HOLYSTONE 230814 Remote ID Drone User Guide
- May 15, 2024
- HOLYSTONE
Table of Contents
230814 Remote ID Drone
User Guide
OPERATION GUIDE FOR REMOTE ID
DOWNLOAD THE APP
| iOS: | Google Play: |
|---|---|
| 
https://apps.apple.com/us/app/drone-go2/id6450330865|
https://play.google.com/store/apps/details?id=com.hs.dronego
Scan the corresponding QR code to download the Drone Go2 app for free.
Required Operating Systems: iOS 11.0 or later/Android 7.0 or later.
WRITE IN
-
Once paired, the drone’s light will turn solid. The Remote ID has now entered the write-in state. * The drone’s light changes from flashing to solid.
Note: Once the drone has completed its initial pairing, it will automatically begin geomagnetic calibration. During this process, the drone’s light will flash, signaling that it has entered the write-in state. -
Activate Bluetooth, launch the Drone Go2 app, and then hit the “ ” icon to initiate a search.
-
Tap on the series number of your Remote ID in the list.
-
Input “Operator ID”, than tap “SAVE”.
- You need to visit the official website of the local aviation authority or aviation regulatory agency and register to obtain an “Operator ID”.
5. Tap “Confirm”. The Remote ID will enter broadcasting mode. (You don’t need to restart the drone. The drone is ready for takeoff now.)
TO ALTER INFORMATION
- Once paired, press and hold the button located at the top left corner of the transmitter. You will first hear a double beep, followed by a triple beep from the transmitter.
- Once the drone’s light changes from flashing to solid, you can alter the information now. * The drone’s light changes from flashing to solid.
- Activate Bluetooth, launch the Drone Go2 app, and then hit the “ ” icon to initiate a search.
* Be sure to turn on Bluetooth in the cellphone. - Select the previously connected Remote ID series number in the list.
- Tap “Delete,” then tap “Confirm.” The previously written Remote ID information is now deleted. You can put in new Information now.
