Lockdown 1135972 Vault Retrofit Keypad Instructions

**Lockdown 1135972 Vault Retrofit Keypad Instructions

**

ASSEMBLY INSTRUCTION

Main function and features

1. **** Unlock electronic lock body (compatible with models made by NL, Securam and S&G)
2. Measure temperature and humidity using a wired probe (not wireless)
3. Connect to the internet via Wi-Fi and report status using MQTT.
   • Wi-Fi provisioning done via Bluetooth Low Energy (BLE)
4. Software updates via Wi-F

Operating Instructions

Unlock the Door

1. Enter PIN code using the numpad.
2. Wait for lock body to unlock or display an error message if PIN is incorrect

Change Settings

1. Press the gear symbol on the numpad.
2. Enter Master PIN code and press the Lockdown logo.
3. Choose the settings options you want to change.

Connect to Wi-Fi

1. Enter the Settings menu (see 2.2)
2. Tap on the Wi-Fi option.
3. If Wi-Fi is off, turn it on using the slider.
4. Tap “Setup”.
5. Open the Lockdown App and select “Add New Device”.
6. Select your device from the list.
7.  Choose the Wi-Fi network you want to connect to (only compatible with 2.4GHz).
8. Enter your Wi-Fi password.
9. Wait for the keypad to connect to router and authenticate with server.

Software Update

1. Connect to Wi-Fi (see 2.4)

2. Navigate to “Update” in the Settings menu.

3. Tap Update
   a. The system will automatically check for any available updates.

4.  If an update is available, tap “Yes” to update.

5. Wait for update to complete.
   a. System will automatically reboot once update is complete.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for com pliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, p ursuant to Part 15 of the FCC Rules. These limits are designed to provide reasona ble protection against harmful interference in a residential installation. This equip ment generates uses and can radiate radio frequency energy and, if not installed a nd used in accordance with the instructions, may cause harmful interference to ra dio communications. However, there is no guarantee that interference will not occ ur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to whic h the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the fo llowing two conditions: (1) This device may not cause harmful interference, and
  (2) this device must accept any interference received, including interference that m ay cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. The dev ice can be used in portable exposure condition without restriction.

IC warning:
This device contains licence-exempt tasmittre(s)/receiver(s)/ that comply with In novation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure: This equipment complies with Canada radiation exposure li mits set forth for an uncontrolled environment; To maintain compliance with IC’s RF Exposure guidelines, This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>