Silverlines AS TS-22-01 Manicure Lamp Glow Bue Arche II User Manual
- May 15, 2024
- Silverlines AS
Table of Contents
Silverlines AS TS-22-01 Manicure Lamp Glow Bue Arche II
Product Information
Specifications
- Model: MANICURE LAMP ARCHE II TS-22-01
- Color: White
- Importer: ACTIVESHOP Sp. z o.o.
- Address: ul. Graniczna 8b, bud. DC2A 54-610 Wroclaw, Poland
- Website:www.activeshop.com.pl
- Nominal Voltage: 220-240 V
- Electrical Power: 40 W
- Rated Frequency: 50/60 HZ
- Color Temperature: 6000 K
Product Usage Instructions
- Connect the manicure lamp to a power source using the appropriate voltage (220-240V).
- Press the on/off button to turn on the lamp.
- Use the brightness increase and decrease buttons to adjust the light intensity as needed.
- Place your hands under the lamp for manicure procedures, ensuring even exposure.
- After use, turn off the lamp and disconnect it from the power source.
Disposal Instructions
At the end of their useful life, old devices should be handed over for reprocessing to appropriate collection points or ACTIVESHOP Sp. z o.o. Company for proper recycling of components.
FAQ
Q: How do I clean the manicure lamp?
- A: To clean the lamp, ensure it is unplugged, then use a soft cloth dampened with water or mild detergent to gently wipe the surfaces. Avoid using harsh chemicals or abrasive materials.
Q: Can I use this lamp for pedicures as well?
- A: While designed for manicures, this lamp can also be used for pedicures, ensuring proper positioning of the feet for effective curing.
Technical data
| Nominal voltage | 220-240 V |
|---|---|
| Electrical power | 40 W |
| Rated frequency | 50/60 HZ |
| Color temperature | 6000 K |
Accessories Schematic Diagram
Attention
- After opening the box, please check that all the accessories from the list above are included.
- Wear gloves to install all accessories from the box.
- Follow all included instructions.
- The rated voltage is 220-240 volts.
- Periodically clean the unit with a clean and dry, possibly slightly dampened with water cloth to prevent accumulation of dirt, dust, and other undesirable substances.
- Accumulation of the above, may lead to malfunction of the device or even damage to the equipment.
- It is not allowed to wrap the power cord around the device, it may cause malfunction of the cable.
- Always make sure that the device is powered from a source with the correct voltage rating.
- Make sure the plug is properly inserted into the socket. Failure to do so can lead to fire, electric shock, or burns.
- The cable must not be modified, stretched, excessively bent, or twisted.
- Nothing heavy may be placed on the cord.
- The device must not be hit or thrown. If the device is damaged by impact or falling, you cannot continue to use it.
- Do not attempt to disassemble or repair the equipment. For repair, contact the distributor, from whom the equipment was purchased or an authorized service center.
Assembly
- Using gloves, take out the lamp and install all accessories.
- Use a screwdriver to attach an iron base to the lamp with the included screws.
- Plug the plug, led from the power supply, into the cable end from the lamp.
- Then connect the device to the power supply with the cable.
- Use the buttons on the remote control to turn on/off/change the brightness of the lamp (picture below).
SAFETY MEASURES
- Do not disassemble the device or attempt to use it for purposes other than those indicated in this manual. All service work and repairs must be performed only by an authorized service technician (ACTIVESHOP SP. Z O.O. company).
- Do not install or operate the device near liquids, wet places, or with wet hands – so that no liquids get into the device.
- Immediately unplug the device from the socket and contact an authorized service provided by ACTIVESHOP SP. Z O.O. in the following cases: (a) liquid has entered the device, (b) the device emits a strange odor, smoke, or makes strange sounds, (c) the power cord has been damaged, (d) the device has been knocked over or its housing has been damaged.
- Do not lay any objects on the cables. Do not install the device in places where someone may step on the power cord.
- For safety purposes, unplug the power cord from the outlet each time you finish working with the device.
- Do not insert anything into the holes of the device. If an unknown object gets into the hole, remove the cable from the socket and contact the distributor or manufacturer.
- Do not place the device on an unstable cart, shelf, or vehicle. If dropped, the device may be damaged.
- To guarantee the established useful life of the device, it is recommended to keep one minute before pressing the power button again (between switching on and off and vice versa).
- The power supply must comply with the specifications on the nameplate. Otherwise, there is a risk of incorrect operation of the device damage and even burning.
CAUTION:
- In case of damage to the power cord or other malfunctions, contact an authorized service center – this will avoid danger.
- This device may be used by children of at least 8 years of age persons of diminished physical and mental capabilities and persons with inexperience and lack of familiarity with the equipment if supervision or instruction on the use of the equipment in a safe manner is provided so that the associated risks are understood.
- The equipment is not intended for play by children. Do not allow children to play with the equipment.
- Do not leave the device unattended when children or persons without sufficient knowledge of the use of the device are near it.
- This electrical device is not a toy. Improper use of it or contact with an electrical device may pose a health risk or lead to death, so use and store the device out of the reach of children.
DISPOSAL OF THE DEVICE
- Dispose of used electrical devices, fixtures, and packaging to raw material reprocessing centers per environmental protection principles. Do not dispose of electrical devices in household waste containers. Follow the rules for discarding this type of equipment.
- To protect the environment under Directive 2012/19/EC on waste electrical and electronic equipment, waste electrical equipment should be collected separately and then sent to collection centers for waste electronic and electrical equipment.
- At the end of their useful life, old devices contain full-value recyclable components, so they should be handed over for reprocessing.
- Therefore, they should be handed over to appropriate collection points, as well as they can also be handed over to the ACTIVESHOP Sp. z o.o. Company.
STORAGE AND TRANSPORT
- The device should be transported at temperatures in the range of (-) 20 °C to (+) 50 °C only in its original packaging. Store the device in a well-ventilated place with a relative humidity of no more than 75%.
- Operating temperature from (+) 10 °C to (+) 40°C.
- During storage and transportation processes, the device must not be thrown or dropped, or exposed to mechanical shocks or atmospheric agents.
- Importer:
- ACTIVESHOP Sp. z o.o.
- ul. Graniczna 8b, bud. DC2A
- 54-610 Wrocław, Poland
- www.activeshop.com.pl
- Rev. A/06/2023
Documents / Resources
|
Silverlines AS TS-22-01 Manicure Lamp Glow Bue Arche
II
[pdf] User Manual
TS-22-01 Manicure Lamp Glow Bue Arche II, TS-22-01, Manicure Lamp Glow Bue
Arche II, Glow Bue Arche II, Bue Arche II
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>