 5.5V, Mono with Tempered glass
• BATTERY 18650 Li-ion, 3.7V, 4000mAh, 14.8 Wh (Repeatable)
• CHARGING TIME 12-15 Hours
• WORKING TIME Maximum 24 Hours
• WORKING MODE 2 Optional working modes
• LED TYPE  SMD 2835×104 Pcs (Front 54 Pcs+Back 2 Pcs)
• DETECTION ANGLE     90°
• SENSOR RANGE 2-6 M
• COLOR TEMPERATURE   4000K
• LAMP DIMENSION 232×220.6×121.4 mm
• BODY TYPE ABS+PC, Anti UV
• INSTALLATION HEIGHT   2-4 M

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.

WARNING

1. Please make sure to turn off the power before starting the installation.
2. Installation should be done by certified electrician.
3. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

This marking indicates that this product should not be disposed ofwith other household wastes.

INSTALLATION INSTRUCTIONS

The recommended installation height is 2-4 meters.

1. Please use measure card to mark holing positions and drill 3 holes of $6mm.
2. Install 3 expansion plugs into the holes.
3. Install 3 screws in the expansion plugs, allow the screws to protrude slightly.
4. Align the lower notch on the back of the light with the lower screw and align the holes at the top of the light with the upper screws to fix the light well.
5. Press the button on the back of the light to turn on the light and select desired working mode.

PACKAGING CONTENT

TWO OPTIONAL WORKING MODES

MODE A: SENSOR MODE

Press the button 1st time, the back light flashes once, it’s Sensor Mode:

• When battery power is greater than 30%:
  Lamp automatically lights up at night and turns to full brightness when motion is detected within the range of ≤6mtrs, then dims to lower brightness(front light and back light both on) after 20 seconds of no motion.

• When battery power is less than 30%:
  Lamp automatically lights up at night and turns to full brightness when motion is detected within the range of ≤6mtrs, then dims to lower brightness(front light off, only back light on) after 20 seconds of no motion.

MODE B: KEEP LIGHTING MODE

Press the button 2nd time, the back light flashes twice, it’s Keep Lighting Mode:

Lamp automatically lights up at dusk and remains 50% brightness.
After 5 hours or when the battery power is less than 30%, it turns to energy saving mode,which is lamp automatically turns to 50% brightness when motion is detected within the range of ≤6mtrs, then dims to lower brightness(front light off, only back light on) after 20 seconds of no motion.

MODE C: OFF
Press the button 3rd time, lamp turns off.

BATTERY REPLACEMENT

1. Loosen the screws, open battery cover.
2. Remove old battery, change new battery and connect positive and negative electrode correctly. ( 2PCS* Battery 18650, 3.7V, 2000mAh, 7.4Wh)
3. Then install back the cover, lock the screws.

MAINTENANCE & WARNING

• Do not use solvents, petrol, etc. Otherwise the light will be damaged.
• Clean the light with a dry, lint-free cloth.
• Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee flawless function of the product.
• Especially during the winter, keep the product free from snow and ice.
• Confirm installation direction is correct (solar panel should be at top)
• Confirm no objects blocking the solar panel to receive sunlight
• Keep away from the fire.
• Don’t immerse in the water

References

• tac.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>