BOJUE DY-1620-1L 52 Inch Ceiling Fans with Lights and Remote Control Instruction Manual
- May 15, 2024
- BOJUE
Table of Contents
Ceiling Fan
Installation Instruction
SAFETY INFORMATION
Please read all safety information and instructions before installing the
ceiling fan and save this manual for future reference.
**** WARNING
- Before connecting the power supply, make sure that the power supply used matches the specifications of the ceiling fan.
- All wiring must comply with national and local electrical codes ANSI/NFPAT0. If you are not familiar with wiring, please use a qualified electrician.
- To reduce the risk of fire or electric shock, turn off the power to the fuse box or circuit breaker before installing the fan.
- To reduc the risk of personal injury, attach the fan directly to the building’s support structure and ensure that it can accept at least 35 pounds (15.9 kg).
- Make sure that the installation location allows the fan blades to rotate without obstacles.
Installation Location 
- Do not install the fan with wet hands.
- Do not insert foreign objects between the rotating fan blades.
- Do not bend the fan blades when installing or cleaning the fan.
- Do not disassemble or modify this product or use non-original parts without permission.
- Keep children away from your working area.
- Properly dispose of the fan’s packaging material.
- Make sure the ceiling fan is firmly secure to the ceiling. Double check all connections before you restore power.
- Tum off the fan and wait for the blades to stop completely before performing any maintenance or cleaning.
PRE-INSTALLATION
Tools Required (Not Included)
Parts List
INSTALLATION INSTRUCTION
Step 1: Mounting Bracket Installation
1. Drill holes with electric dril (8 mm).
2. Use expansion screws to fix the mounting bracket to the ceiling.
Fasten the mounting
bracket to the ceiling with self-tapping screws.
Step 2: Fan Blade Installation 1 . Clamp the fan blade under the triangular
cover and fix the fan blade to the motor with screws and gaskets.
Hoks:
- The fan blade needs to be aligned with the “center” position of the screw hole group.
- Do not lock the screws when installing the blades and then tighten all the screws after all the fan blades are installed
2. Loosen the screws of the upper triangular cover of the motor with an
electric drill.
Step 3: Installation of LED Board 3. Thread the motor line through the
LED board, then align the LED board with the triangular cover on the motor and
put it on.
4. Install the screws on the triangular cover into the corresponding holes.
5. Connect the motor line and the lamp panel line.
Step 4: Downrod Installation 1. Select a suitable downrod. (3 lengths
are available 510/14″) 
2. Take out clevis pin on the motor. 
3. Loosen the
screws on the motor, and do not take them out completely. 4. Assemble the
canopy, canopy cover and coupling cover to the downrod in turn. 
5. Thread the
motor wire through the lower pull rod, lock the fixing screw with the clevis
pin, and tighten the motor screw.
Step 5: Installation of the Assembled Fan 
1. Lift the
assembled fan onto the mounting bracket. 2. Ensure the concave groove of the
hanger ball is positioned on the hanger lug of the mounting bracket.
Step 6: Wiring Instruction
**** Shut off the power to the fuse box or circuit breaker before
wiring.1. Connect the ceiling power cord to the receiver.
2. The receiver is connected to the motor power cord and the
ceiling power cord respectively.
3. Put the receiver into the mounting bracket.
4. Cover the receiver and power cord and tighten the screws.
5. Decorative cover on, rotate. tighten
Note: Connect wires color to color, plug to plug.
Step 7: Install the Lampshade
1. Put the light cover to the LED board.
2. Spin forward to tighten the light cover. Step 8: Change Downrod(OPT)
How to choose different lengths of downrod
- The ceiling of the house is 100 inches from the ground, suitable for installing a 5-inch downrod.
- The ceiling distance of the house is 110 inches, which is suitable for installing a 10-inch downrod
- The ceiling of the house is 120 inches from the ground, which is suitable for installing a 14-inch downrod
- If the space requires a longer boom, you will need to use a longer extension wire, the wire thickness should be selected close to the motor wire thickness, too thick or too thin (changing the resistance required by the receiver), the motor may not work.
