MELENTA H525M Digital Safe Box Fireproof Security Cabinet Safe Instruction Manual
- May 15, 2024
- MELENTA
Table of Contents
INSTRUCTION MANUAL
SAFE BOX MODEL: H525M / H520M
Essentials Overview:
- Personal Code- For daily use and easy to reset periodically.
- Master Code- Take note and used when personal code is forgotten.
- Emergency key- Open safe box and reset personal code
- Battery box Interface- To connect battery box when inserted batteries out of energy.
Operation Guide:
- Set Personal code:
- Make sure the safe box is opened. ( The bolts retract)
- Shut the door, input any 3-6 digit code, and then press ”LOCK”/“#”. Screen show “CLOSED” and safe closed. “????” ????? ?? “#”， “?????” ????? ??”*” ?? former paper ??????
- Input the personal code, and the screen show “OPENED”. The safe opens.
- Set Master code:
- Make sure the safe is opened. ( The bolts retract)
- Press“CLEAR”/”*” twice quickly, screen show “PROG”.
- Input the original master code. (Default code is 000000), the screen show “NEU”.
- Input a new 6 digital master code, screen show “AGAIN”.
- Input the code again, screen show “DONE”.
- The master code is changed. PLS write down the code and not tell anyone.
- Emergency key:
- Remove the cover below keyboard.
- Insert the key and turn clockwise, the safe will open.
- Set new personal code and close the door as above. Only pull the key after safe closed.
- Don’t leave the keys in safe box.
Attentions
- Press “LOCK” /”#”without typing, screen show battery volume with “bA-LO” or “bA-HI”, Or it show “”bA-LO” after close if battery is out of energy. Remember to replace batteries in-time.
- Press ”CLEAR” /”*”to cancel when you type the code wrongly.
- If wrongly input code 3 times, Screen show “HOLD 15” and the safe will keep locked for 15 minutes.
Thanks for selecting our brand and for any problems during use, welcome to contact us through service email: lentarsafe@nbgates.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>