Circadiance Full Face Mask Sleep Weaver Fitting User Guide
- May 15, 2024
- Circadiance
Table of Contents
Circadiance Full Face Mask Sleep Weaver Fitting
Product Information
Specifications
- Type: SleepWeaver Full Face Mask
- Size Options: Available in various sizes
- Material: Soft fabric material
- Recommended Usage: For individuals with sleep apnea
Product Usage Instructions
Determining Mask Size
To determine the correct size of your SleepWeaver full face mask, follow
these steps:
- Measure the width at the bottom of your nose, edge to edge. Enter the width (y) in inches (round to closest quarter).
- Measure from the bridge of your nose to the center (dimple) of your chin. Enter the length (x) in inches (round to closest quarter).
Note: It is recommended to have a friend assist you for accurate measurements. Avoid using flexible measuring devices like sewing measuring tapes or strings.
Sizing Recommendation
For full face masks, it is advised to take two measurements of your face
and choose the smaller measurement for sizing purposes.
FAQ
-
How do I clean my SleepWeaver Full Face Mask?
To clean your mask, gently hand wash it using a mild soap and warm water. Rinse thoroughly and allow it to air dry completely before reusing. -
Can I adjust the straps of the mask?
Yes, the straps of the SleepWeaver Full Face Mask are adjustable for a comfortable and secure fit.
Facial Measurements for Full Face Masks (ruler needed – see fig. 1)
- To determine your SleepWeaver full face mask size, measure the width at the bottom of your nose, edge to edge. Enter the width (y) in inches (round to closest quarter): ___in.
- Next, measure from the bridge of your nose (usually just below your eye line) to the center (i.e., dimple) of your chin. Enter the length (x) in inches (round to closest quarter):__in.
NOTE: It may be helpful to have a friend assist you. For accurate results of the face, do not use a flexible measuring device such as a sewing measuring tape or a string.
Anew
For full face masks, we recommend taking two measurements of your face and using the smaller of the two for sizing.
- First measure underneath your nostrils. If you measure 1 inch, try the Small Anew. If you measure 1½ inches, try the Regular Anew. If you measure 1½ inches or more, try the Large Anew.
- The second measurement is to measure vertically from the bridge of your noseto the middle of your chin. If you measure 3¼ to 3½ inches, try the Small Anew. If you measure 3½ to 3 ¾ inches, try the Regular Anew. If you measure 3 ¾ inches or more, try the Large Anew.
Read User Manual Online (PDF format)
Loading......