Danfoss PC 78xA IDCM Programming Software User Guide
- May 15, 2024
- Danfoss
Table of Contents
Danfoss PC 78xA IDCM Programming Software
Specifications
- Model: AK-PC 78xA
- IDCM Programming
- LT IDCM Compressor Setup
- IDCM Compressor AO Setup
LT IDCM Compressor Setup
Follow these steps to set up the LT IDCM Compressor:
- Ensure
Speed comp. LT-1 AO’ is wired directly toPI-2 in voltage’ AI. - Module and point numbers are used as examples only.
PI Controller Setup
For setting up the LT IDCM Compressor General Purpose PI Controller:
- Use PI-2 as an example to create `PI-2 in voltage’ AI.
- Module and point numbers are used as examples only.
PI-2 in Voltage AI Setup
Set up the PI-2 in voltage AI using the following steps:
- Module and point numbers are used as examples only.
PI-2 Analog Output Setup
To complete the IDCM programming, follow these steps:
FAQ (Frequently Asked Questions)
- Q: What is the purpose of LT IDCM Compressor Setup?
A: The LT IDCM Compressor Setup is designed to configure the compressor settings for optimal performance.
Programming Guide
AK-PC 78xA IDCM programming\
LT IDCM Compressor Setup
IDCM Compressor AO Setup
- ‘Speed comp. LT-1 AO’ is wired directly to ‘PI-2 in voltage’ AI created in next step.
- Module and point numbers used as example only.
LT IDCM Compressor Gen Purpose PI Controller Setup
PI-2 in voltage AI Setup
- Module and point numbers used as example only.
- PI-2 used as example only.
PI-2 Analog Output Setup
IDCM programming complete.
Danfoss A/S
Climate Solutions • danfoss.com • +45 7488 2222
catalingues descriptions ad, Vertisemits ete. and whation made available in
writing, orally, etectronically odie desian wend, smal bie considered
informative, anchis only bia in groand manuals, bates reserveste right to ate
in proctatis without notice. This also applies to products ordered sut not
differed provided that suatalierations cautes made without changes to form, it
or All trademarks in this material are property of Danfoss A/S or Danfoss
group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S.
All rights reserved.