nustone BERNARD-HEATER Bernard Bioethanol Fireplace Instruction Manual
- May 15, 2024
- nustone
Table of Contents
nustone BERNARD-HEATER Bernard Bioethanol Fireplace
Product Information
Specifications
- Fuel Capacity: 2.5L
- Fuel Options: Edible alcohol, bioethanol, medical alcohol
Product Usage Instructions-
Installation
- Install the product on a stone, steel, or brick masonry surface.
- Ensure a 5-10mm gap around the fireplace box and reserved openings.
- Use high-temperature, heat-resistant materials for the installation surface.
- Avoid flammable and heat-resistant decorative materials within 50-80cm around and above the fireplace.
Fuel Procurement and Usage
- Purchase 95% pure edible ethanol for fuel.
- Do not use industrial ethanol, methanol, or other liquids.
- Add fuel following the provided method, ensuring it reaches 80% of the combustion tank height.
Ignition
- Use a long handle igniter to ignite the ethanol in the combustion tank.
- Extinguish the fire using the top cover when not in use.
Safety Precautions
- Maintain a safe distance of 30-50cm during combustion.
- Keep children away from the fireplace.
- Use non-flammable materials for the installation platform.
- Add fuel only when the fireplace surface is cool.
- Keep a fire extinguisher close by and avoid using in strong winds.
- Ensure the outdoor environment is free from corrosive substances.
Outdoor Use
Avoid exposure to direct sunlight or rain without rainproof facilities. Use a cover when not in use to prevent rainwater entry.
FAQ:
- Q: What type of fuel should I use for the Bernard BioethanolFireplace?
- A : Please use 95% pure edible ethanol as the fuel for the fireplace. Avoid industrial ethanol, methanol, or other liquids.
- Q : How should I extinguish the fire in the fireplace?
- A: Lift the fire extinguishing cover with the handle to cover the burning notch, allowing the flame to naturally extinguish.
Product Instruction
Instructions for Ethanol Fireplace Use
When preparing to use this product, please read this instruction manual
carefully and follow the relevant operating steps for installation and use.
Failure to install and use according to the manual’s requirements may result
in unexpected dangers. Please keep this manual for future reference and
consultation. Disassembling or damaging internal or external components
without following the instructions or using alcohol fireplace products
contrary to the operating requirements will result in the user bearing the
safety responsibility
Installation
Installation and Usage Diagram
When installing, provide a 5-10mm gap around the fireplace box and reserve
openings. The installation surface must be made of high-temperature, heat-
resistant, fire-resistant, flame-retardant, and heat-resistant materials.
Avoid flammable and heat-resistant decorative materials within 50-80cm around
and above the fireplace installation hole.
Manual Fireplace Reference Diagram
- Install the product on a stone, steel, or brick masonry surface.
- The reserved hole size (D3) should be greater than the fireplace box diameter (Dd1) by about 10mm and greater in depth (H2).
- The fireplace panel size (Dd2) should fit the opening surface, covering surrounding holes.
- Use S1 to remove the G1 fire extinguishing cover and add edible ethanol fuel.
- Ignite the fuel using a long-handle igniter. When not in use, use S1 to lift the G1 cover and seal the fire opening.
Fuel Procurement for Fireplaces
Please purchase “95% pure edible ethanol” locally or online as the fuel for fireplaces. Industrial ethanol, methanol, and other liquids cannot be used! *Fuel capacity – 2.5L
Fuel options : edible alcohol, bioethanol, medical alcohol. Add fuel following the provided method, ensuring it reaches 80% of the combustion tank height to prevent overflow.
Usage Method for Ignition
Use a long handle igniter to ignite the ethanol in the combustion tank. If not
used entirely, extinguish the fire using the top cover.
Halfway Extinguishing:
Lift the fire extinguishing cover (S1) with the handle and cover the burning
notch, allowing the flame to naturally extinguish.
Outdoor Use
Avoid exposure to direct sunlight or rain without rainproof facilities. Use a
cover when not in use to prevent rainwater entry.
Safety Precautions
- Maintain a safe distance of 30-50cm during combustion.
- Keep children away from the fireplace.
- Use non-flammable materials for the installation platform.
- Add fuel only when the fireplace surface temperature is below 40°C.
- Keep a fire extinguisher close by and avoid using in strong winds.
- Ensure the outdoor environment is free from corrosive substances.
Inspect the product upon receipt for missing quantities, damaged products, or damaged outer boxes. Sign for the goods accurately to ensure the condition of the delivered goods is intact and accurate. Provide timely feedback for any issues.
DIMENSIONS
CONTACT
- @nustone_uk
- 01206 700 599
- www.nustone.co.uk