PEICHENG TECHNOLOGY AT81K Kids Tablet User Manual
- May 15, 2024
- PEICHENG TECHNOLOGY
Table of Contents
PEICHENG TECHNOLOGY AT81K Kids Tablet
Specifications:
- Processor: 8.0 RK3326S Quad core 1.5GHz
- Display: 1280*800 Multi-touch screen
- Cameras: 2.0MP Front Camera, 5.0MP Rear Camera
- Battery: 3.8V 4300mAh
- Operating System: Android 12 (Go edition)
- Memory: 2GB RAM, 32GB internal storage
- Connectivity: Wifi 802.11 b/g/n/ax, Type-C
- Charging: DC 5V/2A
Product Usage Instructions
-
Power On/Off:
To power on the device, press and hold the Power button (2) until the device vibrates or the screen lights up. To power off, press and hold the Power button again and follow the on-screen prompts. -
Volume Control:
Adjust the volume using the Volume + (3) and Volume – (4) buttons located on the side of the device. -
Camera Usage:
The device features a Front Camera (5) for selfies and video calls, and a Rear Camera (11) for capturing photos and videos. Open the camera app to start using the cameras. -
Memory Expansion:
Expand the device’s storage capacity by inserting a TF Card Micro SD Card (7) into the designated slot. -
Charging:
Charge the device using the Type-C (8) port with a compatible charger. Ensure to use a DC 5V/2A charger for optimal charging speed. -
Additional Features:
- Headphone Jack (6) for audio output
- Speakers (10) for audio playback
- Reset Button (1) for resetting the device if needed
FAQ:
-
Q: Does the device come with a charger?
A: The device does not include a charger. You will need to use a DC 5V/2A charger for charging. -
Q: What is the operating system of the device?
A: The device runs on Android 12 (Go edition). -
Q: How can I expand the storage capacity of the device?
A: You can expand the storage by inserting a TF Card Micro SD Card into the designated slot.
User manual
SPECIFICATION
- Reset
- Power On / Off
- Volume +
- Volume –
- Front Camera
- Headphone Jack
- TF Card(Mirco SD Card)
- Type-C
- Microphone
- Speakers
- Rear Camera
Android is a trademark of Google LLC.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>