AMOEJOV Hummingbird Feeder Camera Instruction Manual
- May 15, 2024
- AMOEJOV
Table of Contents
AMOEJOV Hummingbird Feeder Camera
Camera Structure
Warning
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates uses and can radiate radio frequency energy, if not installed and
used in accordance with the instructions, may cause harmful interference to
radio communications.
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-
located for operating in conjunction with any other antenna or transmitter.
FCC (USA) 15.9 prohibition against eavesdropping except for the operations of
law enforcement officers conducted under lawful authority, no person shall
use, either directly or indirectly, a device operated pursuant to the
provision of this part for the purpose of overhearing or recording the private
conversations of other unless such use is authorized by all of the parties
engaging in the conversation.
CE RED
This product can be used across EU member states.
Smart Battery Cam comes with a built-in card slot that supports up to 128GB Micro SD card.
- Step 1: Make sure your Smart Battery Cam is power off. Press buttons on both sides, and pull out the back cover.
- Step 2: Open the silicone cover and insert Micro SD card. Make sure you insert it in the correct direction.
- Step 3: Finally push back the back cover.
Battery Charging
The batteries inside the camera are not fully charged according to the
transportation safety regulations. Please charge the batteries with a US Cable
(5V adapter not included).
The LED Indicator will be in solid yellow when charging and will turn to solid
green when it is fully charged. It takes about 8-10 hours to fully charge your
camera.
Set Up With Vicohome App
Download Vicohome App from App Store or Google Play. You can also download the App by scanning the QR code above with the QR code scanner in your smartphone.
Camera connection video
Technical Specifications
Frequently Asked Questions
Why doesn't the Wi-Fi name appear when I connect to Wi-Fi?
Will the camera show red lights when night vision is activated?
The built-in infrared lamp beads make the camera only show some dim red lights when night vision is activated, but the image quality is still clear under no light environment.
What are the requirements for Wi-Fi?
Please use a 2.4GHz wireless network. The device does not support the 5GHz wireless network. Meanwhile, please set the Wi-Fi authentication method to pa2-psk or other lower level of the security method. A password is required
How far should the camera be placed from the router?
After testing, the Wi-Fi connection distance can normally reach up to 100 meters in the open area. However, the actual situation depends on the strength of Wi-Fi and its surrounding environment.
What is the maximum length of recording time?
What should I do when the device is malfunctioning?
Long press the power button to restart the camera
NOTE:When you connect your camera through the app, it will automatically detect if your camera has New firmware available, prompt to upgrade when firmware update version is available. You can also Firmware upgrades are manually detected in the camera settings.