Vigoexpress at Curlbliss Automatic Hair Curler User Manual
- May 15, 2024
- Vigoexpress at
Table of Contents
Vigoexpress at Curlbliss Automatic Hair Curler User Manual
CURLBLISS – USER MANUAL
PARTS OVERVIEW
- U-slot (Where you can put ypur hair)
- Heating tube
- Curl button
- LCD screen
- Adjustment button
- Power switch
- USB cable
- USB charging port
LCD display features:
a. Left
b. Right
c. Current temperature
d. Heating display – the indicator will flash when the product is heating and,
when the heating is complete, the light will shine continuously
e. Time
f. Battery level display – when four tiles are displayed, the product is fully
charged
Warning:
Do not approach the bathtub, washbasin and other containers of water when using the appliance. Do not splash or drip water or other liquids onto the product. If the product accidentally falls into water, DO NOT TOUCH it directly with your hands and turn the power off immediately.
DESCRIPTION OF THE USE OF THE FUNCTION OPERATION
How to turn on and off
In the power-on or shutdown state, press and hold the power switch for 3
seconds, then you can turn on and off.
How to adjust the temperature
In the power-on state, press the setting key, the temperature number will
appear flashing state. At this time, press the adjustment key to adjust to the
desired temperature (temperature can be adjusted between 150 °C to 200 °C )
How to adjust the direction of curls
In the power-on state, press the two set buttons, the curling direction (L/R)
will appear flashing state.
At this time, press the adjustment key to select the curling direction. (L:
for left winding /R: for right winding hair)
How to switch °C and °F
In the power-on state, press set buttons three times and the temperature unit
( °C ) will blink, and then press the adjustment key to select the Celsius
(°C) or Fahrenheit ( °F) to display.
How to adjust the number of heating seconds
In the power-on state, press the set button four times, and the heating
seconds will appear flashing state. At this time, press the adjustment key to
adjust to the desired number of seconds (heating seconds can be adjusted
between 8/10/12/14/18 seconds)
SIMPLE ILLUSTRATION DESCRIPTION
Step 1
As shown, extract the appropriate amount of hair and put it in the U-shaped
groove.
Step 2
Press and hold the curl button again and do not release, it will start to automatically roll hair into the heating tube. About 4 seconds after the countdown to the short beep sound, you can release the button.
Step 3
You can pull your hair out until the preset heating time is over (there will
be a long beep).
HOW TO USE
- Before use, it is recommended to comb the whole hair loose to reduce knotting, and it can make the hair looser and more relaxed, so that there will be no hair problem.
- Press and hold the power on the key three seconds to turn on the host, at this time the LCD screen display will light up the white font. The heating indicator will start flashing. and the machine will start to automatically heat to the default temperature (150 degrees ). About 1 minute after the heating to the default temperature, at this time you can hear a beep and the heating indicator will be constantly lit. then you can start to use. The default temperature of the machine is 150 degrees, and the default heating time is 12 seconds. To adjust the default temperature, heating seconds, and direction, you can refer to the function adjustment mode description.
To have a clear degree, you can set 180 to 200 degrees/15 seconds; For a more natural degree of visibility, set to 150 degrees/about 12 seconds.
The built-in temperature is 150 degrees to 200 degrees, the number of built-in heating seconds selected for 8, 10, 12, 14, 16, 18 seconds, you can adjust the temperature or time
- This default value is suitable for the medium amount of hair of heating temperature and heating time. If the hair amount is much, but you want the hair to be more obvious, you can change the temperature setting.
- When you take the swashes, you will extract a handful of the appropriate amount of hair loose placed in the top of the hair loose into the groove, and then press and hold the suspension key, will start to automatically loose the head into the heating tube, about 4 seconds after the countdown to the short beep sound can release the button, until the default heating time after the countdown (there will be a long beep), you can pull the hair loose, and then follow the above-mentioned steps to repeat.
- After 10 minutes, you can hear the short sound (beep, beep, beep),If there is no action when the alarm sounded, it will automatically shut down after 1 minute.
- After use, press the key and hold the power supply open for three seconds to turn off the host, and set aside to wait for the heating tube to cool before storage.
- This product is not touchable with water. Before the moisture is dry after taking a bath or shower to wash your hair, do not use this machine, so as not to damage the machine and the effect is not obvious.
CHARGING METHOD
- Before charging, please turn off the host power, and then connect to the USB charging cable for charging.
- Plug one end of the USB charging cable into the bottom of the host, and the other end can be connected to the desktop computer, pen and power, mobile power supply, USB hole of USB transformer to charge. Please note that if charging with a USB transformer, do not use a transformer with output specifications greater than DC 5V.
- When charging, the battery residue symbol in the host LCD screen will start flashing incrementally, indicating that it is charging.
- After charging for about 4 hours each time, after full charge, the battery residue symbol will show the full state. After full charge, it can be used for about 50 minutes. Pay attention to the charging time to unplug yourself to prevent overcharging from affecting the normal life of the battery. Take the middle and long hair as an example, use 4 times one week (each use about 10 to 15 minutes) and then charge.
- Strictly prohibit the use of charging side. When the host is charging, do not turn on the host power use at the same time, so as not to cause damage to the host or battery. In this case, it is not within the scope of the warranty.
- Even if it’s not in use for a long time, charge once every two months to ensure the normal life of the battery.
CLEANING AND MAINTENANCE PRECAUTIONS
This machine is not waterproof! When cleaning the product, it is strictly forbidden to wash with water or immersed in water or other liquids to avoid short circuits.
- The body is not waterproof. When cleaning, the appearance can be wiped with a cloth. When wiping the internal stick, you need to unplug it. when the standby body is cooled, use the cotton stick to spray some alcohol deep wipe. When collecting, it can be put in the attached collection bag.
- After use, be sure to turn off the power switch and wait for the thermal panel to cool down before collecting.
- Please place in a place where the child can not get. After turning on the power, do not touch the thermal panel by hand, so as not to cause burns. When it’s not in use, be sure to turn off the power.
- This appliance is not expected to be used by users with insufficient physical, sensory, mental, experience or knowledge.(including children), except under the custody or direction of a person who is responsible for their safety. Children should be monitored to ensure that they do not play with electrical appliances.
- If the USB charging cable is damaged, please replace the new cable and do not continue to use it.
- When it’s in use, if the product has smoke or sparks, please turn off the power as soon as possible, and immediately notify the after-sales service.
INSTRUCTIONS FOR RECYCLING AND DISPOSAL:
This label means that the product cannot be disposed of as other household waste throughout the EU. To prevent potential damage to the environment or human health from uncontrolled waste disposal. Recycle responsibly to promote the sustainable use of material resources. If you want to return a used device, use the drop-off and collection system, or contact the retailer from whom you bought the product. The retailer can accept the product for environmentally safe recycling.
A declaration by the manufacturer that the product complies with the requirements of the applicable EU Directives.