OEHLBACH BTR Innovation 5.2 Bluetooth Transmitter Instruction Manual

OEHLBACH BTR Innovation 5.2 Bluetooth Transmitter

Thank you for choosing an Oehlbach quality product. Please read these operating instructions in detail to ensure unrestricted and error-free operation of the device.

The Oehlbach
BTR Innovation 5.2 is a Bluetooth audio receiver/ transmitter with an OLED display specially designed by Oehlbach® Theproduct is equipped with the Qualcomm QCC3040 main chip and is characterized by its high sound quality as well as compatibility. For example, they can connect cell phones, computers and other digital devices to the BTR Innovation 5.2 via Bluetooth, and enjoy their favourite music. In addition, audio signals from TV, MP3 players or other audio devices can be forwarded to Bluetooth headphones or speakers via the BTR Innovation 5.2.

Package contents

• 1x Oehlbach®
• BTR Innovation 5.2
• 1x 2 Y-Cinch to 3.5 mm jack
• 1x 3.5 mm jack to 3.5 mm jack
• 1x Instruction manual

Functions

• 2in1 Bluetooth®
• Adapter
• Bluetooth®
• version 5.2
• Transmitter (TX) and receiver (RX) in one device
• Can be paired with 2 devices simultaneously aptX™
• HD for CD-quality audio transmission
• Very low latency (>40 ms)
• Battery operation: >20 hours of operation in receive mode and >20 hours in transmit mode
• Charging time: approx. 2.5 hours at 5V DC ≥550mA

Key assignment

1. Display
2. Volume – / Next track / Navigate downwards
3. OK confirmation button, play and pause during music playback in RX mode.
4. In RX mode: double click to switch to game mode
5. In TX mode: double-click to switch the audio codec
6. Volume + / Previous title / Navigate upwards
7. Coupling mode
8. Operating mode switch (TX/RX)
9. Power on/off button
10. Charging input port (USB-C™ DC-5V)
11. 3.5mm audio interface (sound input/output)

Display description

Specification

• Bluetooth®
• version: 5.2 – aptX™  Aptx™
• LL HD, Low Latency, SBC, A2DP AVRCP
• Chipset: Qualcomm QCC3040
• Range: >10m outdoor
• Temperature range: -10 to +55 °C
• Permissible relative humidity: 5 to 90%.
• Power supply: 5V 260mABattery: 550mAh Li-Ion Polymer
• Dimensions: 50 x 51 x 18.5 (W x H x D in mm)
• Weight: 0.035 kg
• Frequenzband: 2,402GHz-2,480Ghz
• Connections: 3.5mm audio, USB-C™

Functional description

Switch on and off
(Please allow more than 3 seconds between switching the device on and off ). Press and hold the power button of the device for 3 seconds, the display indicator lights up or goes out and the the device turns on or off.

Automatic reconnection to the device
Turn on the Oehlbach® BTR Innovation 5.2 and the device will automatically return to the connection state, or click the pairing button to reconnect.

Status of the connection search
Double-click the pairing button on the device to quickly access the pairing search.

Delete paired devices
If the device is turned on and you press and hold the pairing button for 8 seconds, the display will reboot and delete the paired device.

Low battery alarm
When the battery level is low, the device warns automatically (flashing symbol on the display and red charging light); if the battery level falls below the limit of 3.05 V, the device switches off automatically.

Automatic shutdown
The Oehlbach® BTR Innovation 5.2 switches off automatically if there is no Bluetooth connection for 10 minutes. Automatic screen shutdown (power saving mode) The device automatically turns off the screen after 3 minutes of non-use to save power. Press any key to activate the screen again.

Standby status of the device
When the device is on standby mode and the status indicator shows „Waiting…“, double-click the device‘s pairing button and the device will switch back to pairing mode.