NOTICE
If the house suitable for installing a 1.5m(590 inches), it should a new
controller, Please contact us for customization.
If you need to change different length downrod, please follow these steps:
-
Loosen the screws on the hanging ball.
-
Remove the metal bar.
-
Take off the hanging ball from the original downrod
-
Install the hanging ball to an appropriate downrod.
-
Insert the metal bar and tighten the screws.
OPERATION INSTRUCTION
Control Method
Remote Control 
Code Matching of Remote Controller:
- Turn on the power and press the “FAN ON/ OFF” button on the remote controller for 5 seconds.
- After hearing the buzzer for a long time, the pairing is successful.
- Please complete pairing within 30 seconds after powering on.
3 Color Light:
By quickly clicking it, you’l notice the color change. 3 different
settings.(6000K/3000K/4500K)
Memory Function:
Select the temperature to be memorized, and turn off the light for more than
15s. The next time you turn on the light, it will be the color the last time
you turned it off.
Anti-thief Function:
Click the button, the fan and the light will turn on for 10 mins, and then tun
off. This operation will repeat every 4 hours. No need to worry about someone
breaking into your home.
5 Mins Delay Closing (Fan/Light):
When pressing the delay button, the light and the fan will close after 5 mins.
It can help you walk out of the dark environment.
It is usually used for night.
Button Mute Function:
Remove the beeping sound when clicking the button on the remote.
Note:
Sensing Distance: 33 ft – 49 ft (10 m – 15 m)
Diection of the fan / Reverse Switch
Reversible Function Summer (Forward):
A downward airflow creates a cooling effect.
Winter (Reverse):
An upward airflow increases the indoor temperature.
PS : If you want to change the fan’s rotation direction, please press the
bution while the fan is running.
Timing Control
1H: The fan will automatically shut off after 1 hour.
4H: The fan will automatically shut off after 4 hours.
8h: The fan will automatically shut off after 8 hours.
Close the Timing Control: Press the button “FAN ON/OFF”
SPECIFICATIONS
| Product Name | Ceiling Fan |
|---|---|
| Rated Voltage | 100V-260V |
| Motor Power | 35W/38W |
| control method | Remote Control |
| Lamp configuration | 15W LED |
| N/G.W. | 6.6/7.5KG |
| lampshade size | cp180 mm |
| Motor Spec | 0153’10mm |
| Overall height | 410mm I with 100mm boom i |
| Fan blade | 3 solid wood fan blades |
TROUBLESHOOTING
If there is a problem with the fan during use, please check the following tips for solutions. If the problem still cannot be solved, please contact our after-sales team.
The Fan Dose Not Respond to the Remote Control.
- Check that all wire connections are correct and secure.
- Verify that the power is tumed on and reaching the receiver.
- Verify that the batteries of the remote control are installed with the correct polarity, making sure to install the + (positive) end of the batteries on the solid end and the – (negative) end on the spring.
The Fan Makes a Repetitive Ticking Noise.
- Check for obstructions in the rotor path.
- Make sure mounting hardware at the ceiling is firmly fasten.
- Make sure all other hardware and blade attachments are tight.
- Give the fan a “Break in Period” of a few hours to a few days, then repeat the steps above.
The Fan Makes a Humming Noise.
- Make sure the controls you use are supplied with your fan.
- Make sure all accessories are securely fastened. Loose parts often cause a vibrating noise or buzzing sound.
- Disassemble the fan and reinstalling it can sometimes remedy this resonant vibrating noise.
The Fan Wobbles.
- Make sure the mounting plate and hardware at the ceiling are firmly fastened.
- Make sure all screw fittings on the fan are tight.
- If necessary, use the self-tapping screws provided to further secure the bracket to the joist.
CONTACT INFORMATION
We want to hear your voice! Feel free to touch base if you encounter any issue
when using our product(s) or want to know more about our brand.
We will be more than happy to provide top-notch pre-sales & after-sales
service 24/7.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>