Key function

In RX mode

• Decrease volume – / double click to play next song / move down the list
• Increase volume + / double click to play the previous song / move up the list
• Confirm selection, play music / double click to switch to game mode
• Back / double-click to start pairing

In TX mode

• click down in the list
• Move up in the list
• Confirm selection / double click to switch audio encoding
• Back / double-click to start pairing

Logout of paired devices
Press the OK button for 2 seconds during the connection to display the cursor. You can move the cursor with the Up and Down keys and confirm with the OK to delete the connected device.

Game mode (RX mode)
During playback in RX mode, double-click the OK button to switch to low- latency play mode.

Switching the audio coding (transmit mode)
During TX connection playback, double-click the OK button to switch the audio codec.

Functions

RX Receive mode
The BTR Innovation 5.2 can transfer music via Bluetooth connection from, for example, cell phones or computers via AUX / 3.5mm jack to audio devices such as stereos or their car.

1. Press and hold the power switch of the device for 3 seconds, the display lights up and the device is switched on.
2. Switch the page mode switch to the RX side and the device will enter RX mode.
3. The status sign on the device display indicates a change from „Connecting…“ to „ Pairing…“ (blue light on the device flashes).
4. Plug the 3.5MM audio cable into the AUX port of the device and the other end of the audio cable into the audio input of your stereo or car stereo.
5. Turn on the Bluetooth function of your phone, click Search Bluetooth Device, select the „BTR Innovation 5.2“ device in the Bluetooth list and connect it.
6. After a successful connection (the blue light on the device lights steadily), the display shows the name of the connected device and the audio codec when playing music.

TX transmit mode
In transmit mode, the BTR Innovation 5.2 can be used, for example, a TV to wirelessly transmit audio to a Bluetooth device such as Bluetooth headphones or a Bluetooth speaker.

1. Turn on the Bluetooth headphones or Bluetooth speaker and put the respective device into pairing status.

2. Press and hold the power switch of the BTR Innovation 5.2 for 3 seconds, the display lights up and the device is switched on.

3. Switch the page mode switch to the TX side and the device will go into TX mode.

4. The status sign on the device display indicates a change from „Connecting…“ to „Searching…“ (the blue light on the device flashes).

5. Or double-click the pairing button on the device to quickly enter the searching mode (blue light flashes on the device).

6. Plug the 3.5mm audio connection cable into the AUX port of this unit, and the other end of the audio cable into the the audio output port of the TV or other audio equipment in your home.

7. The device creates a list of Bluetooth device names that can be selected using the up and down buttons on the device and selected using the OK button.

8. After a successful connection (the blue light on the device is on continuously), the display shows the name of the connected Bluetooth device and the audio codec when transferring music.
   Notes:

   • Establishing a connection can take different amounts of time for different Bluetooth devices, due to different protocols. If the connection is not successful for a longer period, you can restart the device and try to connect again.
   • TX mode: The blue status light on the device flashes rapidly for searching Bluetooth devices (such as Bluetooth headphones or speakers).
   • It is recommended to set the Bluetooth speaker or headset to pairing status first, then start the BTR Innovation 5.2 and begin pairing. This can improve the connection speed.
   • If the audio does not sound normal (no sound, stuttering, or noise) after connecting to the Bluetooth device, you can double-click the OK button to change the audio encoding to SBC.

Connecting two devices in TX and RX mode
Refer to the connection procedure above to connect to the Bluetooth device A (Bluetooth headset or speaker).

1. After Bluetooth device A is successfully connected, please turn on Bluetooth device B and put it into pairing mode.
2. Double-click the pairing button and the BTR Innovation 5.2 will switch back to search mode (green light flashing fast).
3. The BTR Innovation 5.2 starts searching for available Bluetooth devices in range and generates the Bluetooth device names in a list.
4. Use the up and down keys of the device and the OK key to select your Bluetooth device B from the list.
5. After a successful connection (the green light is always on), the display shows the names of the connected Bluetooth devices and the audio codec when transferring music.

Notes

• If you cannot connect to Bluetooth device B, double-click the pairing button on the device to try connecting again.
• If the connection is not successful for a long time, you can restart the device and repeat the procedure. Another possible solution is to turn off the surrounding Bluetooth devices to avoid misconnection issues.
• If the audio does not sound normal (no sound, stuttering, hissing) After connecting to the Bluetooth device, you can double-click the OK button to switch the audio encoding to SBC.

Important safety instructions
To avoid the risk of fire, electrical short circuit or damage to the product, please follow these instructions:

1. Do not expose the product to rain or moisture. Do not place containers filled with water on the device.
2. Do not install the device on a bookshelf, built-in cabinet or similar confined space. Make sure that the device is well-ventilated.
3. To prevent an electrical short circuit or fire due to overheating, do not cover the unit or place any objects on top of the unit.
4. Do not position the device near heat sources such as heaters, ovens, etc.
5. Do not use near open flames or candles.
6. Clean the device only with a dry cloth.
7. Unplug the unit during lightning storms or when unused for long periods.
8. Protect the power cord from forces such as crushing or impact.
9. Use only the accessories supplied.
10. In case of service, please contact qualified service personnel only.

Notes on the charging function and battery

• Standard charging voltage: 5V+/-0.25V
• Charging current: About 260mA on average
• This product has a built-in battery for long standby and usage times. The device will automatically alarm when the battery is low (the power icon on the display and the red charging light flashes) and needs to be charged.
• (It is recommended to fully charge the device before first use).
• Plug one end of the USB-C charging cable into the product‘s charging port and the other end into a standard USB 5V power outlet (such as a phone charger or computer USB port).
• The charging time is about 2.5 hours.

Caution

• If the battery power is too low or the quality of the charging the power supply is poor, power disturbances may occur during charging.
• Frequent charging and simultaneous use of the BTR Innovation 5.2 may affect the battery life.
• Please do not use the BTR Innovation 5.2 with too low a battery level. Use with too low a battery level over a long period may result in the
•  automatic battery protection not being able to be switched on.

Compliance with EU directives
This product is allowed to carry the CE mark. It complies with the EU Low Voltage Directive 2014/35/EU; EU Electromagnetic Compatibility Directive 2014/30/EU; EU RoHS Directive 2011/65/ EU; EU Waste Electrical and Electronic Equipment (WEEE) Directive 2012/19/EC.

Hereby, Oehlbach
Kabel GmbH declares that the device Oehlbach BTR Innovation 5.2 complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can obtain a free copy of the Declaration of Conformity by contacting your distributor, sales or Oehlbach® Kabel GmbH headquarters. The contact information can be found at http://www.oehlbach.com. The Declaration of Conformity can be found at http://www.oehlbach.com/compliance/6054

• Operating frequency: 2402-2480 MHz
• Maximum radiated power according to EN 62479: 3.7 dBm

Guarantee

Congratulations! Your wise choice has made you the owner of an Oehlbach® product. Our products enjoy an excellent reputation worldwide due to their high quality. This high standard of quality allows us to offer a 2-year warranty on this product. Our products are continuously checked and tested during the entire manufacturing process. In case of service please note the following:

1. The warranty period begins with the purchase of the product.
2. During the warranty period, we will remedy any defects that are demonstrably due to material or manufacturing faults, at our discretion, by replacing or repairing the defective parts.
3. Further claims, in particular for reduction, cancellation, compensation or consequential damages are excluded. The warranty period shall not be affected by any warranty service provided by us.
4. The product must not have been tampered with inappropriately.
5. If you wish to claim the guarantee, please contact your specialist dealer first. Should it prove necessary to return the product to us, please ensure that:
   • the product is sent in perfect original packaging,
   • the purchase receipt is enclosed.
6. Excluded from the guarantee are:
   • Illuminants / wearing parts
   • Transport damage, visible or invisible (claims for such damage must be made immediately to the transport company, railway or post office).
   • Scratches in metal parts, front covers, etc. (These defects must be claimed directly from your dealer within
   • 5 days of purchase).
   • Defects caused by incorrect installation, incorrect connection, improper operation (see operating instructions), stress or external violent influence.
   • Improperly repaired or modified units that have been opened by someone other than us.
   • Consequential damage to third-party equipment
   • Reimbursement of costs in the event of damage being repaired by third parties without our prior consent.

Disposal instructions

According to the European Directive 2013/56/EU, all electrical and electronic equipment must be disposed of separately via local collection points. Please observe the local regulations and do not dispose of your old devices with normal household waste!

Old equipment return option
Separate collection of old equipment: Electrical and electronic equipment that has become waste is referred to as old equipment. Owners of old equipment must dispose of it separately from unsorted municipal waste. Old appliances do
not belong in household waste but in special collection and return systems.

Batteries and accumulators as well as lamps: Owners of old appliances must separate old batteries and accumulators that are not enclosed by the old appliance from the old appliance before handing them in at a collection point. This also applies to lamps that can be removed from the waste equipment without being destroyed. If the waste equipment is to be prepared for reuse with the participation of a public waste management authority, batteries and accumulators as well as lamps do not have to be removed.

Options for returning old appliances: Owners of old appliances from private households can return them free of charge to the collection points of the public waste management authorities or to the take-back points set up by manufacturers or distributors. Stores with a sales area of at least 400 m² for electrical and electronic equipment and those grocery stores with a total sales area of at least 800 m² that offer electrical and electronic equipment several times a year or permanently and make it available on the market are obliged to take it back. This also applies to online or catalogue sales if the storage and shipping areas for electrical and electronic equipment are at least 400 m² or the total storage and shipping areas are at least 800 m².

Distributors must generally ensure the take-back by providing suitable return facilities within a reasonable distance from the respective end user. The possibility of returning an old appliance free of charge exists for distributors who are obliged to take it back, among other things, if a new appliance of the same type, which essentially fulfils the same functions, is delivered to an end user.

If a new device is delivered to a private household, a similar old device can also be handed over there for collection free of charge. In the case of online or catalogue sales, this applies to equipment in categories 1, 2 or 4 as defined in Section 2 (1) of the Electrical and Electronic Equipment Act, namely „heat transmitters“, „display screen equipment“ or „large appliances“ (the latter with at least one external dimension exceeding 50 cm). End users are asked about their intention to return the equipment when they conclude a purchase contract.

In addition, small appliances-ces that do not exceed 25 centimetres in any external dimension can be returned free of charge to the distributors‘ collection points, irrespective of the purchase of a new appliance, and this is limited to three old appliances per type of appliance. Data protection notice: Old devices often contain sensitive personal data. This applies in particular to information and telecommunication – ons technology devices such as computers and smartphones. In your interest, please note that each end user is responsible for deleting the data on the old devices to be disposed of.

Meaning of the „crossed-out wheeled garbage can“ symbol: The symbol of a crossed-out wheeled garbage can regularly displayed on electrical and electronic equipment indicates that the respective device must be collected separately from unsorted municipal waste at the end of its service life.

OEHLBACH
Kabel GmbH
Frankfurter Straße 720 – 726 D-51145 Köln
Tel.: + 49 2203 2974 – 700 Fax: + 49 2203 2974 – 729
www.oehlbach.com E-Mail: infoline@oehlbach.de

References

• OEHLBACH® - Hochwertige Audiokabel, Stromversorgungs- und AV-Zubehörprodukte für Heimkino und professionelle Installationen
• BTR Innovation 5.2
• OEHLBACH® - Hochwertige Audiokabel, Stromversorgungs- und AV-Zubehörprodukte für Heimkino und professionelle Installationen
• BTR Innovation 5.2

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>